• 한국전자파학회논문지
• /
• 제15권9호
• /
• pp.809-819
• /
• 2004

본 논문에서는 M/W 중계 주파수의 증설 또는 신규 수용을 가급적 배제하고 필요 회선을 B-WLL 또는 광통신망으로 대체 가능성을 품질 및 경제성 측면에서 분석하였다. 품질 목표에서는 매체간 비교를 위한 전제조건 및 분석방법을 도출하였다. 그리고 E1급을 기준으로 비트오율(BER) $10^{-6}$ 을 만족하도록 기준을 설정하고, 매체별로 가용도에 대한 거리를 산출하였다. 또한 경제성 측면에서는 광통신, M/W, B-WLL 시스템의 기본 구성 단위를 기반으로 서비스 기간, 장비용량, 전송거리, 대용량 전송으로 분류하고 다양한 광전송 회선 및 B-WLL 구성에 대해 분석하였다. 목표 가용도를 99.999 %로 설정시 B-WLL로 M/W를 반경 1.6 km까지 대체 가능하다는 것을 알 수 있었다. 또한 광으로 대체할 경우, 광 관로용의 전주 임대 시에는 서비스 기간에 관계없이 M/W보다 경제성이 있으며, 광 관로 자체를 굴착할 경우에는 고려 방법 중의 어느 경우에 대해서도 경제성이 없는 것으로 판명되었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.858-864
• /
• 2017

This study aims to restrain free conducting wire-type particles which are commonly and dangerously existing within DC gas-insulated transmission lines. A realistic platform of a coaxial cylindrical electrode was established by using a high-speed camera and a partial discharge (PD) monitor to observe the motion, PD, and breakdown of these particles. The probabilities of standing or bouncing, which can be affected by the length of the particles, were also quantitatively examined. The corona images of the particles were recorded, and particle-triggered PD signals were monitored and extracted. Breakdown images were also obtained. The air-gap breakdown with the particles was subjected to mechanism analysis on the basis of stream theory. Results reveal that the lifting voltage of the wire particles is almost irrelevant to their length but is proportional to the square root of their radius. Short particles correspond to high bouncing probability. The intensity and frequency of PD and the micro-discharge gap increase as the length of the particles increases. The breakdown voltage decreases as the length of the particles decreases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.173-175
• /
• 2012

Temperature during concrete curing can be effectively used to predict the early age strength of concrete However, various current methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. This paper presents the results of our investigation of an all-in-one Wireless sensor network (WSN) for the management of the curing temperature of in-placed concrete at early curing stages. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. The field experiment entailed measuring the curing temperature of concrete using the WSN. After fresh concrete was poured into the formworks, the signals were measured at a 150 m radius from the field office. The signal was acquired for 28 days without any dispersion or interruption at the construction site; therefore, this study confirms the applicability of the proposed system to a construction site.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.13-17
• /
• 2002

Ga$_2$O$_3$ nanomaterials were synthesized from mechanically ground GaN powders with thermal annealing Ga$_2$O$_3$ nanobelts were farmed in a nitrogen atmosphere, while Ga$_2$O$_3$ nanoparticles were formed inan oxygen atmosphere. The structural properties of the Ga$_2$O$_3$ nanomaterials were investigated by X-ray diffractometer (XRD) and high-resolution transmission eleotron microscope (HRTEM). The study of field emission scanning electron microscopy (FESEM) on the microstructures of nanomaterials revealed that the nanobelts are with the range of about 10∼200nm width and 10∼50nm thickness, and that nanoparticles are with the range of about 20∼50nm radius. On the basis of XRD and HRTEM data, we determined that the nanobelts grow toward a direction perpendicular to the (010) lattice plane and that they are enclosed by facets of the (10T) and (101) lattice planes. The formation of the nanobelts may be described by the vapor-solid(VS) mechanism, and the supersaturation device of gaseous phase may play an important role in the formation of Ga$_2$O$_3$ nanomaterials.

• 대한전자공학회논문지
• /
• 제13권1호
• /
• pp.16-22
• /
• 1976

비가역성 소자인 광대역 마이크로스트립 Y형 써어클레이티는 Bosma의 Green함수를 적용하여 Rosenbaum이 해석하띠 산란행렬로 실제적 이론치인 삽입손실, 아이솔궤이션을 구하였다. 중요한 설계 변수로는 전봉선과 접합각인 ${\psi}$이고 이를 알맞게 선택하여 광대역 정합을 이루었다. 또한 Y형 써어쿨레이터의 입력칟지던스를 구하였다. 제작시 실표반학은 이론치보다 7.5% 적은것을 요하며 5-11GHz에서 V.S.W.R.은 1.5이하였고 최대 삽입손집은 0.5dB, 아이슬레이션은 15dB 이상이었다.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.965-971
• /
• 2001

$\beta$-Ga$_2$O$_3$ nanobelts and nanoparticles were synthesized from mechanically ground GaN powders with thermal annealing in a nitrogen atmosphere and an oxygen atmosphere, respectively. The study of field emission scanning electron microscopy (FESEM) on the microstructures of nanomaterials revealed that the nanobelts synthesized in the nitrogen atmosphere are with the range of 20~1000nm width and 10 ~100nm thickness, and that nanomaterials are nanoparticles with 20~50nm radius obtained by thermal annealing in an oxygen atmosphere. The crystal structure of the $\beta$-Ga$_2$O$_3$ nanobelts and nanoparticles was in this study investigated by X-ray diffractometer (XRD) and high-resolution transmission electron microscope (HRTEM). The formation processes of the nanobelts and nanoparticles will be discussed in this paper.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.181-188
• /
• 2009

The electrical property and microstructure in $BaTiO_3$ ceramics doped rare-earth ions with intermediate ionic size ($Dy^{3+},Ho^{3+},Y^{3+}$) were investigated. Microstructures have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). Incorporation of rare-earth ions to $BaTiO_3$ ceramics depended on their ionic radius sensitively. Compared to Ho and Y ions, Dy ions provide $BaTiO_3$ ceramics with the high rate of densification and well-developed shell formation, due to their high solubility in the $BaTiO_3$ lattice, but the microstructure of Dy doped $BaTiO_3$ ceramics is unstable at high temperature, because Dy ions could not play a role of grain growth inhibition, leading to diffuse into $BaTiO_3$ lattice continuously after completion of densification during sintering. Comparing electrical property and microstructure, it is shown that the reliability of capacitor improved by high shell ratio.

• 한국전자파학회논문지
• /
• 제8권5호
• /
• pp.462-475
• /
• 1997

본 논문에서는 초고주파 통신용 부품에 많이 이용되는 내부에 금속봉과 다른 불연속 구조물이 존재하는 구형 도파관에 대하여 모드 매칭법과 등가 전송선로 이론을 이용한 전자계 해석으로 금속봉의 반경과 높이 그리고 다른 불연속 구조물의 반사계수 변화에 따른 도파관의 임피던스를 계산하는 방법을 제시하였다. 본 논문에서 제시한 방법으로 금속봉과 다른 불연속 구조물이 함께 구형 도파관을 구성할 경우 두 불연속 구조물간의 거리, 반사계수 및 금속봉의 높이와 반경에 따른 임피던스를 계산하였고 이 때 금속봉에 대하여 계산된 임피던스는 Marcuvitz에 의하여 제시된 실험값과 잘 일치함을 보였다.

• 한국광학회지
• /
• 제22권1호
• /
• pp.40-45
• /
• 2011

동일한 주회 길이의 통상적인 DCRR (Double-coupler Ring Resonator) 에 비하여 두 배의 FSR (Free Spectral Range) 성능을 나타낼 수 있는 TCRR (Triple-coupler Ring Resonator: 삼중 결합 링 공진기) 필터의 설계 및 제작에 대하여 논의하였다. 열-광학 특성이 우수하고, 코어-클래딩 굴절률 차가 큰 폴리머 물질을 이용하여 작은 반경의 곡선도파로가 가능한 매립형 도파구조의 컴팩트한 TCRR 필터를 설계 및 제작하였다. 파장가변 레이저와 광섬유 배열 블록을 이용하여 TCRR 필터의 Through 및 Drop 포트 출력 특성을 측정한 결과, DCRR 필터의 두 배인 4.4 nm의 FSR을 확인하였고, 이는 전달행렬 방법을 이용하여 해석한 결과와 거의 동일하였다.

• 한국동물위생학회지
• /
• 제25권1호
• /
• pp.75-86
• /
• 2002

Outbreaks from September 1999 to July 2000 of blackleg in 4 milking and fatting cattle farms in the vicinity of Munkyong(northwestern part of Gyeongbuk province) were investigated biochemical characteristics of isolates and were surveyed epidemiological works during the period of 2 months from August to September 2000. Clostridium chauvoei, the etiological agent of blackleg is a serious pathogen of cattle and sheep causing fever, depression and lameness with high mortality in growing phase of 6 to 18 months old mainly beef cattle. Biochemical and cultural properties of 4 isolated Cl chauvoei were identical to those of reported results and isolates were susceptible to ampicillin, bacitracin, chlorarnphenicol, cephalothin, ciprofloxacin, erythromycin, norfloxacin, penicillin, and tetracycline, while they were resistant to amikacin, colistin, gentamicin, kanamycin, neomycin, streptomycin and trimethoprim-sulfamethoxazole. In the results of epidemiological survey, outbreak farms that concentrated region of milking or fatting cattle in each sites were so close contact within a radius of about 1km that they are separated only by wire fence or shrub harrier and flies, rodents, wild cats and birds could have the chance to move around between those farms. The origin of the outbreak blackleg were uncertain, but the transmission between farms were mainly through the movement of farm personnel, vehicles which were struck the feces or manures from farm and other mechanical factors such as flies, rodents and birds furthermore occurred 4 farms were not vaccinated. In conclusion, a periodic disinfection, vaccination and quarantine prevention are ideal methods of damage reduction by blackleg.