• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.13-22
• /
• 2005

This research aimed to generate two points of daylighting application as follows: 1) providing daylight performance data with a variety of glazing materials for a large window and 2) designing and evaluating an experimental type of differentiated window. For this purpose, we compared the daylight and distribution performance of new defined type of window configuration to the conventional window counterpart with a variety of glazing materials. The comparison was made for a deep, south-facing perimeter zone with large window, without any interior obstruction. The conventional window is the base single homogeneous glass pane, where as the differentiated window uses of two different glazings; an upper daylight glazing with high visible transmission and lower view window with lower transmittal glass. The daylight performance data was translated into a ratio between outdoor illuminance and the interiors. The simulated analysis of the conventional window indicates that the interior light levels have been changed proportionally dependent on the transmittance of the applied glass. The comparison of daylight distribution analysis showed that the differentiated window has lots of photometric advantage by the optical function of upper daylight window. In particular, the contribution of higher daylight window into deep rear space must be stressed for daylighting application.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.322-331
• /
• 2009

This paper proposes an efficient data representation of stereo images using edge-based mesh optimization. Mash-based two dimensional warping for stereo images mainly depends on the performance of a node selection and a disparity estimation of selected nodes. Therefore, the proposed method first of all constructs the feature map which consists of both strong edges and boundary lines of objects for node selection and then generates a grid-based mesh structure using initial nodes. The displacement of each nodal position is iteratively estimated by minimizing the predicted errors between target image and predicted image after two dimensional warping for local area. Generally, iterative two dimensional warping for optimized nodal position required a high time complexity. To overcome this problem, we assume that input stereo images are only horizontal disparity and that optimal nodal position is located on the edge include object boundary lines. Therefore, proposed iterative warping method performs searching process to find optimal nodal position only on edge lines along the horizontal lines. In the experiments, we compare our proposed method with the other mesh-based methods with respect to the quality by using Peak Signal to Noise Ratio (PSNR) according to the number of nodes. Furthermore, computational complexity for an optimal mesh generation is also estimated. Therefore, we have the results that our proposed method provides an efficient stereo image representation not only fast optimal mesh generation but also decreasing of quality deterioration in spite of a small number of nodes through our experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1070-1074
• /
• 2014

According to IEEE 1662(2009), IPS is a power system where all prime movers produce electrical power that is shared among propulsion, mission, and ship service loads. Discriminating attributes of integrated power systems are flexibility of movers' arrangements, mechanical decoupling between prime movers and propulsors, an increased level of energy conversion and transmission redundancy, and flexibility of redistributing available electrical power for future electronic weapons. IPS could have various steps of power that can be produced at optimal load of movers. In this study, an evaluation method for optimal arrangement of movers was investigated when an IPS warship is projected. The two factors are utilized for the quantitative analysis which are the weight of system as the fighting power and the fuel consumption per year as the economic feasibility. And also the ways for arrangement of system were studied according to existence of small diesel generator. The evaluation method that decides the optimization level is based on the DEA(Data Envelopment Analysis)

• Journal of The Korean Association For Science Education
• /
• v.33 no.4
• /
• pp.807-825
• /
• 2013

This study investigated two science teachers' practical knowledge shaped during their science classes which intend to realize social construction of scientific models. The teachers' practical knowledge was qualitatively examined in terms of five content categories defined by Elbaz through the reflection-in-action based on video data of their teaching as well as the reflection-on-action based on their narratives and interview data obtained after their classes. The results shows: 1) two science teachers implemented their practical knowledge on appropriate subject matter knowledge when they provided students with scaffoldings to support building scientific models during the classes. 2) The teachers' knowledge about science curriculum played important roles to change the purposes of the classes from the transmission of difficult science concepts to the construction of scientific model appropriate to learning goals. 3) The teachers' implementation of pedagogical knowledge changed toward supporting students' group activities and model generations aligned to the intention of social construction of scientific models. 4) The teachers' practical knowledge about their 'selves' showed that a teacher's perception and implementation of his/her roles of helper, guide, or facilitator are important for students to construct scientific models through group activities. 5) The two teachers' practical knowledge the milieu of schooling is realized by their modes of interactions with student groups during their classes. Two teachers acted like a co-player with his students or like a coach to students near a playground. We discussed domain-specific characteristics about scientific model construction.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.15-19
• /
• 2010

Recently, the wireless LAN system is rapidly growing because of its convenience of high speed communication. However, the wireless LAN systems at indoor places occur multi-propagation path by reflected waves from walls, ceilings, floors, and desks. Multipath problems cause transmission errors and degradation of communication speed. These problems can be solved by using EM wave absorbers. In this paper, we analyzed property of Graphite and derived the optimum ratio of Graphite: CPE to develop EM wave absorber for the wireless LAN system. First, we fabricated several samples in different composition ratios of Graphite and CPE, and then measured the reflection coefficient of each samples. Material constants of permittivity and permeability were calculated using the measured data and designed EM wave absorber. Secondly, the EM wave absorber was fabricated and tested on the base of the simulation data. As a result, it showed that the EM wave absorber in 1.7 mm thickness with the ratio of Graphite: CPE=50:50 wt.% has excellent absorption ability more than 27 dB at 5.2 GHz.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.63-71
• /
• 2020

In this paper, we propose a fire detection technology using YOLOv3 and EfficientDet, the most reliable artificial intelligence detection algorithm recently, an alert service that simultaneously transmits four kinds of notifications: text, web, app and e-mail, and an AWS system that links fire detection and notification service. There are two types of our highly accurate fire detection algorithms; the fire detection model based on YOLOv3, which operates locally, used more than 2000 fire data and learned through data augmentation, and the EfficientDet, which operates in the cloud, has conducted transfer learning on the pretrained model. Four types of notification services were established using AWS service and FCM service; in the case of the web, app, and mail, notifications were received immediately after notification transmission, and in the case of the text messaging system through the base station, the delay time was fast enough within one second. We proved the accuracy of our fire detection technology through fire detection experiments using the fire video, and we also measured the time of fire detection and notification service to check detecting time and notification time. Our AI fire detection and notification service system in this paper is expected to be more accurate and faster than past fire detection systems, which will greatly help secure golden time in the event of fire accidents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.65-73
• /
• 2021

This study aimed to provide the basic data for the development of a simulation training program for new infectious diseases by analyzing the knowledge and educational needs of 119 paramedics regarding COVID-19 infection control. Data was obtained through a structured questionnaire survey of 186 paramedics from November 15th to 30th 2020. The study showed that 98 of the 119 paramedic subjects (52.7%) had not been educated regarding COVID-19. The knowledge level was 18.21±1.98 out of 25 points, with environmental control securing the lowest correct answers. The highest need for education was in the areas of prevention of transmission and spread, and employee safety control. The total average for educational needs was 3.81±.28 (4 point scale) with the highest educational need in the area of prevention of the spread and dispersion of the disease and employee safety management. There was a statistically significant difference in the knowledge of the general characteristics according to gender (t=-1.999, p=.047) and the educational demand was related to career (t=-1.999, p=.047) and, education levels (t=2.336, p=.021). Accordingly, it is necessary to plan a new infectious disease simulation education program that addresses the low-scoring areas and items with high educational needs which include the propagation path and spread prevention, environmental management, and employee safety management as per the findings of this study.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.573-586
• /
• 2016

With the adoption of cloud computing, the number of companies that take advantage of cloud computing has increased. Additionally, various of existing service providers have moved their service onto the cloud and provided user with various cloud-based service. The management of user authentication and authorization in cloud-based service technology has become an important issue. This paper introduce a new technique for providing authentication and authorization with other inter-cloud IAM (Identity and Access Management). It is an essential and easy method for data sharing and communication between other cloud users. The proposed system uses the credentials of a user that has already joined an organization who would like to use other cloud services. When users of a cloud provider try to obtain access to the data of another cloud provider, part of credentials from IAM server will be forwarded to the cloud provider. Before the transaction, Access Agreement must be set for granting access to the resource of other Organization. a user can access the resource of other organization based on the control access configuration of the system. Using the above method, we could provide an effective and secure authentication system on the cloud.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.2
• /
• pp.283-294
• /
• 1996

To operate the automatic devices of manufacturing process more effectively and to solve the needs of the resource sharing, network technology is applied to the unit control devices located in common manufacturing zone and operated by connecting them. This paper introduces deign and test operation of cell system for the management of multivendor PLC by applying to wall paper process based on the manufacturing standardization of CIM. The analysis of designed multivendor PLC group is performed by selecting the parameters such as variation of data packet size and node number of PLC ladder logic program and variation by analyzing the corresponding variation values of token rotation time and waiting time for the system operation. For the method of the analysis,the equation is considering the overhead such as indicated packet service time and transmission safety margin for PLC network connection in M/G/1 queue model,and it is applied to the cell system and PLC group manage-ment for operation .Through the experiment,it is found that the realtime processing is possible with expanded and better result than the resuit obtained by Jayasumana.Browaka with PLC scan time considered,response lower limit of 10-20 msec. data packet size not more than 50 bytes.and the number of nodes less than 40.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.73-84
• /
• 2003

Due to the problems of existing prepaid plastic card issued by Korea Highway Company, the prepaid electronic payment system using a smart card, called HipassPLUS Card, was developed to overcome the Problems. PSAM is one of the main component of the systea which can retrieve the value from HipassPLUS card, transmit the transaction data to CSAM, and store the accumulated account lists. For the safety of the elecoonic payment system, the functions of PSAM should be faultless. This paper developed a test module including the test method, the test checklist, and the test procedure. The test module examines the functionality and security of the payment mechanism to insure that the value stored in HipassPLUS card can be raid to PSAM by the merchants and the standardized SAM. The test module also inspects the transmission mechanism to send and store the transaction data kom PShM to CSAM correctly and safely. Ihe module is designed to test the standard items using the test checklists for PSAM. The test items and the test checklists of PShM was selected under the provision of the specification of Korea Highway Company and ISO standard. Ihe evaluation on PSAM using the test module indicates that PSAM satisfies the evaluation criteria on the quality characteristics of the functionality, security, and compatibility.