• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.887-894
• /
• 2007

본 논문에서는 전기 결합 구조와 추가된 개방 스터브를 이용해 제이 가능한 4개의 전송 영점을 갖는 저역 통과 필터를 설계 및 제작하였다. 필터의 통과 대역은 GSM 대역이며, 전기 결합에 의해 WiBro 및 위성 DMB 대역에서 전송 영점이 각각 발생한다. 또한, 임의의 상측 주파수에서 개방 스터브에 의해 추가적인 2개의 전송 영점이 발생하는 구조이다. 적은 기생 성분을 갖는 준집중 소자를 이용해 필터를 구현함으로써 차단 대역의 고조파 성분을 억제하였다. 유한 전송 영점의 제어를 위한 등가 회로의 전기 결합 성분인 $C_M$은 필터 구조의 개방 스터브 간 간격 조절을 통해 구현하였다. 유전율 2.6인 테프론 기판을 사용하여 제작된 필터의 전체 크기는 급전선로를 포함하여 $38{\times}20{\times}0.79mm^3$이다. 측정된 3dB 차단 주파수는 1.55GHz이며, 전송 영점의 위치는 각각 2.20, 2.43, 4.11 및 6.84 GHz이다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1264-1271
• /
• 1999

In this paper, an efficient method of analysis and design of fault detection filter is presented. Since the directional constraint is applied to the eigenstructure associated with the detection space, an eigenvector is determined by the eigenvalues associated with other eigenvectors. Further, the assignment of a pair of eigenvalue and eigenvector leads to the fixation of overall eigenstructure related with the detection space. Using the transmission zeros and the transmission zero vectors, these phenomenon are clearly proven, and an efficient algorithm for design of the fault detection filters is presented.

• Journal of electromagnetic engineering and science
• /
• 제12권3호
• /
• pp.210-215
• /
• 2012

This paper presents a compact microstrip triple-mode filter with enhanced skirt characteristics. The presented triple-mode filter configuration supports three transmission poles and three transmission zeros within the nearby passband. Two of transmission zeros are generated by a triple-mode resonator itself, and the third one is generated by small cross-couplings between the I/O ports. Each resonance condition and the transmission zero generation conditions are analyzed using an equivalent circuit. The bandpass filter is designed for a 2.4 GHz WLAN. The filter was fabricated with a relative dielectic constant of 3.5 and a thickness of 0.76 mm. The fabricated filter has a small size ($7.9mm{\times}7.2mm$, i.e., $0.107{\lambda}_g{\times}0.098{\lambda}_g$, where ${\lambda}_g$ is guided wavelength at a center frequency) and shows high performing skirt characteristics.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.582-588
• /
• 2012

In this paper, a highly miniaturized and performed UWB bandpass filter has been newly designed and implemented by embedding all the passive elements into a multi-layered PCB substrate with high dielectric $SrTiO_3$ composite film for 3.1 - 4.75 GHz compact UWB system applications. The high dielectric composite film was utilized to increase the capacitance densities and quality factors of capacitors embedded into the PCB. In order to reduce the size of the filter and avoid parasitic EM coupling between the embedded filter circuit elements, it was designed by using a $3^{rd}$ order Chebyshev circuit topology and a capacitive coupled transformation technology. Independent transmission zeros were also applied for improving the attenuation of the filter at the desired stopbands. The measured insertion and return losses in the passband were better than 1.68 and 12 dB, with a minimum value of 0.78 dB. The transmission zeros of the measured response were occurred at 2.2 and 5.15 GHz resulting in excellent suppressions of 31 and 20 dB at WLAN bands of 2.4 and 5.15 GHz, respectively. The size of the fabricated bandpass filter was $2.9{\times}2.8{\times}0.55(H)mm^3$.

• ETRI Journal
• /
• 제41권1호
• /
• pp.117-123
• /
• 2019

This paper presents a tri-wideband bandpass filter (TWB-BPF) with compact size, high band-to-band isolation, and multiple transmission zeros (TZs). The proposed TWB-BPF is based on a multiple-mode resonator (MMR), which is interpreted by the method of the even- and odd-mode analysis technique. The MMR can excite 11 resonant modes, where the first two modes comprise the first passband, the next four modes form the second passband, and the last five modes are used to generate the third passband. In addition, 10 TZs are yielded to obtain high band-to-band isolation and wide stopband suppression characteristics up to $14.95f_{c1}$ ($f_{c1}$ is the center frequency of the first passband). To verify the proposed filter, a TWB-BPF with 3-dB fractional bandwidths (FBWs) of 37.4%, 43.5%, and 40.4% is designed, fabricated, and measured.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.174-179
• /
• 2013

이 논문에서는 multiple split ring resonator(MSRRs)와 로딩된 스위치드 제어부를 이용하여 2개의 전송영점을 가지는 대역통과 여파기를 설계하였다. 높은 선택도와 칩 사이즈의 초소형화를 위해 비대칭의 급전 선로를 도입하여 통과 대역 주위에 위치한 전송 영점 쌍을 생성하였다. Cross coupling 또는 source-load coupling 방식을 이용한 기존의 여파기와 비교해보면 이 논문에서 제안된 여파기는 단지 2개의 공진기만으로 전송 영점을 생성하여 높은 선택도를 얻었다. 여파기의 선택도와 민감도(삽입 손실)를 최적화하기 위해 비대칭 급전 선로의 위치에 따른 전송 영점과 삽입손실의 관계를 분석하였다. 통과 대역 주파수의 가변과 30dBm 정도의 고 출력 신호를 처리하기 위해 MSRRs의 최 외각 링에 MIM 커패시터와 stacked-FET으로 구성된 SOI-CMOS 스위치드 제어부가 로딩되어 있다. 스위칭 트랜지스터의 전원을 켜고 끔으로써 통과 대역 주파수를 4GHz로부터 5GHz까지 이동시킬 수 있다. 제안된 칩 여파기는 0.18-${\mu}m$ SOI CMOS 기술을 이용함으로써 높은 Q를 가지는 수동 소자와 stacked-FET의 집적을 가능하게 만들었다. 설계된 여파기는 $4mm{\times}2mm$ ($0.177{\lambda}g{\times}0.088{\lambda}g$)의 초소형화 된 크기를 가진다. 여기서 ${\lambda}g$는 중심 주파수에서의 $50{\Omega}$ 마이크로스트립 선로의 관내 파장을 나타낸다. 측정된 삽입손실(S21)은 5.4GHz, 4.5GHz에서 각 각 5.1dB, 6.9dB를 나타내었다. 설계된 여파기는 중심 주파수로부터 500MHz의 오프셋에서 20dB이상의 대역외 저지 특성을 나타내었다.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.247-251
• /
• 2017

This paper proposes a low power transmission technique for single-carrier modulation with frequency domain equalization. As time domain signals and frequency domain signals have unique corresponding functions, inserting zeros after each symbol causes a repetition in other domain, so maximal ratio combining technique using repetitive transmission can be applied in the frequency domain. In this paper, we configure transmit signals to insert zeros after each symbols for single-carrier modulation with frequency domain equalization and maximal ratio receive combining block in the receiver structures, propose a structure for transmitter and receiver and show that its performance is better than the traditional algorithm by simulations.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.263-266
• /
• 2013

A novel compact and low-loss VHF bandpass filter is presented with enhanced stopband performance using metamaterial zeroth order resonator (ZOR) characteristics. An in-line ZOR filter is initially suggested and changed to have transmission zeros (TZs) due to source-load coupling for effective improvement of the isolation from UHF wireless channels. The proposed filter is smaller than 1/10 of the conventional filters in terms of size and has relatively very low insertion loss (< 1 dB for the electromagnetic (EM) simulation and < 3 dB for the measurement) and return loss (<-20 dB) in the passband due to the approximately 80% size reduction and the higher isolation in the stopband due to the TZs. The circuit and EM simulation are in good agreement with the measurements.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.13-18
• /
• 2016

This paper presents a design of an impedance transformer (IT) with high frequency selectivity characteristics. The frequency selectivity can be controlled by even- and odd-mode impedance of a shunt coupled transmission line (TL). For experimental validation, a 50- to $20-{\Omega}$ IT was implemented at a center frequency ($f_0$) of 2.6 GHz for the long-term evolution signal. The measured results were in good agreement with the simulations, showing a return loss higher than 19 dB over a passband bandwidth of 0.63 GHz (2.28-2.91 GHz) and good sharp frequency selectivity characteristic near to the passband. The series coupled TL provides a transmission zero at 5.75 GHz, whereas the shunt coupled TL provides three transmission zeros located at 2 GHz, 3.1 GHz, and 7.14 GHz.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.17-22
• /
• 2005

This paper presents a improvement equivalent circuit model for Miniaturized LTCC bandpass filter with two transmission zeros using feed-back capacitor. The bandpass filter equivalent circuit is evaluated by parallel network analysis. Besides, the filter is modeled by proposed passive element modeling algorithm in previous work. Compared to the equivalent circuit of established paper that is configured by excepted capacitance between ground plate and signal plate, this model can include that. The result, the LTCC bandpass filter reduce layers and the size is more smaller.