• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.913-915
• /
• 1996

This paper proposes the proper phase arrangement of transmission lines for reducing the zero sequence circulating current. It is a well-known fact that the zero sequence circulating currents are principally caused by the untranposed lines and numerical estimation method already has been established. In this paper, the circuit analysis for calculating the zero sequence circulating currents was performed on the existing 154kV four-circuit systems of KEPCO and the proper phase arrangement was determined.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.39-43
• /
• 2022

In this paper, a study was conducted on encapsulation technology for high mechanical stability of flexible displays. First, unlike conventional encapsulation barrier that exclude cracks as much as possible for low water vapor transmission rate (WVTR), mechanical properties were improved by using a defect suppression mechanism introduced with crack arresters. The zero-stress encapsulation barrier optimizes the residual stress of the thin film based to improve the internal mechanical stability. The zero-stress encapsulation barrier was applied to the organic light emitting diodes (OLEDs) to confirm its characteristics and lifetime. Due to improved internal mechanical stability, it has a longer lifetime more than 35% compared to conventional encapsulation technologies. As the zero-stress encapsulation barrier proposed in this study does not require additional deposition process, it is not difficult to apply it. Based on various advantages, it is expected to play an important role in flexible displays.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.282-284
• /
• 1999

This paper presents an accurate algorithm for fault location of a single phase to earth fault on a two-parallel transmission line using only one-terminal data. It is impossible to calculate the accurate fault distance, because of the unknown fault resistance and fault current at the fault point. The faulted line circuit and the zero-sequence circuit of two-parallel line are used as a fault location model, which the source impedance of the remote end is not involved. The algorithm can eliminate the effect of load flow and the fault resistance in calculating the fault location.

• International Journal of Internet, Broadcasting and Communication
• /
• 제6권1호
• /
• pp.9-12
• /
• 2014

We present a mathematical method for calculation of transmission zero locations, determining a filtering characteristics of two-port systems. By adjusting element values based on the zero locations, the frequency-selectivity is characterized. The characteristic polynomial of ladder networks in externally-loaded feed-forward systems is considered by adopting chain matrices for subsystems. This method can be extended to other types of lumped systems with cross-coupled sections. We find out the zeros by solving characteristics polynomials of closed-form expressions in terms of Laplace impedances of elements. The pairs of complex zeros are shown to be solely from the cross-coupled portion of the system.

• ETRI Journal
• /
• 제37권5호
• /
• pp.898-905
• /
• 2015

In this paper, we consider a joint beamforming and jamming design to enhance physical layer security against potential multiple eavesdroppers in a multiple-input and single-output cellular broadcast channel. With perfect channel state information at the base station, we propose various design approaches to improve the secrecy of the target user. Among the proposed approaches, the combined beamforming of maximum ratio transmission and zero-forcing transmission with a combination of maximum ratio jamming and zero-forcing jamming (MRT + ZFT with MRJ + ZFJ) shows the best security performance because it utilizes the full transmit antenna dimensions for beamforming and jamming with an efficient power allocation. The simulation results show that the secrecy rate of this particular proposed approach is better than the rates of the considered conventional approaches with quality-of-service and outage probability constraints.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.199-201
• /
• 2003

Because of Korean power system characteristics and increasing power demand, the need of 765kV transmission line is growing gradually. Now a days, KEPCO's 765kV transmission line has been tested and stands for commercial operation. During the first stage, 765kV transmission line will be operated with two voltage grades of 765kV and 345kV, which results the unbalance of power system. So unbalanced current such as zero sequence current flows in the transmission line. In this paper, we describes the simulation study of 765/345kV parallel transmission line by using EMTDC program.

• 한국광학회지
• /
• 제11권2호
• /
• pp.135-138
• /
• 2000

• 대한전자공학회논문지SD
• /
• 제41권9호
• /
• pp.57-64
• /
• 2004

본 논문에서는 비동기식 회로 설계시 2선식(Dual-Rail) 코드를 사용할 때, 회로 구조에서 갖는 신호 천이를 줄여 소비전력을 감소시키는 RZ/NRZ 혼합 데이터 전송 방식을 제안한다. RZ 방식 2선식 코드는 비동기 회로 구현에 많이 사용되고 있으며, 고정 지연을 사용하는 단선구조와는 달리 데이터를 통하여 신호의 유효성을 판별할 수 있다 그러나, 단선 구조에 비해 많은 회로 면적과 모든 신호가 Return-to-Zero의 스위칭에 의해 전력 소비를 가져오므로, 신호 천이의 수를 감소시킬 필요가 있다. 본 논문에서는 RZ/NRZ 방식을 제안하여 스위칭을 약 50% 감소시키며 소비전력을 비교한 결과, 기존의 2선식에 비해 약 23% 정도 감소하는 결과를 얻었다.

• 한국인터넷방송통신학회논문지
• /
• 제15권5호
• /
• pp.119-123
• /
• 2015

본 논문은 마크-젠더 변조기를 사용하여 광 신호를 생성하는 광 NRZ(nonreturn-to-zero) 송신기의 전송 특성을 이론적으로 분석하였다. 특히 단일 모드 광섬유를 통하여 분산 보상 방법 없이 1550nm 파장에서 25Gbps 광 NRZ 신호를 전송하고 그 성능을 chirp을 나타내는 ${\alpha}$-계수와 마크-젠더 변조기의 구동 전압비(=구동 전압/스위칭 전압)의 영향을 고려하여 평가하였다. 분산을 개선하기 위하여 음의 값을 가진 ${\alpha}$-계수를 사용하고 그 값들과 함께 구동 전압비의 크기를 적절히 조정하여 최적화된 상태에서 성능 개선을 시험하였다. 개선된 전송 성능은 비트 오류율(Bit Error Rate)과 광 아이 다이어그램으로 확인되었다.

• 한국전자파학회논문지
• /
• 제22권3호
• /
• pp.320-326
• /
• 2011

공진되는 개구와 비공진 개구로 구성되는 두 가지 형태의 FSS 구조에 대해 전부 투과되는 응답을 비교 연구하였다. 입사파가 전부 투과할 때 공진 개구의 FSS 구조는 파장 ${\lambda}$ 대 배열 주기 T의 비에 대해 비공진 개구의 FSS인 경우보다 더 큰 비를 가짐을 알 수 있었고, 또한 동작 주파수는 공진 구조를 이용함에 의해 상당히 낮출 수 있다. 이러한 물리적 상황은 현재 물리학 분야에서 널리 연구되고 있는 공진형의 특이한 광투과 현상과 유사한 성질을 지닌다고 사료된다.