• 한국해양공학회지
• /
• 제21권6호
• /
• pp.47-52
• /
• 2007

This paper presents the design of a submerged breakwater, which functions as an eco-structure in a marine environment. Newly patented blocks were used in the submerged breakwater to both make it stable and provide an inhabitable space for fish. To investigate the wave transmission of the proposed submerged breakwater, parametric studies were conducted through two-dimensional hydraulic tests, which were carried out at the National Fisheries Research and Development Institute (NFRDI) in South Korea. Those parameters are relative crest width (B/L), wave steepness (H/L), relative crest depth (hB/H), and submerged breakwater configuration. The hydraulic experimental results can be used to predict the performance of the proposed submerged breakwater covered with the multi-function blocks.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권2호
• /
• pp.11-15
• /
• 2002

High speed probe for measurement of sin91e flux quantum circuits is comprised of coaxial cables and microstrip lines in order to carry high speed signals without loss. For the impedance matching between coaxial cable and microstrip line, we have determined the dimension of the microstrip line with 50${\Omega}$ impedance by simulation and then have investigated the effect of line width and cross-sectional shape of signal line, dielectric material, thickness of soldering lead at the coaxial-to-microstrip transition Point, and the an91c between dielectric material and end part of the signal line on the characteristics of signal transmission of the microstrip line. From the simulation, we have found that these all parameter's had influenced on the characteristic of signal transmission on the microstrip line and should be reflected in fabricating high speed probe, We have also determined the dimension of coplanar waveguide to fabricate testing sample for performance test of high speed probe.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.853-858
• /
• 2010

본 논문은 알루미늄의 양극산화를 통하여 알루미나(Alumina, $Al_2O_3$)를 형성함으로써 알루미나 및 알루미늄의 적층 구조 DRAM 패키지 기판을 구현하였다. 전송선 기반의 설계를 적용하기 위해 2차원 전자장 시뮬레이션을 수행하였다. 분석 결과를 바탕으로 새로운 기판에 적용할 신호선의 폭 및 간격과 알루미나 두께 등의 설계인자를 최적화하였다. 테스트 패턴 제작 및 측정을 통해 설계인자를 검증하였으며, 이를 바탕으로 설계 룰(Design rule)을 정하고 패키지의 개념 설계 및 상세 설계를 진행하여 DDR2 DRAM 패키지 기판을 성공적으로 제작하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.415-419
• /
• 1999

Many bipolar logic circuit of conventional occurred problem of speed delay according to deep saturation state of vertical NPN Transistor. In order to remove minority carries of the base region at changing signal in conventional bipolar logic circuit, we made transistor which is composed of NPN transistor shortened buried layer under the Base region, PNP transistor which is merged in base, epi layer and substrate. Also the Ring-Oscillator for measuring transmission time-delay per gate was designed as well. The structure of Gate consists of the vertical NPN Transistor, substrate and Merged PNP Transistor. In the result, we fount that tarriers which are coming into intrinsic Base from Emitter and the portion of edge are relatively a lot, so those make Base currents a lot and Gain is low with a few of collector currents because of cutting the buried layer of collector of conventional junction area. Merged PNP Transistor's currents are low because Base width is wide and the difference of Emitter's density and Base's density is small. we get amplitude of logic voltage of 200mv, the minimum of transmission delay-time of 211nS, and the minimum of transmission delay-time per gate of 7.26nS in AC characteristic output of Ring-Oscillator connected Gate.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.629-635
• /
• 2014

This paper describes propagation characteristics obtained by considering semiconducting screen and cross-bonding in underground transmission cables. The semiconducting screen of power cable has effect on propagation characteristics including attenuation, velocity and surge impedance. However, it is very difficult to apply the semiconduction screen for EMTP model because of the number of conductors limitation. Therefore, CIGRE WG 21-05 proposed advanced insulation structure and analysis technique of simplified approach including inner and outer semiconducting screen. In this paper, the various propagation characteristics analyse using this structure and technique for 154kV XLPE $2000mm^2$ cable. The frequency independent model of EMTP CABLE PARAMETER is used for just pattern analysis of propagation characteristics. For exact data analysis, the frequency dependent model of J-marti is used for EMTP modeling. From these result, various propagation characteristics of 154kV XLPE $2000mm^2$ cable according to semi conducting screen consideration, frequency range, cable length and pulse width are analysed. In addition, in this paper, the effects of cross-bonding are also variously discussed according to cross-bonding methods, direct connection and impedance of lead cable.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.994-1005
• /
• 2015

This paper presents a novel power control strategy for PWM current-source rectifiers (CSRs) in the stationary frame based on the instantaneous power theory. In the proposed control strategy, a virtual resistance based on the capacitor voltage feedback is used to realize the active damping. In addition, the proportional resonant (PR) controller under the two-phase stationary coordinate is designed to track the ac reference current and to avoid the strong coupling brought about by the coordinate transformation. The limitations on improving steady-state performance of the PR controller is investigated and mitigated using a cascaded lead-lag compensator. In the z-domain, a straightforward procedure is developed to analyze and design the control-loop with the help of MATLAB/SISO software tools. In addition, robustness against parameter variations is analyzed. Finally, simulation and experimental results verify the proposed control scheme and design method.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.939-948
• /
• 1997

본 논문에서는 ATM 네트워크에서의 접속된 ABR 서비스에 대해 공정한 대역폭을 할당하는 새로운 비율 기반 전송률 제어 알고려즘을 제안한다. 기존 ABR 서비스에서는 일정률로 전송률을 증가, 감소를 하면서 대역폭을 할당하나 제안된 알고리즘에서는 이용 가능한 대역폭을 퍼지 추론을 하여 접속된 호에 대해 전송률을 공평하게 분할하는 기법이다. 퍼지 추론은 입력 변수로 버퍼 상태, 버퍼 변화율을 사용하고 출력 변수로 전체 전송률을 사용한다. 이 추론된 결과값은 동작 중에 있는 ABR 서비스 호에 공평하게 분배되어 진다. 모의 실험 결과 기존의 E EPRCA 방식보다 제안된 방식이 링크 효율면에서 RIF, RDF가 1일 경우 0.17%, 1/4 경우 6%, 1/16 경우 38.6%, 1/32 경우 82.4%의 향상을 보였다.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권2호
• /
• pp.63-66
• /
• 2018

Lattice towers and tubular steel poles have been commonly used for electrical power transmission in Korea as well as the other countries. They are durable, structurally stable, simple and can easily be constructed in limited spaces. However, residents are opposed to construct transmission lattice towers in their areas because they are not visually attractive, and electrical field occur at the transmission lines. Underground transmissions have been used instead of the traditional towers to resolve these problems, however they are not cost effective to construct and run. Therefore, we have developed compact towers that are more attractive, well blend into the surrounding environment and much more economical than underground transmissions. This paper shows the design of a compact towers with insulation arm, in order to reduce the height of tower and the separation between phases. The compact tower can be installed in a narrow right-of-way. Insulation arms are easily applied to lattice and steel tubular towers instead of steel arms. Compact towers with insulation arm are also considered as a solution to have public acceptance or to create a familiar atmosphere among towers and people. Compact tower compared with a conventional tower, insulation arms reduces the width and height of the tower by 20% and 15% respectively.

• Applied Microscopy
• /
• 제28권1호
• /
• pp.49-62
• /
• 1998

To investigate the morphological changes of epithelial cells of ductus epididymides by sperm entrance, the Korean striped field mouse, Apodemus agrarius coreae was studied with light and transmission electron microscopy. 1. The diameters of the caput epididymis (Cp) and its lumen were $135\sim145{\mu}(140{\pm}0.5{\mu})$ and $115\sim120{\mu}m(117{\pm}0.1{\mu}m)$. The length and width of the epithelium were $27.0\sim28.5{\mu}m(28.0{\pm}0.1{\mu}m)$ and $4.8\sim5.4{\mu}m(5.1{\pm}0.2{\mu}m)$. 2. The diameters of the corpus epididymis (Cr) and its lumen were $160\sim170{\mu}m(166{\pm}0.2{\mu}m)$ and $140\sim150{\mu}m(145{\pm}0.3{\mu}m)$. The length and width of the epithelium were $17.4\sim18.0{\mu}m(17.6{\pm}0.5{\mu}m)$ and $8.8\sim10.4{\mu}m(9.5{\pm}0.2{\mu}m)$. 3. The diameters of the cauda epididymis (Cu) and its lumen were $270\sim280{\mu}m(275{\pm}0.2{\mu}m)$ and $265\sim275{\mu}m(268{\pm}0.3{\mu}m)$. The length and width of the epithelium were $11.2\sim13.4{\mu}m(12.3{\pm}0.3{\mu}m)$ and $9.2\sim11.2{\mu}m(10.0{\pm}0.2{\mu}m)$. Therefore, the size of diameter and lumen of the ductus epididymides and the width of the epithelium increased from Cp and Cr to Cu, but the length of epithelial cells decreased from Ca and Cr to Cu. These data suggest that the morphological changes of epithelial cells of the ductus epididymides may be the results of the sperm entrance.

• 마이크로전자및패키징학회지
• /
• 제29권2호
• /
• pp.99-105
• /
• 2022

칩사이즈가 작아짐에 따라 선폭 또한 미세화되면서 인터커넥션의 밀집정도가 증가하고 있다. 그로 인해 캐패시터 층과 전기전도층의 저항 차이로 인해 RC delay가 문제되고 있다. 이를 해결하기 위해서는 높은 전기전도도의 전극과 낮은 유전율의 유전체 개발이 요구된다. 본 연구에서는 PCB (Print Circuit Board)의 회로를 외부요인으로부터 보호하는 상용 PSR (photo solder resist)과 우수한 내열 및 저유전 특성을 보유한 PI (polyimide)를 혼합하여 저유전체 잉크 개발을 진행하였다. 그 결과 PSR과 PI를 10:3으로 혼합한 잉크가 가장 우수한 결과를 보였으며 20 GHz와 28 GHz에서 각각 유전 상수 약 2.6, 2.37을 보였고, 유전손실은 약 0.022, 0.016으로 측정되었다. 차후 어플리케이션 적용 가능성 검증을 위해 테프론에 제작된 다양한 선폭의 전송선로에 평가하였으며 그 결과, PSR만 사용했을 때보다 PI와 혼합한 저유전체 잉크를 사용한 전송선로의 손실이 S21에서 평균 0.12 dB 덜 감소한 결과를 보였다.