• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.39-43
• /
• 1989

In this paper, the concept of ultrasonic transmission imaging system with crossed -arrays is Introduced. The crossed-array system is simulated by angular spectrum method In the operating frequency of 12MHz. A theoritical development of a system transfer function matrix 1M is presented. Using this matrix, a priori knowledge on the physical properties of the system is understood. It proves to be a block Toeplitz matrix with Toeplitz entries. Using the Inversion procedure, the spatial degradations of the measured image can be removed.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1346-1348
• /
• 2001

Generally, Invar alloy shows very low thermal expansion characteristics, lower than $2{\times}10^{-6}$/K approximately. To apply Fe-Ni-Co-C Invar alloy as a core material for large ampacity transmission line we studied the effects of magnetic properties on coefficient of thermal expansion. The coefficient of thermal expansion(CTE) suddenly decreases with addition of a little carbon(0.08%), increases with the increasing carbon and has a constant value at the composition over than 1.0%C. The trend of Curie temperature change with carbon is similar with that of CTE. Therefore, the CTE has a linear relationship with Curie temperature. However, the CTE linearly decreases with the ratio of saturation magnetization and Curie temperature(${\sigma}_s/T_c$).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1429-1436
• /
• 2000

Suction muffler is one of the important component of a compressor for low noise level and high efficiency. The suction muffler which has the complicated flow path gives the higher transmission loss of sound, but lower efficiency of compressor results from the superheating effect and flow loss in suction flow path. It is shown that the computational analysis of fluid dynamics are very popular methods for designing of high performance and low noise suction muffler. To reduce the thermodynamic and flow loss in suction process, the flow path of suction muffler was estimated by FVM(Finite Volume Method) and verified by experiments. And to enlarge the transmission loss of sound, the acoustic properties inside the suction muffler was analyzed by FEM(Finite Element Method) and experiments. The smart muffler which gives a good efficiency and low noise character was developed by using those methods, and the effect was evaluated in compressor by experiment.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.1
• /
• pp.115-127
• /
• 1997

A GDHS(Geothermal District Heating System) is a heating system supplying a group of districts with heat extracted from geothermal sources. The advantages of GDHS include saving fuel consumption as well as reducing air pollution. This paper presents a case study for the economic feasibility model and analysis of a GDHS with which central/individual heating systems are replaced. Configuring to a simplified GDHS which consisits of subsurface systems, surface systems, and transmission/distribution systems, we find out the properties of the system and the model parameters affecting the initial investment/operating costs in order to develop a classical economic feasibility model given geothermal temperature. Based on our model parameter space, we analyzed the geothermal development project of the Jejoo Island probabilistically given prior information such as the expected geothermal power, the demand size and the length of transmission/distribution pipes.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.672-677
• /
• 2000

This paper compares the two kinds of friction model. The first model is classical stick/slip model. In the stick/slip model, the system is treated to have two different states, namely, stick state or slip state. The second one is continuous model developed by Dahl et. al, namely, Extended Dahl's model. Each model has unique properties, and can be best useful when it is applied on the appropriate system. In this paper, each model is applied on the simple two-block system and the complex automatic transmission system. And the simulation result including simulation accuracy and time required are compared.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.447-451
• /
• 1998

This paper conducts a study on a non-contact power delivering system using high-frequency inverter with the purpose of discussing the non-contact electric power transmission characteristics through circuit analysis, magnetic analysis and feasible experiments. In this power delivering scheme, various properties pertaining to the non-contact transformer of the power system such as the design, the core depth, core material, primary side frequency etc. are considered with a view of improving the non-contact power dilivery to the secondary.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.282-287
• /
• 2004

Since the manufacturing process in the LTCC process does not allow solid ground planes between ceramic layers to isolate the signal lines, the buried ground should be realized as a meshed ground plane. Both characteristic impedances of the signal lines and couplings between different signal layers are influenced by the properties of these meshed planes. In this paper, we propose a new analysis method for coupling behavior between internal transmission lines, which are isolated by the buried meshed-ground planes. The coupling behavior between layers isolated by meshed-ground planes is investigated by the coupled-transmission line model for the isolated layers. The coupling factors between isolated lines with the meshed-ground are extracted by 2-D FEM calculations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.687-694
• /
• 1997

The anisotropy and shape of distributed piezopolymer actuator have advantages over isotropic piezo ceramic materials, since these features of PVDF can be utilized as another design variable in control application. This study is interested in the reduction of sound transmission through elastic plate into interior space by using the PVDF actuator. The plate-cavity system is adopted as a test problem. The vibration of composite plate and the sound fields through plate are analyzed by using the coupled finite element and boundary element method. Some numerical simulations are performed on sound transmission through elastic plates. To investigate the effects of anisotropy and shape of distributed piezopolymer actuator, various kinds of distributed PVDF actuators are applied in sound control simulation for isotropic and anisotropic plates. The PVDF actuators applied are different from each other in their shapes and laminate angles. The results of control simulation show that the control effectiveness of distributed PYDF actuator can be enhanced by using the coupling between shape of actuator and vibration modes of structure and the anisotropy of piezoelectric properties of PVDF.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.4
• /
• pp.231-238
• /
• 1997

Tantalum oxide thin filme has an amorphous structure and a high resistivity. Its stoichiometric structure was $Ta_2O_{5.3}$ and the transmission ratio was 80%. The high resistivity of $Ta_2O_{5.3}$ thin film electrolyte made an EC windows without electrical shottness, but the bleached/colored cur rent was very low because of the low ion conductivith. Upon adding moisture into the system, the $\Delta$T increased upto 25 %. proton concentration increase was the main cases to improve optical property. The influence of adding precious or transition metal film(~100 $\AA$ thickness) in $Ta_2O_5$layer on the color change performance was observed. The metal insertion layers had formed hydroxide and they behaved as a stable proton source. The transmission diffrnece and cycle life were greatly enhanced in the case of Ti inssertion.The $\Delta$T was 50% and the cycle life was 18, 000.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1983.10a
• /
• pp.68-72
• /
• 1983

The Hadamard matrix is a symmetric matrix made of plus and minus ones as entries. There fore the use of Hadamard transform in the image processing requires only the real number operations and results in the computational advantages. Recently, However, certain degradation aspects have been reported. In this paper we propose a WH matrix which retains the main properties of Hadamard matrix. The actual improvement of the image transmission in the inner part of the picture has been demonstrated by the computer simulated image developments. The orthogonal transform offers a useful facility in the digital signal processing. As the size of the transmission block increases, however, the assigment of bits for each data must increase exponentially. Thus the SNR of the image tends to decline accordingly. As an attempt to increase the SNR, we propose the WH matrix whose elements are made of $\pm$1, $\pm$2, $\pm$3, and the unitform is 8$\times$8 matrix.