• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.93-99
• /
• 2006

Flexible couplers are widely used for exhaust transmitted vibration reduction in vehicles. This paper describes an investigation into the acoustical characteristics of exhaust flexible coupler by the simulation and testing. Computational acoustic simulation is carrying out to investigate resonance frequency and transmission loss of decoupler using the boundary element method and transfer matrix approach. To confirm the acoustical simulation results of exhaust decoupler, we compare with measured experimental results by the test of transmission loss measurement system. In the comparison with simulation results and tests results, there is correctly fit the resonance frequency and the trend of transmission loss. Also, we show that the acoustical structure of decoupler is analogous to the expended tube or side branch resonator. The characteristics of exhaust decoupler have a marked increase in the acoustic attenuation at the specified frequency bend. Therefore the decoupler is applied to develop the exhaust system not only for the vibration isolator but also for the noise attenuator.

• 대한의용생체공학회:의공학회지
• /
• 제35권5호
• /
• pp.142-150
• /
• 2014

The key to model-based iterative reconstruction (MBIR) algorithms for transmission computed tomography lies in the ability to accurately model the data formation process from the emitted photons produced in the transmission source to the measured photons at the detector. Therefore, accurately modeling the system matrix that accounts for the data formation process is a prerequisite for MBIR-based algorithms. In this work we compared quantitative performance of the three representative ray-driven methods for calculating the system matrix; the ray-tracing method (RTM), the distance-driven method (DDM), and the strip-area based method (SAM). We implemented the ordered-subsets separable surrogates (OS-SPS) algorithm using the three different models and performed simulation studies using a digital phantom. Our experimental results show that, in spite of the more advanced features in the SAM and DDM, the traditional RTM implemented in the OS-SPS algorithm with an edge-preserving regularizer out-performs the SAM and DDM in restoring complex edges in the underlying object. The performance of the RTM in smooth regions was also comparable to that of the SAM or DDM.

• 한국음향학회지
• /
• 제21권1호
• /
• pp.73-81
• /
• 2002

본 논문에서는 중고주파영역에서의 진동해석기법인 파워흐름해석 법을 보와 평판이 연성된 구조물에 적용하기 위하여 무한보가 무한평판을 수직으로 투과하는 구조물에서의 파워투과반사계수를 파동전달법을 이용하여 구하였다. 이러한 파워투과반사계수를 실제 구조물에 적용하기 위해서는 파워흐름유한요소법으로의 활용이 필요하다. 이를 위해 본 논문에서는 파워투과반사계수를 이용하여 보 평판구조물을 위한 연결요소행렬식을 정립하였으며, 또한 보와 평판요소를 각각 해석할 수 있는 파워흐름유한요소해석 프로그램을 구성하고, 여기에 정립된 보와 평판간의 연결요소 행렬식을 대입하여 보와 평판이 연성된 구조물까지 해석이 가능한 프로그램으로 개발하였다. 이 프로그램을 이용하여 이상화한 선박의 선미부 구조물을 해석한 결과, 선박구조물에서 진동에너지분포를 구할 수 있었고, 진동 인텐시티를 통하여 구조물에서의 파워전달경로를 예측할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.763-767
• /
• 2002

This paper explores a structuring method for solid modeling processes of an automobile automatic transmission-lever design. The aim of this work is to establish standard procedures to minimize iterations and trial and errors during the product development process to increase development time and costs. The design of the transmission-lever is periodically required to be changed with the model change of an automobile. The transmission-lever design process has mainly depended on the designer's experience. It causes to make difficulties to handle the dependency of components. The design process can be improved by resolving the dependency problem using the DSM. The process of applying the DSM provides a systematic way for the solid modeling of transmission-lever by the consideration of geometry dependency.

• 한국재료학회지
• /
• 제18권7호
• /
• pp.362-366
• /
• 2008

The precipitation behavior in Mg-6 wt%Zn-1 wt%Y alloy annealed at different temperatures of $200^{\circ}C$ and $400^{\circ}C$ has been characterized by high resolution transmission electron microscope. When the alloy is annealed at $200^{\circ}C$ for 6 hr, the plate- and the rod-shaped ${\beta}_2'$ phases are precipitated in the matrix. The orientation relationship of plate-shaped precipitates with the matrix exhibits a [$11{\bar{2}}0]{\beta}_2$ || [$10{\bar{1}}0$]Mg, $(0001){\beta}_2'$ || (0001)Mg. While the rod-shaped precipitates have two kinds of the orientation relationships with the matrix, i.e. $[11{\bar{2}}0]{\beta}_2'$||[0001] Mg, $(0001){\beta}_2'||(11{\bar{2}}0)$ Mg and $[11{\bar{2}}0]{\beta}_2'$||[0001] Mg, $({\bar{1}}106){\beta}_2'||(10{\bar{1}}0)$ Mg. With increasing annealing time at $200^{\circ}C$ the ${\beta}_1'$ phases are also precipitated in the matrix and the orientation relationship exhibits a $[010]{\beta}_1'$ || [0001]Mg, $(603){\beta}_1'$ || ($01{\bar{1}}0$)Mg between the ${\beta}_1'$ precipitate and the matrix. The icosahedral phases are precipitated in the alloy annealed at $400^{\circ}C$ and exhibit a $[I2]_I$ || [0001]Mg relationship with the matrix.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.269-275
• /
• 2009

This paper represents a study on the conceptual design of new automatic bicycle transmission. The gear change in a commercial bicycle is carried out by moving the chain between sprockets. By the use of a multiple sprocket for speed change the power loss and transmission shock may occur. To solve the problem of bicycle transmission, the improved solution was derived by the technical contradiction matrix of TRIZ. The conceptual solution is one sprocket which replaces the function of multiple sprockets and adapts actively to the pitch of chain. And it was confirmed to be an adequate design through the Independence Axiom of design axiom.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.518-522
• /
• 2014

This paper is concerned with the dynamic modeling of transmission line undergoing galloping vibrations. To this end, the kinetic and potential energies of a uniform wire vibrating in space are derived. The equations of motion suitable for numerical simulations are derived using the assumed mode method and Lagrange equation. The resulting equations of motion are expressed in matrix form. To cope with bundled transmission line, the spacer was modelled by a spring element. As a numerical example, a two-wire transmission line combined by spacers was considered. Natural vibration characteristics show that the in-plane vibrations of the transmission line appeared in low frequency range, which may lead to galloping.

• 한국광학회지
• /
• 제19권2호
• /
• pp.150-158
• /
• 2008

확장된 존스 행렬법을 응용하여 등방성 매질과 이방성 매질의 경계면에서 투과계수를 근사적인 방법을 사용하지 않고 정확히 계산하였다. 광학 이방성이 작은 경우($|n_e-n_o|\;{\ll}\;n_o,\;n_e$), 계산된 투과계수가 근사식에 의한 투과계수와 일치하는 것을 확인하였다. 정확한 투과계수 표현을 사용하여 임의의 편광상태로 입사한 빛이 단축이방성 a-판을 투과한 후의 편광상태를 임의의 입사각과 방위각에 대하여 계산하였다. 또한 광축이 수직으로 교차된 이상적인 두 o-타입 편광자에 편광되지 않은 빛이 투과한 경우 투과율을 임의의 입사각과 방위각에서 계산한 후, 기존의 근사식과 비교하였고, 완전하지 않은 두 편광자의 소광계수와 두께의 변화에 따른 투과율을 계산하여 실제의 편광자를 상정한 소광도를 평가하였다. 근사식이 적용되지 않는 이방성이 큰 이방성 매질을 통과한 후의 빛의 편광상태를 분석할 때 적용될 수 있도록 정확한 투과계수를 사용하는 방법을 제시함으로써 액정 디스플레이 분야 광소자의 편광 분석에 기여하고자 하였다.

• 한국해양공학회지
• /
• 제36권5호
• /
• pp.313-325
• /
• 2022

Recently around the world, coastal erosion is paying attention as a social issue. Various constructions using low-crested and submerged structures are being performed to deal with the problems. In addition, a prediction study was researched using machine learning techniques to determine the wave attenuation characteristics of low crested structure to develop prediction matrix for wave attenuation coefficient prediction matrix consisting of weights and biases for ease access of engineers. In this study, a deep neural network model was constructed to predict the wave height transmission rate of low crested structures using Tensor flow, an open source platform. The neural network model shows a reliable prediction performance and is expected to be applied to a wide range of practical application in the field of coastal engineering. As a result of predicting the wave height transmission coefficient of the low crested structure depends on various input variable combinations, the combination of 5 condition showed relatively high accuracy with a small number of input variables defined as 0.961. In terms of the time cost of the model, it is considered that the method using the combination 5 conditions can be a good alternative. As a result of predicting the wave transmission rate of the trained deep neural network model, MSE was 1.3×10^-3, I was 0.995, SI was 0.078, and I was 0.979, which have very good prediction accuracy. It is judged that the proposed model can be used as a design tool by engineers and scientists to predict the wave transmission coefficient behind the low crested structure.

• Macromolecular Research
• /
• 제8권3호
• /
• pp.120-124
• /
• 2000

Clay-dispersed nanocomposites have been prepared by simple melt-mixing of two components, styrenic polymers with different content of functional groups and two different organophilic clays (Cloisite(R) 25A and Cloisite(R)30A) with a twin screw extruder. Dispersibility of 10-$\AA$-thick silicate layers of clay in the hybrid was investigated by using an X-ray diffraction method and a transmission electron microscope. It was found that if the interaction force between intercalant and matrix polymer is attractive, the matrix polymer intercalates more rapidly into the gallery of silicate layers. The faster intercalation of matrix polymer leads to the better dispersibility of silicate layers in the matrix polymer.