• Bulletin of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.425-428
• /
• 1992

Sodium substituted samples of $Y_{1-x}Na_xBa_2Cu_3O_{7-y}$ for $0.00{\leq}x{\leq}0.16$ were prepared and characterized by X-ray powder pattern, electrical resistivity and magnetic susceptibility measurements, Raman spectroscopy, and idometric titration. The Na substituted compounds have narrow solid solution limits where $0.00{\leq}x{\leq}0.16.$ As the Na concentration increases, the parent orthorhombic structure tends to gradually change to tetragonal. Small changes in the superconducting transition temperature, Tc, are observed in this solid solution region. Raman spectra for the Na phases are virtually identical with that of $YBa_2Cu_3O_7$ except that the Cu(1)-O(4) stretching mode at 504 $cm^{-1}$ and the Cu(2)-O(2,3) bending mode at 340 $cm^{-1}$ for x = 0.16 are slightly shifted. The hole concentrations of the sodium substituted compounds ranged from 0.31 to 0.33 per Cu site are increased with Na content. The substitution of $Na^+$ for $Y^{3+}$ site appears to create oxygen vacancies in the Cu-O chains, causes structural change from orthorhombic to tetragonal, and increases hole concentration in the substituted system.

• Korean Journal of Materials Research
• /
• v.31 no.8
• /
• pp.445-449
• /
• 2021

Zintl compound Mg₃Sb₂ is a promising candidate for efficient thermoelectric material due to its small band gap energy and characteristic electron-crystal phonon-glass behavior. Furthermore, this compound enables fine tuning of carrier concentration via chemical doping for optimizing thermoelectric performance. In this study, nominal compositions of Mg_3.8Sb_2-xTe_x (0 ≤ x ≤ 0.03) are synthesized through controlled melting and subsequent vacuum hot pressing method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) are carried out to investigate phase development and surface morphology during the process. It should be noted that 16 at. % of excessive Mg must be added to the system to compensate for the loss of Mg during melting process. Herein, thermoelectric properties such as Seebeck coefficient, electrical conductivity, and thermal conductivity are evaluated from low to high temperature regimes. The results show that Te substitution at Sb sites effectively tunes the majority carriers from holes to electrons, resulting in a transition from p to n-type. At 873 K, a peak ZT value of 0.27 is found for the specimen Mg_3.8Sb_1.99Te_0.01, indicating an improved ZT value over the intrinsic value.

• Advances in concrete construction
• /
• v.10 no.6
• /
• pp.515-526
• /
• 2020

Cold-mixed asphalt mixture is a widely recommended asphalt pavement materials with potentially economic and environmental benefits. Due to the reduction of natural non-renewable mineral resources, powder minerals with similar properties are considered as new mineral fillers in asphalt mixtures. This study explored the feasibility of using cement to replace natural limestone powder (LP) in emulsified asphalt concrete modified by styrene-butadiene styrene copolymer. The experimental tests, including compressive strength, Marshall stability as well as moisture susceptibility test, were used to investigate the mechanical properties, the Marshall stability, flow value, as well as the moisture damage. In addition, the influence of material composition on the performance of asphalt concrete is explained by the microstructure evolution of the pore structure, the interface transition zone (ITZ), and the micromorphology. Due to mineralogical reactivity of cement, its replacement part of LP improved the mechanical properties, Marshall stability, but it will reduce the moisture susceptibility and flow value. This is because with the increase of the cement substitution rate, the pore structure of the asphalt concrete is refined, the width of ITZ becomes smaller, and the microstructure is more compact. In addition, asphalt concrete with a larger nominal particle size (AC-16) has relatively better performance.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.178-182
• /
• 2006

This study was conducted to investigate the variation in sequence, the base composition and the sequence similarity of 18S rDNA (18S ribosomal RNA coding region) in the 10 Polygonatum spp. collections. The entire 18S rDNA region of 10 Polygonatum spp. collections ranged from 913 bp to 914 bp. There were 8 variable sites in the entire 18S region, and they were attributable to nucleotide substitution and deletion. $T{\rightarrow}C$ transition happened in 4 sites, and $A{\rightarrow}G$ transition happened in 1 site. $C{\rightarrow}A$ transversion happened in 1 site, and deletion happened in 2 sites. Transition rates were five times that of transversion. Base compositions of 18S rDNA were $23.09{\sim}23.33%$ in adenine, $23.33{\sim}23.52%$ in guanine, $25.60{\sim}25.85%$ in thymine and $27.38{\sim}27.79%$ in cytosine. The A + T content of 18S rDNA of 10 Polygonatum spp. collections averages 48.99%, ranging from 48.80% to 49.18%, and the G + C content averages 51.01%, ranging from 50.82% to 51.20%. Pairwise sequence comparisons indicated that 18S rDNA sequence similarity ranged from 99.7% to 100%.

• Korean Journal of Materials Research
• /
• v.22 no.2
• /
• pp.103-109
• /
• 2012

Red-emitting $Eu^{3+}$-activated $(Y_{0.95-x}Al_x)VO_4$ (0 < x $\leq$ 0.12) nanophosphors with the particle size of ~30 nm and the high crystallinity have been successfully synthesized by a hydrothermal reaction. In the synthetic process, deionized water as a solvent and ethylene glycol as a capping agent were used. The crystalline phase, particle morphology, and the photoluminescence properties of the excitation spectrum, emission intensity, color coordinates and decay time, of the prepared $(Y_{0.95-x}Al_x)VO_4:Eu^{3+}$ nanophosphors were compared with those of the $YVO_4:Eu^{3+}$. Under 147 nm excitation, $(Y_{0.95-x}Al_x)VO_4$ nanophosphors showed strong red luminescence due to the $^5D_0-^7F_2$ transition of $Eu^{3+}$ at 619 nm. The luminescence intensity of $YVO_4:Eu^{3+}$ enhanced with partial substitution of $Al^{3+}$ for $Y^{3+}$ and the maximum emission intensity was accomplished at the $Al^{3+}$ content of 10 mol%. By the addition of $Al^{3+}$, decay time of the $(Y,Al)VO_4:Eu^{3+}$ nanophosphor was decreased in comparison with that of the $YVO_4:Eu^{3+}$ nanophosphor. Also, the substitution of $Al^{3+}$ for $Y^{3+}$ invited the improvement of color coordinates due to the increase of R/O ratio in emission intensity. For the formation of transparent layer, the red nanophosphors were fabricated to the paste with ethyl celluloses, anhydrous terpineol, ethanol and deionized water. By screen printing method, a transparent red phosphor layer was formed onto a glass substrate from the paste. The transparent red phosphor layer exhibited the red emission at 619 nm under 147 nm excitation and the transmittance of ~80% at 600 nm.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.51-54
• /
• 2007

By substituting Cr in inverse-spinel $Fe_3O_4,\;Cr_xFe_{3-x}O_4$ thin film samples were prepared by sol-gel spin-coating method and their structural electronic, and magnetic properties were analyzed. X-ray diffraction indicates that the lattice constant decrease with increasing Cr composition (x). This result can be explained in terms of occupation of octahedral sites by $Cr^{3+}$ ions with smaller ionic radius than that of $Fe^{3+}$ Vibrating sample magnetometry measurements on the samples at room temperature revealed that saturation magnetization ($M_s$) decrease by Cr substitution, explainable by comparing spin magnetic moment among the related transition-metal ions. A decrease of magnetoresistence effect with x was observed, similar to that of $M_s$. The coercivity of the $Cr_xFe_{3-x}O_4$ films was found to increase with x, attributed to the increase of magnetic anisotropy by the existence of octahedral $Cr^{3+}(d^3)$.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2423-2427
• /
• 2011

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for nucleophilic substitution reactions of 3,4-dinitrophenyl diphenylphosphinothioate 9 with alkali metal ethoxides (EtOM, M = Li, Na, K) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plot of $k_{obsd}$ vs. [EtOM] is linear for the reaction of 9 with EtOK. However, the plot curves downwardly for those with EtOLi and EtONa while it curves upwardly for the one with EtOK in the presence of 18-crown-6-ether (18C6). Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constant for the reaction with dissociated $EtO^-$ and ion-paired EtOM, respectively) has revealed that the reactivity increases in the order $k_{EtOLi}$ < $k_{EtONa}$ < $k_{EtO^-}$ ${\approx}$ $k_{EtOK}$ < $k_{EtOK/18C6}$, indicating that the reaction is inhibited by $Li^+$ and $Na^+$ ions but is catalyzed by 18C6-crowned $K^+$ ion. The reactivity order found for the reactions of 9 contrasts to that reported previously for the corresponding reactions of 1, i.e., $k_{EtOLi}$ > $k_{EtONa}$ > $E_{EtOK}$ > $k_{EtO^-}$ ${\approx}$ $k_{EtOK/18C6}$, indicating that the effect of changing the electrophilic center from P=O to P=S on the role of $M^+$ ions is significant. A four-membered cyclic transition-state has been proposed to account for the $M^+$ ion effects found in this study, e.g., the polarizable sulfur atom of the P=S bond in 9 interacts strongly with the soft 18C6-crowned $K^+$ ion while it interacts weakly with the hard $Li^+$ and $Na^+$ ions.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.2
• /
• pp.223-252
• /
• 2008

In this study, we attempt to propose a choice-based diffusion model with switching cost, which can be used to forecast the dynamic substitution and competition among previous and new products at both individual-level and aggregate level, especially when market data for new products is insufficient. Additionally, we apply the proposed model to the empirical case of substitution and competition among Analog Cable TV that represents previous fixed charged broadcasting service and Digital Cable TV and Internet Protocol TV (IPTV) that are new ones, verify the validities of our proposed model, and finally derive related empirical implications. For empirical application, we obtained data from survey conducted as follows. Survey was administered by Dongseo Research to 1,000 adults aging from 20 to 60 living in Seoul, Korea, in May of 2007, under the title of 'Demand analysis of next generation fixed interactive broadcasting services'. Conjoint survey modified as follows, was used. First, as the traditional approach in conjoint analysis, we extracted 16 hypothetical alternative cards from the orthogonal design using important attributes and levels of next generation interactive broadcasting services which were determined by previous literature review and experts' comments. Again, we divided 16 conjoint cards into 4 groups, and thus composed 4 choice sets with 4 alternatives each. Therefore, each respondent faces 4 different hypothetical choice situations. In addition to this, we added two ways of modification. First, we asked the respondents to include the status-quo broadcasting services they subscribe to, as another alternative in each choice set. As a result, respondents choose the most preferred alternative among 5 alternatives consisting of 1 alternative with current subscription and 4 hypothetical alternatives in 4 choice sets. Modification of traditional conjoint survey in this way enabled us to estimate the factors related to switching cost or switching threshold in addition to the effects of attributes. Also, by using both revealed preference data(1 alternative with current subscription) and stated preference data (4 hypothetical alternatives), additional advantages in terms of the estimation properties and more conservative and realistic forecast, can be achieved. Second, we asked the respondents to choose the most preferred alternative while considering their expected adoption timing or switching timing. Respondents are asked to report their expected adoption or switching timing among 14 half-year points after the introduction of next generation broadcasting services. As a result, for each respondent, 14 observations with 5 alternatives for each period, are obtained, which results in panel-type data. Finally, this panel-type data consisting of $4{\ast}14{\ast}1000=56000$observations is used for estimation of the individual-level consumer adoption model. From the results obtained by empirical application, in case of forecasting the demand of new products without considering existence of previous product(s) and(or) switching cost factors, it is found that overestimated speed of diffusion at introductory stage or distorted predictions can be obtained, and as such, validities of our proposed model in which both existence of previous products and switching cost factors are properly considered, are verified. Also, it is found that proposed model can produce flexible patterns of market evolution depending on the degree of the effects of consumer preferences for the attributes of the alternatives on individual-level state transition, rather than following S-shaped curve assumed a priori. Empirically, it is found that in various scenarios with diverse combinations of prices, IPTV is more likely to take advantageous positions over Digital Cable TV in obtaining subscribers. Meanwhile, despite inferiorities in many technological attributes, Analog Cable TV, which is regarded as previous product in our analysis, is likely to be substituted by new services gradually rather than abruptly thanks to the advantage in low service charge and existence of high switching cost in fixed charged broadcasting service market.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1292-1300
• /
• 1996

In-site X-ray diffraction measurements under electric field up to 20kV/ cm were carried out on PLZT (x/70/30) with x=7.5, 8.0, 8.5, and 10.5 All of PLZT belonged to cubic phases. At x=7.5, 8.0 and 8.5 PLZT behaved as an antiferroelectric under low electric fields up to 4-8 kV/cm. PLZT became ferroelectric at the higher electric fields. The high-temperature measurements on the dielectric constants of PLZT with x=7.5, 8.0 and 8.5 showed that they were similar to relaxor ferroelectrics and underwent a diffuse phase transition from antiferroelectrics to paraelectrics at 50-7$0^{\circ}C$. Their P-E hysteresis curves confirmed that they were antifer-roelectrics. The broad distribution of Curie points suggests that there is a significant disorder of cations and vacances in the crystal structure of those PLZT due to La-substitution. The variation of the lattice strain of PLZT(10.5/70/30) with electic field was very small and did not show any hysteresis confirming that it was paraelectric. The degree of the electric-induced strain variation decreased as La doping increased. In PLZT(7.5/70/30) the intensity of 110 reflection changes sensitively by applying electric field. Some domains with polarization parallel to [110] appeared to be developed in the field-induced ferroelectric phase of the PLZT.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.129-136
• /
• 2004

Titanium and [titanium+Na(K)] substituted 11${\AA}$ tobermorites solids synthesized under hydrothermal conditions at 180$^{\circ}C$ exhibit cation exchange properties toward heavy transition metal cations, such as Fe$^{2+},\;Zn^{2+},\;Cd^{2+}\;and/or\;Pb^{2+}$. The amount of heavy metal cations taken up by these solids was found in the order: Fe$^{2+}>Zn^{2+}>Cd^{2+}>Pb^{2+}$, and reached maximum at 10% [Ti+K]-substituted tobermorite. The total cation exchange capacity of the 10% Ti+Na (K) - substituted tobermorites synthesized here range from 71 to 89 meq/100 g, and 50-56 meq/100g for Ti-substituted only. Results indicated that 10% [Ti+K] substitution exhibit cation exchange capacity more 2.4 times than the unsubstituted-tobermorite. This is due to the increase of the number of active sites on the exchangers. The incorporation of Ti and/or [Ti+Na(K)] in the lattice structure of synthesized tobermorites is due to exchange of Ti$^{4+}{\Leftrightarrow}2Ca^{2+}\;and/or\;Ti^{4+}+2Na^+(K^+){\Leftrightarrow}3Ca^{2+}$, respectively. The mechanism of Ti and [Ti+Na(K)] incorporations in the crystal lattice of the solids during synthesis and the heavy metal cations uptaken by these solids is studied.