• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.290-294
• /
• 2000

ZnS:Mn TFEL devices were fabricated by electron-beam evaporation method and then the electro-optical properties were investigated. To investigate the capacitance which was due to oxygen vacancy at the $Ta_2O_5$ thin film, AES(Auger Electron Spectroscopy) and C-F(capacitance-frequency) measurements were used. It was found that the capacitance was decreased by annealing the $Ta_2O_5$ film in oxygen ambience. From EL emission measurement, we observed the EL emission spectrum which had the peak range from 550nm and 650nm. This emission is associated with the transition from $^4T_1(^4G)$ first excited state to $^6A_1(^6S)$ ground state in the $3d^5$ energy level configuration of $Mn^{2+}$ occurs. The threshold voltage of EL device with $Ta_2O_5$ insulator layer was found to be 24V~28V. The CIE color coordinates of these emission are X=0.5151, Y=0.4202 which is yellowish orange emitting. The EL device using $Ta_2O_5$ insulator layer can be driven with a low voltage which is beneficial to the practical application.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.819-826
• /
• 2018

The generalized Hamming weight is one of the important parameters of the linear code. It determines the performance of the code when the linear codes are applied to a cryptographic system. In addition, when the block code is decoded by soft decision using the lattice diagram, it becomes a measure for evaluating the state complexity required for the implementation. In particular, a bit-parallel multiplier on finite fields based on trinomials have been studied. Cellular automata(CA) has superior randomness over LFSR due to its ability to update its state simultaneously by local interaction. In this paper, we deal with the efficient synthesis of the pseudo random number generator, which is one of the important factors in the design of effective cryptosystem. We analyze the property of the characteristic polynomial of the simple 90/150 transition rule block, and propose a synthesis algorithm of the reversible 90/150 CA corresponding to the trinomials $x^2^n+x^{2^n-1}+1$($n{\geq}2$) and the 90/150 reversible CA(RCA) corresponding to the maximum weight polynomial with $2^n$ degree by using this rule block.

• Journal of the Korean association of regional geographers
• /
• v.20 no.3
• /
• pp.256-258
• /
• 2014

This paper aims at examining the role of university, industry and government, which constitute the triple-helix innovation system in hi-tech cluster, based on the case of the Research Triangle Park, North Carolina, USA. Firstly, the state government has played a catalytic role by building the horizontal governance of triple-helix actors. By doing so, the state government has made it possible for not only growing but also transforming the RTP as an high-tech cluster. Secondly, universities in the triangle area have played to some extent a limited role in sustaining the evolution of cluster. Thirdly, the RTP has long been dominated by a small group of large firms. However, the situation has been changed since 1990s, because new start-ups from universities and local large firms and the technology transfer activities between universities and firms have been increased in the RTP and its surrounding area. Finally, it argues that the continuous evolution of the RTP has been to some or large extent influenced by the transition from the exogenous development model to the endogenous development model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.493-496
• /
• 2005

비정질 실리콘 (a-Si)의 수소화를 통해 활성화 수소가 비정질 실리콘내의 댕글링본드 (dangling bond) 와 결합 하므로 에너지밴드의 국재준위(localized state)를 감소시켜 불순물 도핑이 가능하게 되므로 a-Si 이 전자소자로서 이용 가능하게 되었다. 이에 착안하여 본 연구에서는 경사($0^{\circ}$, $45^{\circ}$, $80^{\circ}$) 증착을 통해 비정질 칼코게나이드($a-As_{40}Ge_{10}Se_{15}S_{35}$) 박막을 제작하고 그 박막을 수소화처리 (15~20atm at $150\sim190^{\circ}C$)하여 처리 전 후의 surface morphology 변화 및 광학적 특성 변화를 고찰하였다. $a-As_{40}Ge_{10}Se_{15}S_{35}$ 박막의 SEM 측정을 통해 $40^{\circ}$와 $80^{\circ}$ 경사 증착된 $a-As_{40}Ge_{10}Se_{15}S_{35}$ 박막에서 각각 18.8nm 와 160nm의 transition layer와 박막의 기둥(columnar)구조가 형성됨을 관찰하였다. 특히, $80^{\circ}$ 증착박막의 경우 수소처리전 columnar구조는 약 $65\sim70^{\circ}$의 기둥 각을 가지고 형성되었고 수소화 처리를 통해 기둥구조가 붕괴 되었다. $70^{\circ}$ 경사 증착된 $a-As_{40}Ge_{10}Se_{15}S_{35}$ 박막은 $0^{\circ}$에 따른 박막 보다 흡수단 부근에서 약 20%의 투과도 증가와 광 에너지 갭 ($E_{op}$)의 증가를 관찰 할 수 있었다. $80^{\circ}$경사 증착된 수소처리 박막에서 흡수단 부근의 투과도가 약 10%증가 되었고, 광 에너지 갭은 약 0.07eV 증가 하였고, PL intensity는 흡수단 부근에서 증가한 것을 확인 할 수 있었다. 이러한 변화들은 경사 증착된 $a-As_{40}Ge_{10}Se_{15}S_{35}$ 박막 내의 상대적으로 원자 밀도가 큰 기둥(columnar)구조가 생성되고, 이 원자 밀도가 높은 기둥구조의 댕글링본드와 주입된 수소가 흡착하여 에너지대의 국재준위를 감소시키기 때문으로 판단된다.

• Cross-Cultural Studies
• /
• v.23
• /
• pp.33-55
• /
• 2011

In the late Japanese colonial period, from the Sino-Japanese War until the Pacific War, critical discourses on the modern were prevalent in Japan and the Joseon. Despite the absence of a consensus about the specific definition of the modern, most thinkers agreed that the modern was something to be overcome. While some regarded naturalism and capitalism of the West as the essence of the modern, some others named scientism and humanism as the nature of the western modernity. Additionally, some criticized the temporal concept of historicism and brought new meanings of 'tradition' into relief, and some others advocated overcoming 'the West inherent in us'. This study is to consider the temporality of the theory of overcoming the modern focusing on the following three notions-world history, tradition, and emergency-, and examines the antinomy of them. The first notion to consider is 'world history'. The theorists of overcoming the modern, including the Kyoto school, discarded the progressive ideology that had led the Western modern history, and instead introduced 'world history' as a new notion. Although this resulted from the imperialistic embracement of the theories of Ranke, a major positivist historian from Germany, it contained antinomy of remaining in 'history' which was the modern temporal view. The second notion is 'tradition'. While the critical mind of 'world history' brought 'time of world' into question in the context of temporal realization, the notion of 'tradition' was to understand 'time of history' itself as the modern and overcome it. The critical mind of the notion involves the attempts to criticize regarding history as a 'progressive' process and to discover tradition as 'the present past' or 'the eternal present'. However, it also contained antinomy; the 'tradition' here was a notion that was created in the modern times, not passed down from ancient times. The third notion to consider is 'emergency', which was a method to define the present time as a transition period toward a new era, relating to states of war. However, the theorists of overcoming the modern did not regard 'emergency' as a particular time that strayed from normal states, instead they thought is as 'a regularized exceptional state', namely 'a state in which exceptions have become regulations'. However, the notion also contained antinomy since the word 'emergency' connotes abnormality.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.437-442
• /
• 2019

Green $BaSi_2O_2N_2:0.02Eu^{2+}$ phosphor is synthesized through a two-step solid state reaction method. The first firing is for crystallization, and the second firing is for reduction of $Eu^{3+}$ into $Eu^{2+}$ and growth of crystal grains. By thermal analysis, the three-time endothermic reaction is confirmed: pyrolysis reaction of $BaCO_3$ at $900^{\circ}C$ and phase transitions at $1,300^{\circ}C$ and $1,400^{\circ}C$. By structural analysis, it is confirmed that single phase [$BaSi_2O_2N_2$] is obtained with Cmcm space group of orthorhombic structure. After the first firing the morphology is rod-like type and, after the second firing, the morphology becomes round. Our phosphor shows a green emission with a peak position of 495 nm and a peak width of 32 nm due to the $4f^65d^1{\rightarrow}4f^7$ transition of $Eu^{2+}$ ion. An LED package (chip size $5.6{\times}3.0mm$) is fabricated with a mixture of our green $BaSi_2O_2N_2$, and yellow $Y_3Al_5O_{12}$ and red $Sr_2Si_5N_8$ phosphors. The color rendering index (90) is higher than that of the mixture without our green phosphor (82), which indicates that this is an excellent green candidate for white LEDs with a deluxe color rendering index.

• The Korean Journal of Archival Studies
• /
• no.45
• /
• pp.121-153
• /
• 2015

Struggles to gain acknowledgement of identity have a characteristic of movement to recover human dignity. Participants in this movement come to confirm themselves as the subject of rights and communicate one another, free from oppression. Being guaranteed the opportunity to participate in the public opinion formation process is an indispensable element of human rights. In 1980, though it was short and incomplete, Gwangju experienced communal autonomy under the condition that state power was temporarily stopped. The contents and memories of the Gwangju Democratization Movement that intended to protect autonomy of civil society, resisting pillage of state power, remain intact in the 1980 Archives for the May 18th. The 5.18 archives were registered in UNESCO's Memory of the World in 2011, with its value of human rights and protection of democracy being acknowledged. The 5.18 archives have memories of resistance and struggles for justice, and sacrifices and pains of citizens under oppressive political authority in Gwangju, 1980. Thus, these archives are related to the historical struggles for democracy, and suggest a lesson on the transition process towards democracy to us. Preservation and utilization of the documentary heritage constantly lead the memories of historical events to the present, and enable exchanges of experiences and ideas between the present and the future. This study, through the process of UNESCO's Memory of the World registration and post-registration process, beyond the value of archives, tries to examine how historical events are led to the present, through the archives and to discuss the other values of archives.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.498-505
• /
• 2020

Aggregate occupies about 70-85% of the concrete volume and is an important factor in reducing the drying shrinkage of concrete. However, when constructing high-rise buildings, it acts as a problem due to the high load of natural aggregates. If the load becomes large during the construction of a high-rise building, creep may occur and the ground may be eroded. Material costs increase and there are financial problems. In order to reduce the load on concrete, we are working to reduce the weight of aggregates. However, artificial lightweight aggregates affect the interface between the aggregate and the paste due to its higher absorption rate and lower adhesion strength than natural aggregates, affecting the overall strength of concrete. Therefore, in this study, in order to grasp the interface between natural aggregate and lightweight aggregate by type, we adopted a method of measuring electrical resistance using an EIS measuring device, which is a non-destructive test, and lightweight bone. The change in the state of the interface was tested on the outside of the material through a blast furnace slag coating. As a result of the experiment, it was confirmed that the electric resistance was about 90% lower than that in the air-dried state through the electrolyte immersion, and the electric resistance differs depending on the type of aggregate and the presence or absence of coating. As a result of the experiment, the difference in compressive strength depending on the type of aggregate and the presence or absence of coating was shown, and the difference in impedance value and phase angle for each type of lightweight aggregate was shown.

• Tunnel and Underground Space
• /
• v.33 no.3
• /
• pp.189-207
• /
• 2023

In the present study, the thermoshearing experiment on a rough rock fracture were modeled using a three-dimensional grain-based distinct element model (GBDEM). The experiment was conducted by the Korea Institute of Construction Technology to investigate the progressive shear failure of fracture under the influence of thermal stress in a critical stress state. The numerical model employs an assembly of multiple polyhedral grains and their interfaces to represent the rock sample, and calculates the coupled thermo-mechanical behavior of the grains (blocks) and the interfaces (contacts) using 3DEC, a DEM code. The primary focus was on simulating the temperature evolution, generation of thermal stress, and shear and normal displacements of the fracture. Two fracture models, namely the mated fracture model and the unmated fracture model, were constructed based on the degree of surface matedness, and their respective behaviors were compared and analyzed. By leveraging the advantage of the DEM, the contact area between the fracture surfaces was continuously monitored during the simulation, enabling an examination of its influence on shear behavior. The numerical results demonstrated distinct differences depending on the degree of the surface matedness at the initial stage. In the mated fracture model, where the surfaces were in almost full contact, the characteristic stages of peak stress and residual stress commonly observed in shear behavior of natural rock joints were reasonably replicated, despite exhibiting discrepancies with the experimental results. The analysis of contact area variation over time confirmed that our numerical model effectively simulated the abrupt normal dilation and shear slip, stress softening phenomenon, and transition to the residual state that occur during the peak stress stage. The unmated fracture model, which closely resembled the experimental specimen, showed qualitative agreement with the experimental observations, including heat transfer characteristics, the progressive shear failure process induced by heating, and the increase in thermal stress. However, there were some mismatches between the numerical and experimental results regarding the onset of fracture slip and the magnitudes of fracture stress and displacement. This research was conducted as part of DECOVALEX-2023 Task G, and we expect the numerical model to be enhanced through continued collaboration with other research teams and validated in further studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5B
• /
• pp.441-452
• /
• 2009

This paper describes the evaluation technique for climate change effect on daily precipitation frequency using daily precipitation generator that can use outputs of the climate model offered by IPCC DDC. Seoul station of KMA was selected as a study site. This study developed daily precipitation generation model based on two-state markov chain model which have transition probability, scale parameter, and shape parameter of Gamma-2 distribution. Each parameters were estimated from regression analysis between mentioned parameters and monthly total precipitation. Then the regression equations were applied for computing 4 parameters equal to monthly total precipitation downscaled by K-NN to generate daily precipitation considering climate change. A2 scenario of the BCM2 model was projected based on 20c3m(20th Century climate) scenario and difference of daily rainfall frequency was added to the observed rainfall frequency. Gumbel distribution function was used as a probability density function and parameters were estimated using probability weighted moments method for frequency analysis. As a result, there is a small decrease in 2020s and rainfall frequencies of 2050s, 2080s are little bit increased.