• 접착 및 계면
• /
• 제9권4호
• /
• pp.17-23
• /
• 2008

본 연구에서는 polyester polyol, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylolpropionic acid (DMPA), ethylenediamine (EDA) 및 나노 ZnO (SUNZnO)를 사용하여 폴리우레탄/나노 ZnO를 합성하였다. 나노 ZnO를 고형분의 0~1.0 wt%로 프리폴리머 단계에서 첨가하고 또한, 이온성기를 함량별로 도입하여 폴리우레탄/나노 ZnO를 합성하여 열적 성질, 기계적 성질을 검토하였다. 나노 ZnO 함량별로 혼입하였을 때 유리전이온도는 뚜렷한 경향을 보이지 않고 이온성기 함량이 증가함에 따라 $T_g$는 다소 상승하는 결과를 보였으며, 나노 ZnO의 혼입량과 이온성기 함량이 증가함에 따라 인장강도와 100% 탄성률은 대체로 증가하고 파단신율은 감소하는 경향을 보였다.

• 전기화학회지
• /
• 제21권3호
• /
• pp.55-60
• /
• 2018

최근 휴대용 기기의 급속한 발전이 이뤄지고, 다양한 전자제품에서 높은 성능의 이차 전지가 요구됨에 따라 고에너지밀도 특성을 가능케 하는 전극 재료의 연구가 주목받고 있다. 음극의 경우, 기존에 사용하고 있는 흑연재료를 대체하기 위하여 실리콘, 주석 등의 소재와 전이금속 산화물을 새로운 음극재료로 사용하려고 한다. 리튬 바나듐 옥사이드는 리튬 전이금속 산화물 기반의 음극 소재로서 흑연 대비 1.5배의 부피당 용량을 나타낼 수 있다는 장점을 가지고 있으나, 낮은 전기전도도와 입자 파쇄현상으로 인하여 전해질의 분해가 가속화되어 성능이 열화되는 문제점을 가지고 있다. 본 연구에서는 이러한 문제를 개선시키기 위하여 전해질 첨가제를 도입하여 전극/전해질 계면의 개질에 따른 리튬 바나듐 옥사이드의 전기화학적 거동 특성을 보고자 하였다.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.900-906
• /
• 2004

현재까지 개발되어 온 고체산화물 연료전지는 전해질로 사용되는 산소이온전도성 산화물의 저온에서의 낮은 전도도로 인해 그 사용영역이 제한되어 왔으며, 기판재료가 연료가스 확산층으로 사용되어야 한다는 점 때문에 저온작동을 위한 박막화 역시 명확한 한계를 가지고 있다. 이러한 문제점은 고도의 평활도를 갖는 균일한 나노기공성 기판재를 도입함으로써 해결될 수 있으며, 본 연구에서는 나노기공성 기판에 비정질 금속박막을 증착/산화하는 방안을 제시한다. 초박막형 성공정으로서, 산화 후 산소이온전도성 산화물을 구성하는 합금 타겟을 장착한 DC-magnetron sputter를 사용하여 $20{\sim}200nm$의 기공크기를 갖는 나노기공성 양극산화 알루미나 기판에 비정질 금속합금막을 형성하여 산화/열처리 과정을 거쳐 초박막 산화물 전해질의 제조공정을 실현하였다. 얻어진 박막의 가스투과특성, 입자/입계의 관찰, 상전이에 따른 결정구조/미세구조변화를 관찰하여 초박막 증착 및 전해질의 나노구조제어에 필요한 제반 기본물성데이터를 확보하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.125.2-125.2
• /
• 2015

The evolution of oxidation states of vanadium is monitored with ambient pressure X-ray photoemission spectroscopy. As the pressure of oxygen gas and surface temperature change, the formations of various oxidation states of vanadium are observed on the surface. Under 100mTorr of the oxygen gas pressure and 523K of sample temperature, VO2 and V2O5 are formed on the surface. The temperature-dependent resistance measurement on grown sample shows a clear metal-insulator transition near 350K. In addition, the measurement of Raman spectroscopy displays the structural change from monoclinic to rutile structures across the phase transition temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.172-172
• /
• 1999

Perovskite Manganese Oxide has been intensively investigated since the discovery of the colossal magnetoresistive(CMR) effect. In this paper, we studied the effect of temperature dependence and various doping dependence of rare earth site ions of La0.7-xPrxCa0.3MnO3 series using Ultraviolet Photoelectron spectroscopy(UPS). They show unusual temperature dependent features and the doped rare earth ions seem to affect the electron-phonon coupling strongly. We found clear evidence of metal-insulator transition from the spectral density at the Fermi level. but the transition temperature is lower than that deduced from transport measurements. Also we found that the spectral features change as time goes on implying that the surface of these materials is somewhat unstable in the vacuum. We can conclude from these results that the surface oxygen atoms correlated to the hopping electrons can escape from the material into the vacuum and that the surface state of these material is different from the bulk state.

• 센서학회지
• /
• 제16권6호
• /
• pp.407-412
• /
• 2007

For $VO_{2}$ sensors applicable to temperature measurement by using the nature of semiconductor to metal transition, the crystallinity, microstructure, and temperature vs. resistance characteristics were investigated systematically as a function of the annealing condition. The starting materials, vanadium pentoxide ($V_{2}O_{5}$) powders, were mixed with vehicle to form paste. This paste was screen-printed on $Al_{2}O_{3}$ substrates and then $VO_{2}$ thick films were heat-treated at $450^{\circ}C$ to $600^{\circ}C$, respectively, for 1 hr in $N_{2}$ gas atmosphere for the reduction. As results of the temperature vs. resistance property measurements, the electrical resistance of the $V_{2}O_{5}$ sensor in phase transition range was decreased by $10^{3.9}$ order. The presented critical temperature sensor could be used in fire-protection and control systems.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.361-365
• /
• 2015

Vanadium dioxide ($VO_2$) of monoclinic phase exhibits Metal Insulator Phase Transition (MIPT) phenomenon involving a sharp change in electrical and optical properties at $68^{\circ}C$. Solution-based process is applied to form uniform $VO_2$ coating layer on ceramic tiles. This can selectively block the near-infrared light to possibly reduce the energy loss and prevent dew condensation caused by the temperature difference. Heat treatment conditions including temperature and dwell time were examined to obtain a monoclinic $VO_2$ single phase. Both rutile and monoclinic $VO_2$ phases were observed from in the tiles post-annealed below $700^{\circ}C$. Desired monoclinic $VO_2$ single phase was grown in the tiles heat treated at $750^{\circ}C$. Nano facets of irregular size were observed in the monoclinic $VO_2$ phase involving the phase-transition. Grain growth of monoclinic $VO_2$ phase was observed as a function of dwell time at $750^{\circ}C$.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.128-128
• /
• 2003

Electrochromism (EC) is defined as a phenomenon in which a change in color takes place in the presence of an applied voltage. Because of their low power consumption, high coloration efficiency, EC devices have a variety of potential applications in smart windows, mirror, and optical switching devices. An EC devices generally consist of a transparent conducting layer, electrochromic cathodic and anodic coloring materials and an ion conducting electrolyte. EC has been widely studied in transition metal oxides(e.g., WO$_3$, NiO, V$_2$O$\sub$5/) Among these materials, WO$_3$ is a most interesting material for cathodic coloration materials due to its lush coloration efficiency (CE), large dynamic range, cyclic reversibility, and low cost material. WO$_3$ films have been prepared by a variety of methods including vacuum evaporation, chemical vapor deposition, electrodeposition process, sol-gel synthesis, sputtering, and laser ablation. Sol-gel process is widely used for oxide film at low temperature in atmosphere and requires lower capital investment to deposit large area coating compared to vacuum deposition process.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1047-1052
• /
• 1996

In this study, the thermal and optical proper-ties of multicomponent oxide glass fiber for IR sensor by adding heavy metal oxide Ga$_{2}$O$_{3}$ were investigated. The fiber samples were made by rod-in tube method. The optical loss of fiber was measured in 0.3-1.8/M wavelength region. As Ga$_{2}$O$_{3}$ increased up to 12wt%, the transition and softening temperature of bulk glass were increased from 495.deg. C to 564.deg. C and from 548.deg. C to 612.deg. C respectively. Whereas the thermal expansion coefficient was decreased from 102 to 88.2*10$^{-7}$ /.deg. C. The refractive index was increased from 1.621 to 1.662, and IR cut-off wavelength was enlarged from 4.64.mu.m to 5.22.mu.m. The optical loss of fiber was decreased and more remarkably decreased in 1.146.mu.m-1.8.mu.m wavelength region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.46-46
• /
• 2007

There has been rapid progress in the portable electronics industry. which has led to a great increase for a demand of portable, lightweight power sources. Lithium 2'nd batteries have met these demand. and many studies on the cahtod materials for the lithium 2,nd batteries have been reported during the last decade. Possible candidates for the cathode materials for lithium 2,nd batteries are $LiCoO_2$, $LiNiO_2$, and $LiMn_2O_4$. Currently $LiCoO_2$ is widely used. but $LiMn_2O_4$ is an excellent alternative material in view of its several advantages such a low cost as well as the wasy availability of raw materials and environmental benignity. In this study, find the most suitable synthesis method that satisfied high capacitor and stability cycle character, etc in Li-Mn oxide for 2'nd batteries. And also made an experiment on doping the $LiMn_2O_4$ spinel with a small amount of metal ions has a remarkable effect on the electrochemical properties and characterics of powder, BET, PSA, Porosity, etc.