• 한국전산유체공학회지
• /
• 제6권4호
• /
• pp.15-25
• /
• 2001

Numerical prediction of the diffusion controlled transition in a turbine gas pass is important because it can change the local heat transfer rate over a turbine blade as much as three times. In this study, the gas flow over turbine blade is simplified to the flat plate boundary layer, and an adaptive grid scheme redistributing grid points within the computation domain is proposed with a great emphasis on the construction of the grid control function. The function is sensitized to the second invariant of the mean strain tensor, its spatial gradient, and the interaction of pressure gradient and flow deformation. The transition process is assumed to be described with a κ-ε turbulence model. An elliptic solver is employed to integrate governing equations. Numerical results show that the proposed adaptive grid scheme is very effective in obtaining grid independent numerical solution with a very low grid number. It is expected that present scheme is helpful in predicting actual flow within a turbine to improve computation efficiency.

• 대한기계학회논문집B
• /
• 제24권10호
• /
• pp.1326-1334
• /
• 2000

The oscillatory excitation with a Strouhal number of 2.65 ncar the stagnation zone of hemispherical nose model was employed to control the laminar separation bubble and the transition to turbulence. The effects of oscillatory excitation upon the separation bubble and the transition were addressed in terms of kurtosis/skewness and time-frequency analyses. The measured noise spectrum of radiated sound from the turbulent boundary layer on the axi-symmetric infinite cylinder is compared with that by Sevik's wave-number white approximations. The noise sources in TBL on axi-symmetric cylinder and the caling of their far-field sound are also discussed.

• 한국기계가공학회지
• /
• 제10권3호
• /
• pp.100-107
• /
• 2011

To evaluate the wear characteristics of very thin ceramic coated layer, it is very important to investigate its wear process in great detail. An effective method for investigating the wear of a thin layer is the observation of wear process in microscopic detail, using in-situ system. In this study, based on the SEM Tribosystem as in-situ system, the microscopic wear mode of TiN coatings was investigated in repeated sliding. Consequently, four modes were revealed for TiN coatings: Ploughing, powder formation, flake formation and coating delimitation. Sc(Severity of contact) can clarify transition condition of those microscopic wear modes.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.36-43
• /
• 2015

Accurate prediction of supersonic transition is required for the heat transfer estimation over supersonic double compression ramp flows. Correlation-based transition models were assessed for a supersonic double ramp problem. Numerical results were compared with experimental data from RWTH Aachen University. A parametric study on the nose bluntness was performed using a selected transition model. As the nose bluntness increases, the boundary layer thickness is increased and the triple point of shock interactions moves downstream. The peak magnitude of the heat transfer is consequently decreased with the nose bluntness.

• 한국가시화정보학회지
• /
• 제20권1호
• /
• pp.29-37
• /
• 2022

We carried out a laboratory experiment about the thermo-fluidic characteristics of natural convection boundary layer over a vertical heated plate under constant heat flux condition. Particle image velocimetry has been applied to observe the surface convection velocity close to the vertical plate submerged in the water chamber with the condition of Ra = 7 × 10⁹ and Pr = 8.1. The velocity distributions indicate that the distinct stripe-like structures appears in the upstream (earlier transition region) and the distinct negative-positive and Λ(λ)-shaped flow structures in the downstream (mid-transition region). In addition, the temporal variation of spanwise and streamwise velocity is also presented.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.26-33
• /
• 2004

In this study, a boundary-layer bleeding and a two-staged fuel injection were applied to a scramjet engine for suppressing unstart transition and improving the thrust performance under Mach 6 flight conditions. With the boundary-layer bleeding, the engine could operate without unstart transition around at the fuel equivalence ratio of unity ($\Phi$ = 1). The thrust increment from the no fuel condition (dF) increased to 2460 N, which was about 1.4 times as large as that of the case without the bleeding and maximum in our Mach 6 tests. It was confirmed that the boundary-layer bleeding suppressed the separation during the engine operation. The two-staged fuel injection was less effective for improving the thrust performance com-pared with the single-staged one with the bleeding at Mach 6.

• 한국항공우주학회지
• /
• 제44권6호
• /
• pp.477-483
• /
• 2016

본 연구는 Particle Image Velocimetry(PIV) 기법을 이용하여 마하수 2.96의 평판에 대해 층류, 천이, 난류 경계층의 속도 분포를 측정하였다. Schlieren 가시화 기법과 PIV 기법을 이용하여 앞전에서 발생한 경사 충격파가 평판 위의 유동장에 영향을 주는지 확인하였다. 층류 경계층의 경우, 실험에서 측정한 속도 분포가 압축성 Blasius 속도 분포를 만족하였다. 천이 경계층의 속도 분포는 벽면 부근부터 이론적인 난류 속도 분포로 변했으며, Re = $1.41{\times}10^6$에서 천이가 시작되었다. 난류 경계층 영역에서는 압축성 효과를 고려한 Van Driest 변환 속도가 비압축성 로그 법칙을 만족하였다. 또한 로그 구간이 끝나는 위치($y/{\delta}{\approx}0.28$)가 비압축성 난류 경계층($y/{\delta}{\approx}0.2$)에 비해 벽면에서 더 멀어진 것을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.625-627
• /
• 2008

In this paper, a vertical via transition using a coaxial line is presented for LTCC SMT package applications. A part of outer conductor is cut off due to overlap between a CPW on PCB and transition. For reduction of radiation and return path, a cap is designed on the top layer. The measured S11 and S21 are -14 and 0.9dB, respectively at 15GHz.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.399-402
• /
• 2004

An aquifer thermal energy storage (ATES) model is simulated by FEFLOW according to the scenario of heat pump operation in two layered confining aquifer. The scenario is consisted of 4 steps: 90 days pumping (west well) and waste water injection (east well: 35 $^{\circ}C$), 90 day s stop, 90days pumping (east well) and waste water injection (west well: 5 $^{\circ}C$), and 95 days stop. The injection of the waste water is limited in the second layer and the first layer is aquitard. The temperature distribution at the surface shows low difference with reference temperature and opposit aspect with that of the second layer because the thermal transition through the first layer is very slow. Even though the simulated thermal transition in the aquifer system have a difference with real ATES system, optimal design and operate system can be developed with field tests and operational experience.

• 한국항공우주학회지
• /
• 제38권5호
• /
• pp.403-413
• /
• 2010

PSE와 $e^N$-method를 이용하여 익형 위 경계층의 천이지점을 예측하였다. PSE 해석으로 부터 교란의 증폭률을 얻고 증폭률의 적분을 통해 N-factor 곡선들을 계산하였다. 평판 및 익형 위 경계층에 대한 계산결과를 기존 문헌 결과와 비교하여 코드의 검증을 수행하였다. NACA0012, NLF(1)-0414F 그리고 NLF(1)-0416 익형 위 경계층에 대한 천이지점을 예측을 수행하였다. 예측된 천이지점들이 실험결과들과 잘 일치함을 확인하였다.