• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.695-702
• /
• 2002

Nonlinear dynamics of striped diffusion flames, by the diffusional-thermal instability with Lewis numbers sufficiently less than unity, is numerically investigated by examining various two-dimensional flame-structure solutions. The Lewis numbers for fuel and oxidizer are assumed to be identical and an overall single-step Arrhenius-type chemical reaction rate is employed in the model. Particular attention is focused on identifying the flame-stripe solution branches corresponding to each distinct stripe pattern and hysteresis encountered during the transition. At a Damkohler number slightly greater than the extinction Damkohler number, eight-stripe solution first emerges from one dimensional solution. The eight-stripe solution survives Damkohler numbers much smaller than the extinction Damkohler number until the transition to four-stripe solution occurs at the first forward transition Damkohler number. At the second forward transition Damkohler number, somewhat smaller than the first transition Damkohler number, the transition to two-stripe solution occurs. However, anu further transition from two-stripe solution to one-stripe solution is not always possible even if one-stripe solution can be independently accessed for particular initial conditions. The Damkohler number ranges for two-stripe and one-stripe solutions are found to be virtually identical because each stripe is an independent structure if distance between stripes is sufficiently large. By increasing the Damkohler number, the backward transition can be observed. In comparison with the forward transition Damkohler numbers, the corresponding backward transition Damkohler numbers are always much greater, thereby indicating significant hysteresis between the stripe patterns of strained diffusion flames.

• 한국전자파학회논문지
• /
• 제26권3호
• /
• pp.268-275
• /
• 2015

본 논문에서는 명료하고 간단한 초광대역 마이크로스트립-CPS(coplanar stripline) 전이구조 설계를 제안하였다. 등각사상을 이용하여 전이구조의 특성 임피던스를 해석을 하였으며, 닫힌 형태의 전이구조 공식을 제시하였다. 제안한 전이구조 공식의 계산 결과를 EM 상용 시뮬레이터와 비교하여 3.2 % 오차 이내임을 알 수 있었다. 초광대역 전이구조는 Klopfenstein 테이퍼를 이용하여, 광대역 임피던스 정합하였다. 제작된 전이구조는 5.39~40 GHz 이상의 대역에서 삽입손실 1 dB 이하 및 반사손실 10 dB 이상을 만족하였다.

• 한국전자파학회논문지
• /
• 제30권1호
• /
• pp.54-59
• /
• 2019

본 논문에서는 밀리미터파 대역에서 동작하는 inline 구조를 이용한 도파관-마이크로스트립 전이구조를 설계 및 제작하였다. 도파관-마이크로스트립 전이구조는 프로브, 인덕턴스 선로, ${\lambda}/4$ 임피던스 변환기, 그리고 50 ohm 마이크로스트립 선로로 구성되어 있으며, 각 구성 요소들의 특성 임피던스 및 길이를 시뮬레이션을 통하여 최적화하였다. 제작된 전이구조의 측정 결과, 밀리미터파 내 중심 주파수 94 GHz 구간에서 평균 2.1 dB 삽입손실 특성 및 13 dB 이하의 입출력 반사 손실 특성을 나타내었다.

• Journal of Photoscience
• /
• 제3권2호
• /
• pp.71-76
• /
• 1996

Anil K. Singh, Mrunalini M. Kapil, Department of Chemistry, Indian Institute of Technology Bombay - 400076, INDIA Purple membrane (PM, $\lambda$$_{max}$ 570 nm) of H. halobium on treatment with sulphuric acid changes its colour to blue ($\lambda$$_{max}$ 608 nm). The purple chromophore can be regenerated from the blue chromophore by exogeneous addition of anions such as CI$^-$ and HPO$_4^{2-}$. Chloride ion is found to be more effective than the dibasic phosphate ion in regenerating the purple chromophore. Nevertheless, one thing common to the anion regeneration is that both CI$^-$ and HPO$_4^{2-}$ show marked pH effect. At pH 1.0 the efficiency of regeneration of the purple chromophore is greater than at pH 2.0, for the same anion concentration. Fluorescence and circular dichroic studies indicate that the proteins do not undergo drastic changes at the secondary' or tertiary structure level and the native structure is preserved during this transition. However, chromophoric-site interactions between retinal and the apoprotein are affected during this colour transition. A molecular mechanism is advanced for this transition.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.557-562
• /
• 2017

In this paper, we show the design of a rotary joint transition for the X-band channel in a rotatable microwave communication system. The transition seems complicated to make a channel between two coaxial cables through a cylindrical waveguide. To make a broad-band performance in the X-band with low insertion loss and return loss given the constraint on the length and radius of this complicated-looking cylindrical structure, Genetic Algorithm optimization is adopted to check the validity of an intensive parametric study in the design. The structure is fabricated and tested to show how valid the design method is as well as good frequency responses.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3195-3200
• /
• 2011

The vibration resulting from railway operation is transmitted through the track and line structure, ground movements to adjacent buildings. As these vibration is growing, there is occurred exaggerated forces and displacements of the track and line structure and it is causing the differential settlement. It is difficult to clarify the dynamic response characteristics of trackbed because of various environmental conditions. However, track irregularity be affected by ununiformed bearing capacity and its dynamic response, study for dynamic response characteristics is required to investigate the cause of track irregularity and countermeasure. This study was intended to evaluate the numerical analysis which exam the response analysis characteristic of ground vibration by shape of cutting and embankment transition zone. The original method of analysis were have to examine variables such as directions, angles, drain conditions, linear conditions. However, In the analysis there were to consider the effect of moving loads according to directions of cutting and embankment transition zone.

• 한국전자파학회논문지
• /
• 제13권5호
• /
• pp.445-450
• /
• 2002

본 논문에서는 CPW(Coplanar waveguide)-to-microstrip right-angled 전이 구조에 대해서 해석하였다. 일반적으로 비대칭적인 CPW-to-microstrip 전이 구조는 불연속점에서 발생한 slot모드로 인해 심각한 공진이 발생한다. 공진 발생을 억제하기 위해서 일반적으로 많이 사용하는 air-bridge는 공진 발생을 근본적으로 제거시키지 못하고, 단지 공진 주파수만 이동시킨다. 따라서, 본 논문에서는 공진 발생을 제거하기 위해 offset microstrip을 사용하는 구조를 제안하였다. 제안된 구조는 불연속점에서 대칭을 유지함으로써 공진 발생 원인을 근본적으로 제거한 구조로 회로의 직접도가 높은 다층 기판에서 효과적으로 사용될 수 있을 것으로 기대된다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.76-83
• /
• 2005

Membrane type LNG Carriers are characterized by their special structures such as trunk deck above upper deck. It is necessary to introduce an appropriate structure arrangement taking into account transition of the trunk deck to the upper deck or deckhouse in fore and aft parts. The transition area at aft part -from trunk deck to the deckhouse - is to be specially considered because of high longitudinal stresses applied at the area. This study has been carried out to tackle the transitional structure problem in design stage This paper deals with not only mesh size of FE models for scantling evaluation and fatigue assessment but also technical issues regarding fatigue assessment.

• Bulletin of the Korean Chemical Society
• /
• 제15권11호
• /
• pp.949-953
• /
• 1994

In oxides characterized by the $K_2NiF_4-type$ structure, the low-spin${\to}$high-spin transition of trivalent cobalt ion was studied in function of the nature of competing bonds in the perovskite-plane and along the c-axis. Using Slichter and Drickamer's model the calculated values of parameters characterizing such a transition are correlated with the covalency of competing bonds along the c-axis of the $K_2NiF_4$-structure and the local structural distortion of the $(CoO_6)$ octahedron.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.625-627
• /
• 2008

In this paper, a vertical via transition using a coaxial line is presented for LTCC SMT package applications. A part of outer conductor is cut off due to overlap between a CPW on PCB and transition. For reduction of radiation and return path, a cap is designed on the top layer. The measured S11 and S21 are -14 and 0.9dB, respectively at 15GHz.