• 한국추진공학회지
• /
• 제22권2호
• /
• pp.52-58
• /
• 2018

유체 유동 시스템에서 히스테리시스 현상은 다양한 산업 및 공학 응용 분야에서 발생하며, 최근 이에 대한 많은 연구가 수행되어 왔다. 이러한 현상은 주로 압력비가 일시적으로 변화하는 과정에서 발생하며 초음속 풍동에 영향을 미칠 것으로 예상되나, 이에 대한 연구는 찾아보기 힘들다. 본 연구에서는 초음속 풍동 내부에서 발생하는 히스테리시스 현상을 수치해석으로 조사하였다. 비정상, 축대칭, 압축성 N-S 방정식을 유한 체적법으로 이산화 하였으며, 난류모델은 Spalart-Allmaras을 적용하였다. 본 연구의 결과로 전압의 증감에 따라, 동일한 압력비에서 발생하는 충격파의 위치가 다르게 나타났으며, 이를 통해 초음속 풍동을 효율적으로 작동시킬 수 있는 최적의 압력비를 찾을 수 있음을 알았다.

• Nuclear Engineering and Technology
• /
• 제18권2호
• /
• pp.107-116
• /
• 1986

새로이 개발된 망상구조 충전탑에서의 중수증류성능해석 및 설계를 위한 정상 및 비정상상태 모델을 수립하였다. 정상상태 모델은 MESH 방정식에 각단의 압력강하를 고려하여 설정하고, Equation Tearing방법으로 그 해를 구하여 중수중류탄내의 농도, 온도 및 압력구배를 얻었다. 비정상상태 거동해석을 위하여 Cohen의 이상단 모델을 수정한 평형단 전이모델을 세웠으며, 그 모델식의 해석적 해를 구함으로써 시간에 따른 중수 농축과정을 예측할 수 있게 되었다. 설정된 모델들은 전환류 중수증류탑에서의 실험결과와 매우 잘 일치하였으며 개발된 충전물임이 높은 이론단수에 낮은 압력강하, 저체류량을 갖는 우수한 중수농축용 충전물임이 확인되었다.

• 한국추진공학회지
• /
• 제23권3호
• /
• pp.58-66
• /
• 2019

본 연구에서는 다단연소 사이클 로켓엔진의 구성 부품에 대한 관계식을 이용하여 통합 엔진 시스템 성능해석 프로그램을 구축하여 시동 특성을 해석하였다. 엔진의 시동 특성은 다단연소 사이클 엔진의 시동부터 정상상태에 도달하는 시간까지 엔진 시스템의 진행과정 전체를 고려하여 해석되었다. 엔진의 시동과정동안 엔진의 엔진 파워팩의 RPM, 예연소기의 O/F비와 압력, 추진제의 유량과 같은 엔진 구성품의 시동 특성을 도출하였다. 또한 엔진의 시동과정에서 도출된 엔진의 성능특성 데이터와 실제 엔진의 연소시험을 통한 성능 데이터를 비교하였으며, 비교결과 엔진 시동과정의 해석 프로그램이 타당한 것으로 확인하였다.

• 한국항공우주학회지
• /
• 제49권9호
• /
• pp.749-757
• /
• 2021

쿼드로터를 활용한 운송 임무에서 임의의 유상하중을 장착하게 되면 질량, 관성모멘트, 무게중심의 위치와 같은 모델 파라미터가 변화하게 된다. 더욱이 유상하중이 기체에 장착되는 위치가 기체의 무게중심과 일치하지 않는 경우 무게중심의 변화는 야기되며 이는 제어 성능에 악영향을 미치게 된다. 이에 본 논문에서는 유상하중에 따른 모델의 불확실성을 보상하기 위하여, 선형 제차 조정기(Linear Quadratic Regulator, LQR) 기반의 모델 참조 적응 제어기법(Model Reference Adaptive Control, MRAC)을 제안한다. 먼저 고정된 유상하중을 고려한 쿼드로터의 동역학 모델을 유도하고, 선형 제차 조정기를 이용하여 기준제어기를 선정한다. 참조 모델은 과도응답을 향상하기 위해 폐루프 참조 모델을 사용하였으며, 선형 제차 조정기를 통하여 선정하였다. 또한, 안정성 분석을 통하여 모델 파라미터를 추정하기 위한 적응 제어기법을 설계하였다. 제안하는 제어기의 성능을 확인하기 위하여 모델 파라미터의 불확실성이 존재하는 상황에서 선형 재차 조정기와 성능을 비교하였다. 그리고 외란이 있는 상황에서 기존의 모델 참조 적응 제어기법과도 제안한 제어기의 결과를 비교하여 과도응답과 강건성에 대해서도 분석하였다.

• Clinics in Shoulder and Elbow
• /
• 제23권4호
• /
• pp.183-189
• /
• 2020

Background: The purpose of the current study was to investigate short- to mid-term outcomes and complications following radial head replacement (RHR) for complex radial head fractures and to identify factors associated with clinical outcomes. Methods: Twenty-four patients with complex radial head fractures were treated by RHR. The mean age of the patients was 49.8 years (range, 19-73 years). Clinical and radiographic outcomes were evaluated for a mean follow-up period of 58.9 months (range, 27-163 months) using the visual analog scale (VAS) score for pain, the Mayo elbow performance score (MEPS), the quick disabilities of the arm, shoulder and hand (Quick-DASH) score, and serial plain radiographs. Complications were also evaluated. Results: At the final follow-up, the mean VAS score, MEPS, and Quick-DASH score were 0.6±1.1, 88.7±11.5, and 19.4±7.8, respectively. The mean range of motion was 132.7° of flexion, 4.7° of extension, 76.2° of pronation, and 77.5° of supination. Periprosthetic lucency was observed in six patients (25%). Heterotopic ossification was observed in four patients (16.7%). Arthritic change of the elbow joint developed in seven patients (29.2%). Capitellar wear was found in five patients (20.8%). Arthritic change of the elbow joint was significantly correlated with MEPS (P=0.047). Four cases of complications (16.6%) were observed, including two cases of major complications (one stiffness with heterotopic ossification and progressive ulnar neuropathy and one stiffness) and two cases of minor complications (two transient ulnar neuropathy). Conclusions: RHR for the treatment of complex radial head fractures yielded satisfactory short- to mid-term clinical outcomes, though radiographic complications were relatively high.

• 마이크로전자및패키징학회지
• /
• 제29권1호
• /
• pp.7-16
• /
• 2022

최근 자동차 산업은 친환경, 편리함, 안전성과 같은 키워드를 중심으로 기술 발전이 이뤄지면서 빠르게 변화하고 있다. 친환경에 대한 관심과 맞물려 그린 카(green car)가 이목을 끌고 사용자 편의를 위한 첨단 기술 및 기능을 갖춘 고성능 자동차가 시장에 출시되고 있다. 발전하는 차량 성능으로 인해서 이에 맞는 전장품의 개발 또한 필수적이다. 자동차용 전장품은 고온, 고습, 열충격, 진동, 오염 등 복합적인 환경에서 사용되기 때문에 여타 산업에 비해 높은 수준의 신뢰성 검증이 필요하다. 특히, 부품 내 접합부의 신뢰성을 확보하여 무리없이 기능을 수행하고 운전자의 안전을 보장하는 것이 핵심이다. 따라서 저자는 차량 전장품의 최근 동향을 살펴보고 신뢰성을 향상시킬 수 있는 접합 방법으로 솔더링, TLP 접합 및 소결접합을 소개하였다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1549-1559
• /
• 2022

As an accident tolerant fuel (ATF) concept, oxide dispersion strengthened Zircaloy-4 (ODS Zry-4) cladding has been developed to enhance the mechanical properties of cladding using laser processing technology. In this study, a simulation technique was established to investigate the mechanical properties and effects of Y₂O₃ particles for the ODS Zry-4. A 3D representative volume element (RVE) model was developed considering the parameters of the size, shape, distribution and volume fraction (VF) of the Y₂O₃ particles. From the 3D RVE model, the Young's modulus, coefficient of thermal expansion (CTE) and creep strain rate of the ODS Zry-4 were effectively calculated. It was observed that the VF of Y₂O₃ particles had a significant effect on the aforementioned mechanical properties. In addition, the predicted properties of ODS Zry-4 were applied to a simulation model to investigate cladding deformation under a transient condition. The ODS Zry-4 cladding showed better performance, such as a delay in large deformation compared to Zry-4 cladding, which was also found experimentally. Accordingly, it is expected that the simulation approach developed here can be efficiently employed to predict more properties and to provide useful information with which to improve ODS Zry-4.

• Wind and Structures
• /
• 제34권5호
• /
• pp.407-419
• /
• 2022

Many factors should be considered by architects and designers for designing a tall building. Wind load is one of these important factors that govern the design of tall building structures and can become a serious challenge when buildings tend to be built very tall and slender. On the other hand, through the initial stages of a design process, choosing the design geometry greatly affects the wind-induced forces on a tall building. With this respect, geometric shapes with 3-fold rotational symmetry are one of the applied plan shapes in tall buildings. This study, therefore, aims to investigate the aerodynamic characteristics of 8 different geometrical shapes using Computational Fluid Dynamics (CFD) by measuring the drag and lift forces. A case study approach was conducted in which different building shape models have the same total gross area and the same height of 300 meters. The simulation was an incompressible transient flow that ran 1700 timesteps (85 seconds on the real-time scale). The results show a great difference between wind-induced force performance of buildings with different plan shapes. Generally, it is stated that the shapes with the same area, but with smaller perimeters, are better choices for reducing the drag force on buildings. Applying the lift force, the results show that the buildings with plan shapes that have rounded corners act better in crosswind flow while, those with sharp corners induce larger forces in the same direction. This study delivers more analytical understanding of building shapes and their behavior against the wind force through the parametric modelling.

• International Journal of Computer Science & Network Security
• /
• 제22권3호
• /
• pp.37-44
• /
• 2022

Plug-in Hybrid electric vehicles (PHEV) show great potential to reduce gas emission, improve fuel efficiency and offer more driving range flexibility. Moreover, PHEV help to preserve the eco-system, climate changes and reduce the high demand for fossil fuels. To address this; some basic components and energy resources have been used, such as batteries and proton exchange membrane (PEM) fuel cells (FCs). However, the FC remains unsatisfactory in terms of power density and response. In light of the above, an electric storage system (ESS) seems to be a promising solution to resolve this issue, especially when it comes to the transient phase. In addition to the FC, a storage system made-up of an ultra-battery UB is proposed within this paper. The association of the FC and the UB lead to the so-called Fuel Cell Battery Electric Vehicle (FCBEV). The energy consumption model of a FCBEV has been built considering the power losses of the fuel cell, electric motor, the state of charge (SOC) of the battery, and brakes. To do so, the implementing a reinforcement-learning energy management strategy (EMS) has been carried out and the fuel cell efficiency has been optimized while minimizing the hydrogen fuel consummation per 100km. Within this paper the adopted approach over numerous driving cycles of the FCBEV has shown promising results.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1071-1081
• /
• 2022

As the demand for high-rise buildings increases, the demand for high-speed elevators is also increasing. In order to make a high-speed elevator, a method is needed to reduce the weight of the elevator's components, which is a constraint on the increase in speed. As a measure to reduce the weight, it is possible to remove the traveling cable for power and signal supply. Since the weight of the traveling cable varies depending on the position of the carriage, it is difficult to compensate the weight using the counter weight. The power supply is a structure in which a brush-rail type power input terminal is installed in the elevator hoistway to receive power in a contact-type manner while the carriage is moving. If a small-capacity ESS is installed in a passenger car, power can be supplied uninterruptedly inside the passenger car. A small-capacity ESS charging system to be applied to such an elevator system is required to perform several functions. First, the passenger Car must be able to charge as much as possible even during high-speed operation. A control algorithm with high responsiveness is required because charging starts and ends repeatedly by the partially installed input power stage. In addition, if the input-side line impedance is large due to the structure of the system and the response characteristic is increased, the stability of the system may be lowered. Accordingly, in this paper, we propose a control algorithm that has a stable steady-state output while having a fast response in a transient state. To verify the proposed control algorithm, simulation was conducted using PSIM, and the performance of the controller was verified by manufacturing a prototype buck conveter charger.