• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.503-505
• /
• 1995

The surge arrester plays a vital role in the protection of substation against transient overvoltages resulting from lightning surges and system switching operations. The proper selection and application of the surge arrester is an integral part of the process of substation equipment insulation level selection. The paper outlines the basic consideration in modeling the lightning stroke, the surge arrester, and the system to be protected. The paper discusses the results of various cases simulated using the alternative transient computer program to evaluate the separation effects.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1596-1602
• /
• 2006

In this paper, a hybrid sensor is proposed that has two capabilities: the first is to sense longitudinal or flexural transient vibration signals selectively which are transmitted along the target shaft, and the second to measure the rotating speed of the shaft. All measurements are made in a non-contact manner since this sensor uses magnetostriction as its measuring principle. The signal selection between two vibration modes requires only electrical switching operations and the switching between these two sensing capabilities-vibrations and rotational speed-are accomplished by a very simple mechanical operation. To verify the capabilities of the proposed sensor, a prototype sensor is fabricated and the experiments are made. The results show this sensor can embody two sensing capabilities in one sensor configuration.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1145-1153
• /
• 2014

It is well known that line switching operations like reclosing are able to cause transient power oscillations which can stress or damage turbine generators. This paper presents a reclosing scheme to reduce the shaft torsional torques of turbine generators by inserting an additional reactor. A novel method to determine optimal reactor capacity to minimize the torsional torque generated in a turbine generator is also proposed. In this paper, the turbine generator shaft is represented by a multi-mass model to measure torsional torques generated in the shaft between the turbine and the generator. Transmission systems based on actual data from Korea are modeled to verify the proposed scheme using ElectroMagnetic Transient Program (EMTP) software. The simulation results clearly show the effectiveness of the proposed scheme and torsional torque can be minimized by applying the proposed scheme.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.413-437
• /
• 2022

An innovative concept for wet-transportation and stepwise installation of mono-bucket foundation for 15 MW offshore wind turbine is proposed. Case studies for two different mono-bucket and wrap-buoy dimensions are conducted and their hydrostatic and hydrodynamic performances are compared for both wet-towing and lowering operations. The intact stability and transient responses are analyzed in detail for various stages of lowering operation. Wave-induced motion statistics during wet tow in sea state 4 (highest operational window) are checked. The proposed concept is found to be feasible and can be an alternative cost-effective solution without using heavy-lift crane vessel in practice.

• 한국경영과학회지
• /
• 제29권4호
• /
• pp.1-10
• /
• 2004

In this paper we study bounds for characteristics of stationary waiting times in (max, +)-linear systems with a Poisson arrival process. which are prevalent in manufacturing systems, kanban systems, cyclic and acyclic fork-and-join type systems, finite or infinite capacity tandem queues with various kinds of blocking, transportation systems, and telecommunication networks, and so on. Recently, some results on series expansion for characteristics, such as higher moments, Laplace transform, and tail probability, of transient and stationary waiting times in a class of (max, +)-linear systems via Taylor series expansions have been studied. In order to overcome the computational complexity in those results, we consider bounds for characteristics of stationary waiting times using valuable stochastic ordering results. Some numerical examples are also provided.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.1001-1009
• /
• 1994

The present paper deals with a new developed sensor for measuring the time-varying magnetic fields and describes the experimental results of trasient magnetic field that takes place during the operations of electric appliance. The operation principle of the self-integrating magnetic field sensor by using coaxial cable is analyzed and a calibration investigation is carried out. The frequency bandwidth of the magnetic field measurement system is from 40 Hz to about 300 kHz. The magnetic field induced by the starting and/or operation of electric appliance mainly includes the odd harmonics such as the third, the fifth and the seventh harmonics. The magnetic field intensity caused during the operation of ultrasonic washer is inversely proportional to distance, this correspodns to induction component. As a result, it was known that the odd harmonics of magnetic field in the desing of electromagnetic shield employed for protecting electronic circuit and control devices have to be considered.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.492-501
• /
• 2018

In the rotor-flux oriented control used in induction motors, the electrical parameters of the motors should be identified. Among these parameters, the mutual inductance and rotor resistance should be accurately tuned for better operations. However, they are more difficult to identify than the stator resistance and stator transient inductance. The rotor resistance and mutual inductance can change in operations due to flux saturation and heat generation. When detuning of these parameters occurs, the performance of the control is degenerated. In this paper, a novel method for the concurrent identification of the two parameters is proposed based on recursive least square estimation and model reference adaptive control.

• 한국경영과학회지
• /
• 제20권3호
• /
• pp.1-16
• /
• 1995

Group collaborative systems are recently emerging to support a group of users engaged in common tasks such as group decision making, engineering design, group scheduling, or collaborative writing. This paper provides an change management framework for the group collaborative system to facilitate managing dependency relationship between shared objects and dependent user views, and coordinating change and propagation activities between the two in distributed computing environments. Specifically, the framework adopts an object-oriented database paradigm and presents several object constructs capturing dependency management and change notification mechanisms. First, it introduces change management mechanisms with transient shared objects and secondly, it extends them into presistent object computing environment by integrating transaction management mechanisms and change notification mechanisms. A prototype change management framework is developed on a commercial object-oriented database management system.

• 산업융합연구
• /
• 제4권1호
• /
• pp.87-107
• /
• 2006

Foodservice industry serves enormous volumes of food each day, yet they rely on what might be the most poorly educated, most transient, and youngest work force in the whole food industry. These individuals handle every meal or item which is served. It is a situation ripe for problems, problems which are all too real. HACCP system is a preventive approach stages where loss of control could present a food safety risk in a food service operation. But it is very difficult to using HACCP Plan. The objective of this study was to develop a HACCP Plan using Six Sigma Methodology. This new HACCP Model from this study will be left to the each operation to develop for themselves. This means that foodservice industry operations should modify new HACCP Model provided in this study to establish their own HACCP system for use in their own operations.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.231-236
• /
• 1996

The xenon dynamics module in the nuclear design code MASTER was verified through a simulation calculation. The simulation result shows that the xenon dynamics module in MASTER can trace and predict xenon behavior with accuracy under any core transient state and therefore can simulate load follow operations.