• Herbal Formula Science
• /
• v.5 no.1
• /
• pp.184-202
• /
• 1997

The results of immune response and antiallergic reaction were as follows. 1. Hemagglutinin titer and hemolysin titer were increased in case of AMR, AR, SNH. But the results were not recognized as having significance. 2. PFC was increased in case of AMR, AR. But the results were not recognized as having significance. 3. RFC was increased in all groups, and the results in the AR, SNH were significant. 4. In experimentation of phagocytic activity in peritoneal exudate cells, AR and SNH showed significant increase. In spleen cells AR and SNH showed significant increase. In monolymphocytus cells AMR, AR and SNH were increased, but result of AMR was of no significance. 5. I examined promotion on spleen cells transformation. As these results, AMR showed increase in $50{\mu}g/m{\ell}$, $5000{\mu}g/m{\ell}$ in comparison with control group. And in $500{\mu}g/m{\ell}$ AMR showed increase in case of 24 hours, 72 hours incubation, but showed decrease in case of 48 hours incubation. AR showed increase in all. In $50{\mu}g/m{\ell}$ SNH showed increase in comparison with control group. And in $500{\mu}g/m{\ell}$, $5000{\mu}g/m{\ell}$ SNH showed increase in case of 24 hours, 48 hours incubation, but showed decrease in case of 72 hours incubation. 6. I examined proliferation of spleen cells. As these results AMR and SNH showed the highest increase in $50{\mu}g/m{\ell}$, but showed the lowest increase in $5000{\mu}g/m{\ell}$. AR showed the highest increase in $500{\mu}g/m{\ell}$, but this result was the almost same in $50{\mu}g/m{\ell}$, $5000{\mu}g/m{\ell}$. And AMR, AR, SNH showed higher activity in Lipopolysaccharide than Concanavalin A. 7. In all groups results of PCA were decreased in 2 week. In 4 week AR and SNH showed decrease, but AMR didn't show change. In 6 week AR and SNH showed decrease, but on the contrary AMR showed increase. 8. In experimentation on histamine contents, AMR showed significant increase at first agent contact. And AR, SNH showed decrease at first agent contact, but these results were of no importance. At second agent contact AMR showed decrease, but was of no importance. AR, SNH showed significant decrease. At third agent contact, AMR showed significant increase. AR, SNH showed decrease, but these results were of no importance. From above these results, AR and SNH showed good effects on immunoreaction. And all the herb medicines in this examination showed good effects in promotion on spleen cells transformation and proliferation of spleen cells, especially activated B-cells. AR, SNH showed good effects on anti-allergic reaction, but AMR was almost inefficient. Accordingly I think that AR shall be used in disease bringing about a lowering of immunity, that is, AR shall be used in strengthening the body resistance. And I think that SNH shall be used in eliminating pathogenic factors with strengthening the body resistance. It is necessary to a deep study in future.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.713-724
• /
• 2001

Hydrologists have tried to develop monthly runoff simulation models which are important factor in wafer resources planning. One of the models called Kajiyama formu]a is widely used for monthly runoff simulation in Korea. In recent work by Xiong and Guo (1999), they suggested Two-parameter monthly water balance model to simulate the runoff and showed that the model can be used for the water resources planning program and the climate impact studies. However, they estimated two parameters of transformation of time scale, c and of the field capacity, SC by the trial and error method. Therefore, the purpose of this study is to suggest the estimation methodologies of c and SC, and compare Kajiyama formula with a Two-parameter monthly water balance model to simulate the runoff in Han river and IHP representative basins in Korea. The c is estimated by using the relationship of actual and potential evaporations, and SC is estimated from association with CN. We show that the estimated c and SC can be used as the initial or optimal values in the model.

• Journal of the Korean Mathematical Society
• /
• v.53 no.3
• /
• pp.709-723
• /
• 2016

Let C[0, t] denote a generalized Wiener space, the space of real-valued continuous functions on the interval [0, t] and define a random vector $Z_n:C[0,t]{\rightarrow}{\mathbb{R}}^n$ by $Zn(x)=(\int_{0}^{t_1}h(s)dx(s),{\cdots},\int_{0}^{t_n}h(s)dx(s))$, where 0 < $t_1$ < ${\cdots}$ < $t_n$ < t is a partition of [0, t] and $h{\in}L_2[0,t]$ with $h{\neq}0$ a.e. In this paper we will introduce a simple formula for a generalized conditional Wiener integral on C[0, t] with the conditioning function $Z_n$ and then evaluate the generalized analytic conditional Wiener and Feynman integrals of the cylinder function $F(x)=f(\int_{0}^{t}e(s)dx(s))$ for $x{\in}C[0,t]$, where $f{\in}L_p(\mathbb{R})(1{\leq}p{\leq}{\infty})$ and e is a unit element in $L_2[0,t]$. Finally we express the generalized analytic conditional Feynman integral of F as two kinds of limits of non-conditional generalized Wiener integrals of polygonal functions and of cylinder functions using a change of scale transformation for which a normal density is the kernel. The choice of a complete orthonormal subset of $L_2[0,t]$ used in the transformation is independent of e and the conditioning function $Z_n$ does not contain the present positions of the generalized Wiener paths.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.864-873
• /
• 2002

Recently, CFT Column has reported a lot of study result, because a CFT column has certain superior structural properties as well as good productivity, execution efficiency, and improved rigidity over existing column. However, CFT column still has problems clearing the capacity evaluation between its steel tube member and high-strength concrete materials. Also, high-strength concrete filled steel square tube column(HCFT) examined numerical value explanatorily about transformation performance(M-ø) of when short-column receives equal flexure-moment from axial stress on research for concrete. hnd, with basis assumption, executed development of analysis program of moment-curvature relation for analytic analysis of transformation performance of HCFT section that get by an experiment. This study investigated to properties of structural(capacity, curvature), through a series of experiments for HCFT with key parameters, such as strength of concrete(600kgf/$\textrm{cm}^2$), D/t ratio, slenderness ratio(λ) and concrete kinds under eccentric load. And, I executed comparative analysis with AISC-LRFD, AIJ and Takanori Sato etc. and experiment result that is capacity design formula.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.102-109
• /
• 1986

Based on the Hartenberg-Denavit symbolic equation, which is one of equations for the kinematic analysis of three dimensional (3-D) linkage, a generalized kinematic motion equation is derived utilizing Euler angles and employing the coordinates transformation. The derived equation can feasibly be used for the motion analysis of any type of 3-D linkages as well as 2-D ones. In order to simulate the general motion of 3-D linkgages on digital computer, the generalized equation is programmed through the process of numerical analysis after converting the equation to the type of Newton-Raphson formula and denoting it in matrix form. The feasibility of theoretically derived equation is experimentally proved by comparing the results from the computer with those from experimental setup of three differrent but generally empolyed 3-D linkages.

• School Mathematics
• /
• v.10 no.3
• /
• pp.443-461
• /
• 2008

The purpose of this study was to provide teachers with suggestions on how to teach the unit of finding the area of plane figure by analyzing students' different solution methods. The solution methods were analyzed according to how the original area of the given figure was kept: partition, transformation, and elimination. The partition method was most used. With regard to transformation, students seemed to find it easy to use the area of rectangle. With regard to elimination, students were successful using elimination to find the area of a given figure but had difficulty in producing a formula from the method. The teacher played a key role to encourage students to employ different solution methods, and gave them opportunities to compare and contrast various methods. A cautionary note is that, with too much emphasis on 'variety', the mathematical efficiency may be lost in the process. It suggests that a teacher should be careful to establish appropriate sociomathe- matical norms with students in order that they can make their own judgment on which solution method is mathematically worth and efficient.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.6
• /
• pp.831-838
• /
• 1995

Geometric transformations require many operations in displaying moving 3D objects on the screen and a fast computation is a important problem in CAD or animation applications. The general method to compute the transformation coordinates of an object represented by an octree must perform the operations on every node. This paper proposes an efficient method that computes the rectangular coordinates of the vertices of the octree nodes into the coordinates of the universe space using the basicvectors in order to compute quickly geometric transformations of 3D images represented by an octree. The coordinates of the vertices of each octant are computed by using the formula presented here, which requies additions and multiplications by powers of 2. This method has a very fast execution time and is compared with the general computation method.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.120-125
• /
• 2012

Because ships and offshore structures have very large dimensions and complicated shapes, it is difficult to determine the deformation or internal stress in the structure by simple lab tests. Thus, a rigorous analysis by using the computer simulation technology is essential for obtaining their distortions by considering the entire production process characteristics. The rapid development of computer technology made it possible to analyze the heat transfer phenomena, deformation and phase transformation in the welded joint. For large shell structures, shell elements modeling contributed primarily to this development. But if a welding is done by multi-pass, shell elements whose thickness are unchangeable can hard to describe the local situation. Recently, it was researched how to introduce the imaginary temperature for V grooved multi-layer butt welding in strain-boundary method (a kind of shrinkage methodologies). In the present study, we formulated the imaginary temperature for the double bevel and double V groove by considering the thickness change of each pass through the bead and the thickness directions simultaneously and also demonstrated the feasibility of the formula by applying it to the thermal distortion analysis of the erection process of crane pedestal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.376-383
• /
• 1996

In general, the electromagnetic field analysis of a vertical dipole mainly deals with the space. wave. But when only the space wave is considered, as a receiving point is close to the surface of medium, the receiving electric field strength is rapidly decreased. In this paper, to solve this problem, we considered both the surface wave and the space wave contribution. When the vector potential is used with the angular spectrum transformation method, the space wave and the surface wave are included in the final electric field expression. By using this final electric field expression, the effect of the surface wave is analyzed through simulations and the factors having effect on a propagation phenomenon of sea surface are studied in detail. Also, the justification of the theoretical formula was proved by comparing theoretical values with measuring ones at 880. 2MHz which is the frequency of mobile communication.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.1-7
• /
• 2001

Mainly, Floating Breakwaters (FBs) have been constructed in many coastal regions due to the advantages of the coastal environment and construction cost. In general, the FB becomes fixed or its width broadened because the movement of the FB comes to be large and its the wave control function lower for the long period incident waves. This study discusses the wave control function of two-rowed Fixed Floating Breakwater (FFBs) that have narrower width than that of the one-rowed FFB by using numerical approach. Boundary Element Method (BEM) based on the Green formula and Eigenfunction Expansion Method (EEM) are applied to evaluate the three-dimensional wave transformation near the wave fields of two-rowed FFBs. The validity of the present study is confirmed by comparing it with the results of Ijima et al. (1974) and Yoshida et al. (1992) for the one-rowed Fixed Floating Structure. It is revealed that the wave control function of two-rowed FFBs is more effective than that of the one-rowed FFB.