• 한국해안해양공학회지
• /
• 제4권3호
• /
• pp.161-167
• /
• 1992

서로 다른 유한수심을 갖는 두 영역을 연결하는 해저단위로 전파하는 비분산 유한진폭장파를 고려한다. 2차원 운동을 가정하고, 파봉선이 단과 평행하며, 비점성류체에서의 비회전운동으로 본다. 유한진폭파의 변형을 기술하기 위하여 유한진폭 천해정식과, 단위의 연결부에서 Riemann 변수로 나타낸 질양보존 및 압력연속조건들을 사용한다. 식들에 의하면 Riemann 불변양이 일정한 네 조의 특성유선과 입사, 반사 및 전달파의 진폭을 관련지어 주는 2개의 비선형방정식이 정의된다. 얻어진 방정식계는 통상의 형태로는 해석하기가 어려워 지진 해일파에 실용적으로 사용할 수 있는 특수한 경우만 고려한다. 얻어진 결과들을 장파이론과 비교하였고 아주 작은 진폭의 파인 경우에도 뚜렷한 비선형 효과가 제시되었다.

• 한국세라믹학회지
• /
• 제30권4호
• /
• pp.289-298
• /
• 1993

Properties in terms of the variation of the glass compositions, which were density (p), molar volume(Vm), atom/ion packing density (Dp), refractive index (nD), transformation temperature (Tg), dilatometric softening point (Td), thermal expansion coefficient (α), Young's modulus (E), and knoop hardness (KHN) were investigated in CaO-SiO2 glasses and CaO-P2O5-SiO2 glasses containing less than 10mole% of P2O5. Those properties were measured by density measurement kit, Abbe refractometer, dilatometer, ultrasonic pulse echo equipment, and micro hardness tester. When CaO content was increased in CaO-SiO2 glasses, p, Dp, nD, Tg, Td, α, E and KHN were increased, while Vm was decreased. When P2O5 was added to the CaO-SiO2 glasses with constant CaO/SiO2 ratio as 1.07, p, Dp, nD, Tg, Td, α, E and KHN were decreased, while Vm was increased. When the amount of P2O5 in glasses was kept constant, the changes of the properties with variation of CaO content in the CaO-P2O5-SiO2 glasses were very similar to those of CaO-SiO2 glasses. These phenomena could be explained by the structural role of P2O5 in the CaO-P2O5-SiO2 glasses, which was polymerization of siicate structures and resulted in [PO4] monomer structure in glasses. Due to this structural characteristics, the bond strength and packing density were changed with compositions. Proportional relationships between 1) np and Dp, 2) Tg, Td, α and CaO content, 3) E and Vm-1, and 4) KHN and P2O5 content were evaluated in this investigation.

• 한국광물학회지
• /
• 제17권3호
• /
• pp.201-208
• /
• 2004

천연산 헤덴버자이트(Ca,Fe) $SiO_3$ 시료에 대해 일정한 압력 하에서 약 $1200^{\circ}C$ 정도로 가열한 후, x-선 회절실험을 시행하였더니 14～24 GPa 압력구간에서 등축정계에 속하는 석류석 상이 관찰 되었다. $CaSiO_3$-석류석 상에 대한 체적탄성률 = 155 GPa 및 $V_{\Phi}$ = 6.58 km/sec 및 기타 탄성특성을 유사구조의 계통과 $KV_{m}$ = 상수 및 $V_{\Phi}$$M^{$\frac{1}{2}$}$ = 상수 관계식을 이용하여 추정하였다 석류석 상은 천연산 헤덴버자이트에 상당량 포함되어 있는 Mn과 많은 미량원소에 의해 상당히 넓은 압력에 걸쳐 안정영역을 구축하며, 비가역적 반응을 보인다. Ca의 포용광물로 $CaSiO_3$-석류석 상은 맨틀전이대의 주요 광물상의 하나로 간주할 수 있다.

• 전력전자학회논문지
• /
• 제23권2호
• /
• pp.86-93
• /
• 2018

In this work, control methods and operating modes are proposed to manage standalone microgrid. A standalone microgrid generally consists of two sources, namely, battery energy storage system (BESS) and diesel generator (DG). BESS is the main source that supplies active and reactive power regardless of load conditions, whereas DG functions as an auxiliary power source. BESS operates in a constant voltage constant frequency (CVCF) control, which includes proportional-integral + resonant controller in a parallel structure. In CVCF control, the concept of fundamental positive and negative transformation is utilized to generate a three-phase sinusoidal voltage under imbalanced load condition. Operation modes of a standalone microgrid are divided into three modes, namely, normal, charge, and manual modes. To verify the standalone microgrid along with the proposed control methods, a demonstration site is constructed, which contains 115 kWh lead-acid battery bank, 50 kVA three-phase DC - AC inverter, and 50 kVA DG and controllable loads. In the CVCF control, the total harmonic distortion of output voltage is improved to 1.1% under imbalanced load. This work verifies that the standalone microgrid provides high-quality voltage, and three operation modes are performed from the experimental results.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.52-58
• /
• 2012

Hydrogen-delayed fracture (HDF) was analyzed from the deposited weld metals of 600-MPa and 800-MPa flux-cored arc (FCA) welding wires, and then from the diffusible hydrogen behavior of the weld zone. Two types of deposited weld metal, that is, rutile weld metal and alkali weld metal, were used for each strength level. Constant loading test (CLT) and thermal desorption spectrometry (TDS) analysis were conducted on the hydrogen pre-charged specimens electrochemically for 72 h. The effects of microstructures such as acicular ferrite, grain-boundary ferrite, and low-temperature-transformation phase on the time-to-failure and amount of diffusible hydrogen were analyzed. The fracture time for hydrogen-purged specimens in the constant loading tests decreased as the grain size of acicular ferrite decreased. The major trapping site for diffusible hydrogen was the grain boundary, as determined by calculating the activation energies for hydrogen detrapping. As the strength was increased and alkali weld metal was used, the resistance to HDF decreased.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1193-1201
• /
• 2018

Dilatometry is a useful technique to obtain experimental data concerning transformation. In this paper, a dilation conversional model was established to calculate carbides fraction in AISI H13 hot-work tool steel based on the measured length changes. After carbides precipitation, the alloy contents in the matrix changed. In the usual models, the content of carbon atoms after precipitation is considered as the only element that affects the lattice constant and the content of the alloy elements such as Cr, Mo, Mn, V are often ignored. In the model introduced in this paper, the alloying elements (Cr, Mo, Mn, V) changes caused by carbides precipitation are incorporated. The carbides were identified using scanning electron microscope and transmission electron microscope. The relationship between lattice constant of carbides and temperature are measured by high-temperature X-ray diffraction. The results indicate that the carbides observed in all specimens cooled at different rates are V-rich MC and Cr-rich $M_{23}C_6$, and most of them are V-rich MC, only very few are Cr-rich $M_{23}C_6$. The model including the effects of substitutional alloying elements shows a good improvement on carbides fraction predictions. In addition, lower cooling rate advances the carbides precipitation for AISI H13 specimens. The results between experiments and mathematical model agree well.

• 대한환경공학회지
• /
• 제32권6호
• /
• pp.547-554
• /
• 2010

본 연구에서는 나노구조의 새로운 망간산화물 입자(즉, 블랙-버네사이트)를 합성하여 물질특성 및 1,4-naphthoquinone (1,4-NPQ)을 대상으로 반응매개체 존재 하에서의 산화-변환반응 효율을 조사하였고, 그 결과를 기존의 McKenzie 방법으로 얻은 망간산화물(즉, 브라운-버네사이트)의 결과와 비교 분석하였다. XRD 분석 결과 합성한 망간산화물 입자의 결정상은 버네사이트(${\delta}-MnO_2$)임을 확인하였으며, SEM 측정결과 입자표면은 섬유상의 구조에 의한 나노크기의 미세기공을 가진 볼모양(ball-like)의 형태를 보였다. 배치실험 결과, 나노구조의 망간산화물에 의한 1,4-NPQ 제거는 유사-1차 반응을 따랐으며 기존 망간산화물과 비교해 BET 비표면적 값이 작음(41.05 vs 19.80 $m^2/g$)에도 불구하고 약 2.3배의 높은 속도 상수값을 보였다. 이러한 결과는 블랙-버네사이트에서의 상대적으로 높은 결정성과 나노구조의 표면 특성에 기인한 것으로 해석되며, 블랙-버네사이트 입자가 퀴논화합물에 대하여 상대적으로 높은 반응성을 보임을 알 수 있다. 반응산물에 대한 HPLC 크로마토그램 분석 결과로부터 블랙 버네사이트 입자에 의한 1,4-NPQ의 제거는 반응 매개체인 catechol 존재 하에서의 상호-결합반응을 통한 중합체 생성을 통해 제거됨을 확인하였다.

• 대한환경공학회지
• /
• 제28권5호
• /
• pp.535-542
• /
• 2006

본 연구에서는 일반 토양 중에 존재하는 망간산화물의 하나인 버네사이트(birnessite)를 이용한 1-naphthol의 산화-공유결합 반응에 의한 제거 특성을 다양한 반응조건(반응시간, 버네사이트 주입량 및 pH 등)에서 회분식 실험을 통하여 조사하였다. 버네사이트에 의한 1-naphthol의 제거효율은 모든 반응조건에서 우수하였으며, 생성되는 반응산물은 1-naphthol의 산화-공유결합 반응에 의한 중합체임을 반응 후 상등액에 대한 UV-vis. 흡광 분석 및 질량분석기를 이용한 분자량 분석을 통해 확인하였다. 버네사이트 첨가량에 따른 1-naphthol의 산화 변환 실험 결과는 유사-일차 반응속도 식을 적용하여 반응 속도 상수, k를 구하였으며, 이 유사-일차 속도상수를 버네사이트의 비표면적으로 표준화하여 도출한 반응속도상수($k_{surf}$)는 $9.31{\times}10^{-4}(L/m^2{\cdot}min)$이었다. 또한, 버네사이트에 의한 1-naphthol의 산화 변환 효율은 수용액의 pH에 영향을 받았으며, pH가 10에서 4로 감소하면서 유사-일차 반응속도 상수는 $0.129min^{-1}$에서 $0.187min^{-1}$로 증가하였다.

• International Journal of Computer Science & Network Security
• /
• 제22권7호
• /
• pp.213-219
• /
• 2022

Building Ukraine as an independent, sovereign state requires the education of a citizen-patriot, able to live and work in a democracy, ensure the unity of Ukraine, feel constant responsibility for themselves, their people, country, seek to make a real contribution to the reform process. Modern modernization of the education system requires the search for new information and communication technologies that can ensure the formation of a citizen with an active civic position, which involves not only students mastering the rights and responsibilities of citizens, convincing them of the feasibility of democratic transformation of society, patriotic qualities and feelings, but also the identification of motivated civic actions. The pandemic and hostilities have led to significant changes in the field of education around the world, they have caused educational problems in Ukraine. At the beginning of the quarantine in the spring of 2020, all educational institutions in the emergency mode switched to distance learning. Intensive use of information and communication technologies in the life of modern society has led to a rethinking of the content of education and training of future professionals: the main role is played not so much by the information itself as the ability to work with it, critically comprehend and produce new knowledge; the main thing is not the amount of information, but its quality; information is needed for further practical application and transformation into knowledge, and the ability to work with information becomes one of the important competencies of the modern specialist in the new transformation of society: from information to the knowledge society. In this context, one of the main forms of training is distance learning, which is able to respond to the challenges of society. The main methodological positions that are taken into account in the construction of the structure and dynamics of the formation of civic responsibility of the individual during the use of information and communication technologies are highlighted. The structure of civil responsibility as a holistic system of information and communication technologies is outlined, which includes three subsystems that characterize the natural, social and systemic qualities of citizenship, interconnected hierarchically and synergistically.The constituent elements of the structural part of the model of civic culture of the individual are analyzed.

• 농촌계획
• /
• 제30권1호
• /
• pp.15-31
• /
• 2024

The study primarily aims to examine the characteristics of the transition from natural landscape to modern agricultural landscape on the Daesan plain in Dong-myeon, Changwon-si, in the lower reaches of the Nakdong River. The periods covered in the transition include the late Joseon Dynasty, the early Japanese colonial period, and the late Japanese colonial period. The study concluded the following: It was found that the Daesan Plain used to function as a hydrophilic landscape before it formed into a rural landscape. This is characterized by the various water resources in the Plain, primarily by the Nakdong River, with its back marsh tributaries, the Junam Reservoir and Jucheon. To achieve its recent form, the Daesan Plain was subjected to human trial and error. Through installation of irrigation facilities such as embankments and sluices, the irregularly-shaped wetlands were transformed into large-scale farmlands while the same irrigation facilities underwent constant renovation to permanently stabilize the rural landscape. These processes of transformation were similarly a product of typical colonial expropriation. During the Japanese colonial period, Japanese capitalists initiated the construction of private farms which led to the national land development policy by the Governor-General of Korea. These landscape changes are indicative of resource capitalism depicted by the expansion of agricultural production value by the application of resource capital to undeveloped natural space for economic viability. As a result, the hierarchical structure was magnified resulting to the exacerbation of community and economic structural imbalances which presents an alternative yet related perspective to the evolution of landscapes during the Japanese colonial period. In addition, considering Daesan Plain's vulnerability to changing weather conditions, natural processes have also been a factor to its landscape transformation. Such occurrences endanger the sustainability of the area as when floods inundate cultivated lands and render them unstable, endangering residents, as well as the harvests. In conclusion, the Daesan Plain originally took the form of a hydrophilic landscape and started significantly evolving into a rural landscape since the Japanese colonial period. Human-induced land development and geophysical processes significantly impacted this transformation which also exemplifies the several ways of how undeveloped natural landscapes turn into mechanized and capitalized rural landscapes by colonial resource capitalism and development policies.