• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.64-65
• /
• 2007

High-efficiency white organic light-emitting diodes (WOLEDs) were fabricated with two emissive layers and exciton blocking layer was sandwiched between two phosphorescent dyes which were, bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III (Flrpic) as blue emission and a newly synthesized red phosphorescent material guest, Bis(5-benzoyl-2-phenylpyridinato-C,N)iridium(III) (acetylacetonate) ((Bzppy)2Ir(III)acac). This exciton blocking layer prevents a triple-triple energy transfer between the two phosphorescent emissive layers with balanced emission of blue and red. The white device showed the Commission Internationale d'Eclairage (CIEx,y) coordinates of (0.34, 0.40) at the maximum luminance of $24100\;cd/m^2$ and maximum luminous efficiency of 22.4 cd/A, respectively.

• 한국진공학회지
• /
• 제22권4호
• /
• pp.198-203
• /
• 2013

에너지 수확은 우리주변에 존재하는 버려지는 에너지를 유용한 전기에너지로 변환하는 기술이다. 마찰전기 소자는 접촉을 통한 정전기를 유도하는 원리로 동력학적 에너지를 전기에너지로 전환하는 소자이다. 본 연구에서는 소프트 식각 기술을 활용하여 제작 단계를 최소화한 마찰전기 에너지 수확소자를 개발하고, 그 전기적 특성을 측정하였다. 마찰전기를 통한 발전은 마이크로패턴을 통해 마이크로 거칠기를 가진 알루미늄 층과 PDMS 층 사이에서 발생한다. 이때 PDMS 층의 마이크로 패턴은 마스크리스 식각을 통해 만들어진 알루미늄 층의 마이크로 패턴을 소프트 식각법으로 바로 본뜨는 방식으로 제작되었다. 본 소자는 2 V와 20 nA의 발전 성능을 나타낸다.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.778-784
• /
• 2012

In comparison with some other light sources, LED has merits such as increased life expectancy, fast response, pollution free, and high energy efficiency. Lately, due to development of LED with high brightness and capacity, LED has widely used in many industrial fields such as automotive, aviation, display, transportation and special lighting applications. Since the high heat generation of LED chips can cause a reduction in lifetime, degradation of luminous efficiency, and variation of color temperature, studies have been carried out on the optimization of LED packaging and heat sinks. In this study, experiments on measuring the heat generation rate of LED and the cooling performance of a heat sink were carried for analyzing the thermal characteristics of LED lighting system in free convection. From the results, dimensionless correlation on the cooling performance of heat sink in natural convection was proposed with Nusselt number and Rayleigh number as a guideline for designing cooling device of LED lightings.

• 문화기술의 융합
• /
• 제5권4호
• /
• pp.361-366
• /
• 2019

환자를 위해 시트를 교환하는 일은 궂은일에 속하며 간호환경을 힘들게 하는 요인 중에 하나이다. 환자를 위한 다양한 기능들을 갖는 많은 침대들이 이미 개발되어 있으나 시트를 자동으로 교환하는 장치는 아직 없다. 본 연구에서는 의료용 침대를 위한 시트 자동 교환 장치를 최초로 개발하고 시험하여 성능을 검증하였다. 개발된 시트 자동 교환 장치는 토크 리미터를 사용하여 장력을 적절히 조절하며 오염된 시트와 새로운 시트를 동시에 교환한다. 설계된 시트 자동 교환 장치는 기 개발된 욕창 예방, 환자 자동 이송 기능을 갖는 다기능 통합 침대에 장착되어 적절히 동작하는 것을 실험을 통해 확인하였다

• 한국태양에너지학회 논문집
• /
• 제30권2호
• /
• pp.87-95
• /
• 2010

This study analyzed the performance of solar chimney system for natural ventilation in underground space. A mathematical model of the solar chimney was proposed in order to predict its performance under varying parameters and Korea climatic condition. Steady state heat transfer equations were set up using a energy balanced equations and solved using a inverse matrix method. Numerical simulation program to analyze system was developed by using MATLAB. As the results, the ventilation performance of the solar chimney was determined by the temperature difference of air channel and inlet, and the temperature difference was influenced by insolation, stack height and distance of air gab. Also the solar chimney system can provide $262.9m^3/h$ of annual average ventilation rate. Because seasonal differences of ventilation rate was calculated within 25%, the solar chimney system can be used for every season in Korea climatic condition. Through this study, performance of solar chimney system for natural ventilation was verified by numerical method. Consequently, the solar chimney system is proved to be effective device for natural ventilation utilizing at all times, and the additional studies should be made through the experimental method for imagineering and commercialization.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.138-143
• /
• 2006

The peculiarity of ice slurry, such as liquidity, high heat transfer rate and easy storage can also find to supercooled type dynamic ice storage system(DISS) which is one of the DISS. However, in order to accomplish continuous ice formation in the system without mechanical moving parts, supercooled aqueous solutionshould be formed stable through cooling heat exchanger and be dissoluted in storage tank. In previous research, the time of ice slurry increased as the pressure of the cooling heat exchanger(PHX) increased. In this study, a cooling experiment of an ethylene glycol 7mass% solution was performed with various inlet temperature of the PHX, which has constant brine inlet temperature of $-7^{\circ}C$. The temperature in the storage tank maintained to freezing point of the solution. At results, the time of ice slurry formation increased as the supercooling degree decreased and the cooling rate increased.

• Safety and Health at Work
• /
• 제10권3호
• /
• pp.327-335
• /
• 2019

Background: There have been some concerns related to manual handling of large items in industry. Manual handling operations of large sheet metal may expose workers to risks related to efficiency as well as occupational safety and health. Large sheet metals are difficult to move and burdensome to lift/transfer, and handling the sharp sheet edges may result in contact stress and/or cut injuries on the workers. Methods: Through observation, interview, and immersive simulation activities, a few problems related to current handling of sheet metals were identified. A sheet metal trolley-lifter was then designed and fabricated to address these issues. A pilot study on the use of the developed trolley-lifter for handling sheet metals was conducted to compare between the new and traditional handling methods. Results: The pilot study of the trolley-lifter showed promising results in terms of improving the cycle time, manpower utilization, and working postures compared with the traditional handling method. Conclusion: The trolley-lifter offers an alternative solution to automation and a mechanized assistive device by providing a simple mechanism to assist the handling of sheet metals effectively and safely.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.21-26
• /
• 2021

Single-layer graphene is grown directly on Ti-buffered SiO2 at 100℃. As a result of the AFM measurement of the Ti buffer layer, the roughness of approximately 0.2 nm has been improved. Moreover, the Raman measurement of graphene grown on it shows that the D/G intensity ratio is extremely small, approximately 0.01, and there are no defects. In addition, the 2D/G intensity ratio had a value of approximately 2.1 for single-layer graphene. The sheet resistance is also 89 Ω/□, demonstrating excellent characteristics. The problem was solved by using graphene and a lift-off patterning method. Low-temperature direct-grown graphene does not deteriorate after the patterning process and can be used for device and micro-patterning research.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권4호
• /
• pp.62-66
• /
• 2020

We fabricated superconducting quantum interference devices (SQUIDs) based on Nb Josephson junctions, and characterized the key parameters of the SQUIDs. The SQUIDs are double relaxation oscillation SQUIDs (DROSs) having larger flux-to-voltage transfer coefficient than the standard DC-SQUIDs. SQUID sensors were fabricated by using Nb junction technology consisted of a DC magnetron sputtering and a conventional photolithography process. In multichannel SQUID systems for whole-head magnetoencephalography measurement with a helmet-type SQUID array, we need about 336 SQUID sensors for each system. In this paper, we fabricated a few hundred SQUID sensors, measured the critical current, flux modulation voltage and decided if each tested SQUID can be used for the multichannel systems. As the criterion for the acceptance of the sensors, we chose the critical current and amplitude of the modulation voltage to be 8 ㎂ and 80 ㎶, respectively. The average critical current of the SQUIDs was 10.58 ㎂. The typical flux noise of the SQUIDs with input coil shorted was 2 μΦ0/√Hz at white region.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권1호
• /
• pp.31-37
• /
• 2021

This study aim of quantitative assessment of Noise Power Spectrum(NPS) and image characteristics of by acquired the optimal image for noise characteristics and quality assurance by using magnetic resonance imaging(MRI). MRI device was (MAGNETOM Vida 3.0T MRI; Siemense healthcare system; Germany) used and the head/neck shim MR receive coil were 20 channels coil and a diameter 200 mm hemisphere phantom. Frequency signal could be acquired the K-space trajectory image and white image for NPS. The T2 image highest quantitatively value for NPS finding of showed the best value of 0.026 based on the T2 frequency of 1.0 mm-1. The NPS acquired of showed that the T1 CE turbo image was 0.077, the T1 CE Conca2 turbo image was 0.056, T1 turbo image was 0.061, and the T1 Conca2 turbo image was 0.066. The assessment of NPS image characteristics of this study were to that could be used efficiently of the MRI and to present the quantitative evaluation methods and image noise characteristics of 3.0T MRI.