• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.597-600
• /
• 2006

The silver gate and source/drain electrodes for an a-Si thin film transistor were fabricated by the selective electroless plating (SELP) process. Relevant physical properties including taper angle, uniformity and resistivity are investigated. The Ag layer was about 150nm to 250nm thick, the resistivity less than $3{\times}10^{-6}$ Ohm-cm and the taper angle 45'-60' and the nonuniformity less than 10% on G2 substrates. The transfer characteristics with the Ag gate, and source/drain electrodes respectively possessed good field effect mobility similar to conventionally fabricated a-Si TFTs. This process provided low resistivity, low cost and ease of processing.

• Carbon letters
• /
• v.1 no.3_4
• /
• pp.133-137
• /
• 2001

Mesoporous activated carbon fiber (ACF) was prepared from phenolic resin containing a small amount (0.1 wt %) of organic nickel complex through carbonization and steam activation. Microporous ACF as reference sample was also prepared from phenolic resin without agent. In both cases of the mesoporous ACFs and the microporous ACFs, the electric double layer capacitance of the nonaqueous electrolyte (0.5 M $TEABF_4$/PC or 1.0 M $LiClO_4$/PC) was not proportional to the BET specific surface area. This is owing to the low permeability of nonaqueous electrolyte or the low mobility of ion in narrow micropores. However, the mesoporous ACF showed higher double layer capacitance than the microporous (normal) ACF. This result suggests that the presence of many mesopores promotes the formation of effective double layer or the transfer of ion in the micropore.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1050-1053
• /
• 2002

In this paper, Amorphous silicon on glass substrate was recrystallized to poly-crystalline silicon by solid phase crystallization (SPC) technology. The active region of thin film transistor (TFT) was fabricated by amorphous silicon. The output and transfer characteristics of thin film transistor with lightly doped drain (LDD) structure was measured and analyzed. As a results, analyzed TFTs reliability with LDD's length by various kinds argument such as sub-threshold swing coefficient, mobility and threshold voltages were evaluated. Stress effects in TFT were able to improve to the characteristics of turn-on current and hot carrier effects by LDD's length variations.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.185-188
• /
• 2002

In this paper, Amorphous silicon on glass substrate was recrytallized to poly-crystalline silicon by solid phase crystallization(SPC) technology The active region of thin film transistor(TFT) was fabricated by amorphous silicon. The output and transfer characteristics of thin film transistor with lightly doped drain(LDD) structure was measured and analyzed. As a results, analyzed TFT's reliability with LDD's length by various kinds argument such as sub-threshold swing coefficient, mobility and threshold voltages were evaluated. Stress effects in TFT were able to improve to the characteristics of turn-on current and hot carrier effects by LDD's length variations

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.124-133
• /
• 1995

A theoretical self-consistent thermoelectric model has been developed for optimal thermal design in the self-signal processing infraed detectors. The model is achived by employing the coupled thermoelectric equation which allows which allows the simultaneous investigation of the termal and electrical aspects of device behavior. The thermal limitation of detectivity and responsivity are determined by the enegy gap, carrier concentration, lifetime, and mobility as a function of the temperature. The calculated results indicate that the detectivity is decreased at bias fields above about 50 V/cm, because the performence is limiting by temperature when the bias voltage reached the level associated with Joule heating. It has been also found that the improvement in the mid-band modulation transfer function(MTF) may be restricted by increasing the bias fields. Further, the important paramerers in the thermal optimization of SPIR detector, such as temperature in the device, ambipolar velocity, element thickness and length, are also considered. The analytical study provides a mathematical basis for optimal design of such a photoconductive IR detector and the agreement between the experimental and theoretical results are seen to be good.

• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.67-70
• /
• 2006

A distributed healthcare monitoring system prototype for clinical and trauma patients was developed, using wireless sensor network node. The proposed system aimed to measure various vital physiological health parameters like ECG and body temperature of patients and elderly persons, and transfer his/her health status wirelessly in Ad-hoc network to remote base station which was connected to doctor's PDA/PC or to a hospital's main Server using wireless sensor node. The system also aims to save the cost of healthcare facility for patients and the operating power of the system because sensor network is deployed widely and the distance from sensor to base station was shorter than in general centralized system. The wireless data communication will follow IEEE 802.15.4 frequency communication with ad-hoc routing thus enabling every motes attached to patients, to form a wireless data network to send data to base-station, providing mobility and convenience to the users in home environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.3-3
• /
• 2011

Graphene has been attracting much attention owing to its fascinating physical properties such as quantum electronic transport, a tunable band gap, extremely high mobility, elasticity, thermal conductivity, mechanical strength and so on. There have been many efforts to utilize these outstanding properties of graphene for macroscopic applications such as transparent conducting films useful for flexible/stretchable electronics. However, the scale and the quality graphene need to be further enhanced for practical applications by developing more efficient synthesis, transfer, and doping methods. In this tutorial, the recent advances in graphene synthesis and applications will be reviewed, and discuss the future directions of graphene research.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.254-255
• /
• 2014

RF magnetron sputtering법으로 증착한 비정질 IGZO 박막과 이를 Active layer로 이용한 TFT의 Transfer 특성에 대한 RF Power의 영향에 대해 연구하였다. Carrier concentration은 Sputtering 공정 중에 산소 분압으로 조절하였다. RF Power가 75에서 150W로 증가할수록 IGZO 박막의 Roughness는 12.2에서 $6.5{\AA}$ 감소하였고 Density는 6.0에서 $6.1g/cm^3$로 증가하였다. 또한, 모든 IGZO 박막은 가시광 영역에서 85% 이상의 투과율을 보였고 Optical band gap은 미세하게 감소하였다. RF Power가 증가할수록 a-IGZO TFT의 Threshold voltage는 0.9에서 7V로 증가하였고, Subthreshold slope은 0.3에서 0.8 V/decade로 증가하였다. 하지만 Mobility는 11에서 $19cm^2/V{\cdot}s$로 증가하였다.

• Fibers and Polymers
• /
• v.3 no.2
• /
• pp.60-67
• /
• 2002

In the present study, the fluorescence behavior ova phenylethynyl-terminated imide (LaRC PETI-5) resin, a bismaleimide (BMI) resin, and various LaRC PETI-5/BMI blends with different blend compositions has been characterized as a function of heat-treatment temperature, using a steady-state fluorescence technique with a front-face illumination method far solid-state films. It is observed that there are distinguishable changes in the spectral shape, size, and position of fluorescence with varying heat-treatment temperature in the pure and blend samples. The result is qualitatively explained in terms of charge transfer complex formation as well as microenvironmental change with local mobility and viscosity occurring in the LaRC PETI-5, BMI, and their blends during the cure process. The result also implies that a steady-state fluorescence technique may be a useful tool to understand the processing conditions of polyimides and their blends in the film form on the basis of their thermo-photophysical responses.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.775-776
• /
• 2006

Ad hoc network does not need any preexisting network infrastructure, and it has been developed as temporal networks in the various fields. Infostation is an efficient system to transfer information which does not have delay sensitive characteristics. In this paper, we propose a disaster emergency management system using sensor attached animals' mobility combined with infostation system. We also analyze the performance of the proposed system. From the performance analysis results, we expect that the proposed system will be very useful to early detect big forest fires which occurs frequently in Korea mountain areas.