• Journal of KSNVE
• /
• v.4 no.4
• /
• pp.443-449
• /
• 1994

In the analysis of circular cylindrical shell's vibration and sound radiation, there are numerical and analytical methods. Numerical methods such as F.E.M and B.E.M, have the limit of frequency range. Analytical method can be applied to the circular cylindrical shell from low frequency to high frequency. In this paper, we use the analytical method for shell, and numerical method, F.D.M, for fluid. We also use the method using transfer matrix and eigenanalysis of transfer matrix which can therefore calculate the rotational d.o.f that is very imkportant in synthesis with inner structure. Inner structure has much effect on the submerged circular cylindrical shell vibration and sound rediation. Results for the immersed circular cylindrical shell vibration and sound radiation are compared with the analytic solutions.

• Structural Engineering and Mechanics
• /
• v.40 no.2
• /
• pp.279-295
• /
• 2011

A solution of space curved bars with generalized Winkler soil found by means of Transfer Matrix Method is presented. Distributed, concentrated loads and imposed strains are applied to the beam as well as rigid or elastic boundaries are considered at the ends. The proposed approach gives the analytical and numerical exact solution for circular beams and rings, loaded in the plane or perpendicular to it. A well-approximated solution can be found for general space curved bars with complex geometry. Elastic foundation is characterized by six parameters of stiffness in different directions: three for rectilinear springs and three for rotational springs. The beam has axial, shear, bending and torsional stiffness. Numerical examples are given in order to solve practical cases of straight and curved foundations. The presented method can be applied to a wide range of problems, including the study of tanks, shells and complex foundation systems. The particular case of box girder distortion can also be studied through the beam on elastic foundation (BEF) analogy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.187-195
• /
• 1996

The purpose of this paper is to provide an algorithm in which the procedure of constructing a superstate transition matrix for trellis codes is reduced and, as a result, make it easier to evaluate the performance of a TCM scheme when the generalized transfer function method is used. In this paper, an algorithm for constructing a superstate transition matrix and an algorithm for reducing the matrix easily are addressed and applied to an MTCM scheme as an example. It is shown that the algorithm is very useflul for trellis codes with a large number of states and/or parallel transitions.

• Journal of Embryo Transfer
• /
• v.16 no.1
• /
• pp.61-68
• /
• 2001

Sperm competent for fertilization can become capacitated, bind to the zona pellucida (ZP) of an egg in a specific manner, and complete acrosomal exocytosis. Failure to carry out these functions results in infertility. Although the interactions between the ZP and the plasma mem-brane overlying the sperm acrosome have been considered important for sperm-egg recognition and signalling, recent results have prompted a reassessment of current paradigms concerning these interactions. In this review, we're going to discuss about the roles of the acrosomal matrix, the particulate component of the acrosomal contents, in fertilization. The general hypothesis is that acrosomal exocytosis leads to the exposure of acrosomal matrix proteins that become de-facto extracellular matrix (ECM) on the surface of the sperm head, and that the dynamic interactions of this newly-exposed sperm ECM with the egg ECM (the ZP) govern sperm-egg recognition and sperm penetration of the ZP Informations from these experiments may provide new ways to address the poor ZP binding of sperm from some human infertility patients and may offer new avenues for contraception through the disruption of purposeful sperm-ZP binding.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.223-226
• /
• 2006

This letter presents a new approach to synthesize the resonator filters of an arbitrary topology. This method employs an optimization method based on the relation between the polynomial coefficients of the transfer function and those of the $S_{21}$ from the coupling matrix. Therefore, this new method can also be applied to self-equalized filters that were not considered in the conventional optimization methods. Two microwave filters, a symmetric 4-pole filter with four transmission zeros (TZs) and an asymmetric 8-pole filter with seven TZs, are synthesized using the present method for validation. Excellent agreement between the response of the transfer function and that of the synthesized $S_{21}$ from the coupling matrix is shown.

• Transactions of Materials Processing
• /
• v.3 no.4
• /
• pp.427-439
• /
• 1994

The high temperature deformation behavior of $SiC_p/Al-Si$ composites and Al-Si matrix was studied by hot torsion test in a range of temperature from $270^{\circ}C$ to $520^{\circ}C$ and at strain rate range of $1.2{\times}10_{-3}~2.16{\times}10_{-1}/sec$. The hot restoration mechanisms for both matrix and composites were found to be dynamic recrystallization(DRX) from the investigation of flow curves and microstructural evolutions. The Si precipitates and SiC particles promoted DRX, and the peak strain$({\varepsilon}_p)$ of the composites was smaller than that of the matrix. Flow stresses of $SiC_p/Al-Si$ composites were found to be generally higher than the matrix, but the difference was quite small at higher temperature due to the decrease of capability of load transfer by SiC particles. With increasing temperature, failure strain of matrix and composites are inclined to increase, the increasing value of failure strain for the $SiC_p/Al-Si$ composites was small compared to that of matrix. The stress dependence of both materials on strain rate() and temperature(T) was examined by hyperbolic sine law, $\.{\varepsilon}=A_1[sinh({\alpha}{\cdot}{\sigma})]_n$exp(-Q/RT)

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.5
• /
• pp.68-77
• /
• 1994

The authors apply the transfer influence coefficient method to the 3-dimensional vibration analysis of beam with multi-joints and formulate a general algorithm to analysis the longitudinal, flexural and torsional coupled free vibration. In this paper, the structure, which is mainly founded in the robot arms, cranes and so on, has some crooked parts, subsystems and joints but has no closed loop in this system. It is modeled as the beam of a distributed mass system with massless translational, rotational and torsional springs in each node, and joint elements of release or roll at which node the displacement vector is discontinuous. The superiorty of the present method to the transfer matrix method in the computation accuracy was confirmed by the numerical computation results. Moreover, we confirmed that boundary and intermediate conditions could ve controlled by varying the values o the spring constants.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.3
• /
• pp.256-266
• /
• 1997

The authors apply the transfer influence coefficient method to the 3. dimensional vibration analysis of beam with multi - joints and formulate a general algorithm to analyse the longitudinal, flexural and torsional coupled forced vibration. In this paper, a structure which is mainly found in the robot arms, cranes and so on, has some crooked parts, subsystems and joints, but has no closed loop in this system. It is modeled as the beam of a distributed mass system with massless translational, rotational and torsional springs in each node, and joint elements of release or roll at node which the displacement vector is discontinuous. The superiority of the present method to the transfer matrix method in the computation accuracy was confirmed from the numerical computation results. Moreover, we confirmed that boundary and intermediate conditions could be controlled by varying the values of the spring constants.

• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.481-491
• /
• 1996

In this paper, we formulated algorithm for free vibration analysis of cylindrical shells with stiffeners by applying the transfer influence coefficient method. This was developed as a vibration analysis method suitable for using personal computer(PC). The simple computational results form PC demonstrated the validity of the present algorithm, that is, the computational high accuracy and speed, and the flexibility of programming. We compared with results of the transfer matrix method and the reference. We also confirmed that the present algorithm could provide the solutions of high accuracy for system with a lots of intermediate rigid supports and stiffeners. And all boundary conditions and the intermediate stiff supports between shell and foundation could be treated only by adequately varying the values of the spring constants.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.1
• /
• pp.108-115
• /
• 2002

This paper suggests a new analysis algorithm for the time historical response of three dimensional rectilinear structure which is frequently found in a pipe line system of plant by the combination of the transfer stiffness coefficient method(TSCM) and the Newmark method. The present analysis algorithm for a time historical response can improve the computational accuracy and time remarkably owing to advantages of the TSCM in comparison with transfer matrix method(TMM). The structural system is modeled as a lumped mass system in this method. The analysis algorithm was formulated far the three dimensional rectilinear structure. We confirmed the validity of the present algorithm by comparing the numerical computation results of TSCM with those of TMM.