• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.794-797
• /
• 2005

The automatic load transfer switch (ALTS), a kind of electric power switch, typically automatically transfers electrical loads from a normal electrical power source to an emergency electrical power source upon reduction or loss of normal power source voltage. It can also automatically re-transfer the load to the normal power source when the normal voltage has been restored within acceptable limits. The transfer operation of ALTS is accomplished by a spring-driven linkage mechanism. In order to control or delay the transfer switching time, the ALTS studied in this paper uses the superposed leaf springs, which are subjected to impact leadings in contacting with electrical contacts. Therefore, to confirm whether the springs has enough mechanical endurance in ALTS, we build a finite element model of the superposed lear springs using LS-DYNA and perform the impact and fatigue analysis.

• Journal of Korea Multimedia Society
• /
• v.2 no.3
• /
• pp.339-346
• /
• 1999

When a multicast video conference system utilizes RTP (Real Time Protocol) and RTCP (Real Time Control Protocol), the loss rate and the synchronization of transfer in RTCP affect the scalability of the system. The random delay technique introduced to resolve the problems is so simple that leads the network to meet some congestion in synchronizing feedback information when lots of people transfer the feedback information simultaneously, which reduces the scalability of system. In this paper, we propose a new feedback control algorithm that provides priority levels with the RTCP packet, which cuts down the feedback delay and increases the scalability. The criteria of providing priority Based on the decided priority level, Agent forced the session participants to provide much more RTCP packets, positively controlled, and the possible bandwidth can be measured. The simulation on this technique decreases the delay, and the feedback messages are equally distributed on a given time period.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.274-280
• /
• 2000

The fact that error probability is higher in wireless communication environment than the one in a fixed network makes it inappropriate to apply the same DLC (Data Link Control) protocol used in a wireline network to a wireless network. And since the existing DLC protocol for wireless network was optimized for low-rate data service, it is not suitable for a wireless network environment which should support high-speed and multimedia traffic. Therefore it is desperate to have a new DLC protocol for todays wireless mobile communication environment. In this paper, we propose an error control scheme in WATM (Wireless Asynchronous Transfer Mode) environment. which supportsmultiple traffic attributes, high-speed, multimedia data service. In this paper we modified the existing ASR ARQ (Adaptive Selective Repeat Automatic Repeat Request) protocol where cells exceeding maximum allowable delay range are discarded. And adding FEC (Forward Error Correction) for delay-sensitive traffic resulted in smaller increase of transmission delay.

• The Journal of the Korea Contents Association
• /
• v.8 no.8
• /
• pp.57-64
• /
• 2008

In this paper, to resolve the problem caused by a network state information inaccuracy the slow delay time that conclusion of network state of one way delay time which accuracy delay time information, according to network state changes on the based TFRC flow control, and suggest that flow control mechanism to adjust transfer rate fit of real time multimedia data. In simulation, to measure of netowork state information that on the average about 12% difference of compared RTT and $OWD{\times}2$. When used RTT, used fair bandwidth TFRC much better than TCP about 32%, when used OWD, difference about 3% used fair bandwidth. Thus, conclusion of accuracy network state that used fair bandwidth according to network state changes on the based TFRC, users can support service of high quality that flow control mechanism to adjust transfer rate fit of real time data.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.9-15
• /
• 2014

In these days, along with the extreme popularity of online social network services, it becomes an important problem understanding the role of social network in the research of message dissemination. Past studies of message dissemination over online social network services mostly consider the coverage of message dissemination and the methods to maximize it. But, these works lack of the consideration of the impact of multi channel social network, which has multiple communication channel with distinct properties of message transfer and various users with distinct channel preferences. In this paper, the new message dissemination model over multi-modal multi-channel social network, the Delay Weighted Independent Cascade Model, is proposed. The proposed model considers various channels including online social network service, email, SMS messaging, phone and mouth-to-mouth and their distinct message transfer properties. In order to consider the various user properties, the different value of probability of forwarding a message and the different preference of communication channel is considered. Moreover, the proposed model considers the distribution of user location and allows to analyze the properties of message dissemination under various scenarios. Based on the proposed model, a message dissemination simulator is generated and the message disseminations on various scenarios are analyzed.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.111-120
• /
• 2001

VC merging involves distinguishing cells from an identical merged VC label. Various approaches have been proposed to help this identification process. However, most of them incur additional buffering, protocol overhead and/or variable delay. They make the provision of QoS difficult to achieve. So it was proposed a merge capable scheduler to support VC-merging (VCMS). However, in situations where all VCs are to be merged or the incoming traffic load is very low, it could happen that there are not enough non-merging cells to snoop. In this situation the scheduler uses special control cells to fill the empty time slots out. Too many control cells can cause high cell loss ratio and an additional packet transfer delay. To overcome the drawbacks, we propose a Sequence Skipping(SS) method where the sequencers skip the empty queues and insert SS cells. We show SS method is suitable for VC-merging and can reduce the cell loss ratio and the mean packet transfer delay through simulations.

• Korean Journal of Optics and Photonics
• /
• v.33 no.3
• /
• pp.106-112
• /
• 2022

A two-dimensional optical code division multiple access (OCDMA) encoder/decoder, which is composed of add/drop filters and all-pass filters for delay operation, is proposed. An example design is presented, and its feasibility is illustrated through numerical simulations. The chip area of the proposed OCDMA encoder/decoder could be about one-third that of a previous OCDMA device employing delay waveguides. Its performance is numerically investigated using the transfer-matrix method combined with the fast Fourier transform. The autocorrelation peak level over the maximum cross-correlation level for incorrect wavelength hopping and spectral phase code combinations is greater than 3 at the center of the correctly decoded pulse, which assures a bit error rate lower than 10^-3, corresponding to the forward error-correction limit.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.89-96
• /
• 2016

In this paper, we study mobile data collector (MDC) based data-gathering schemes in wireless sensor networks. In Such networks, MDCs are used to collect data from the environment and transfer them to the sink. The majority of existing data-gathering schemes suffer from high data-gathering latency because they use only a single MDC. Although some schemes use multiple MDCs, they focus on maximizing network lifetime rather than minimizing packet delay. In order to address the limitations of existing schemes, this paper focuses on minimizing packet delay for given number of MDCs and minimizing the number of MDCs for a given delay bound of packets. To achieve the minimum packet delay and minimum number of MDCs, two optimization problems are formulated, and traveling distance and traveling time of MDCs are estimated. The interior-point algorithm is used to obtain the optimal solution for each optimization problem. Numerical results and analysis are presented to validate the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1481-1489
• /
• 2016

A art from the typical data services based on 1:1 data communications, various new services based on 1:N communications have recently appeared. These services are becoming to require advanced 1:N communication schemes which can transfer the same data to many receivers efficiently and in high-performance. Especially, a Push-To-Talk (PTT) service, which is an important service in public safety communication system, requires a service server to disseminate the same voice media data to multiple receivers in a group in real-time and low latency. In this paper, we propose an efficient scheme to disseminate the same data to multiple receivers in low latency. In addition, we provide an analysis which gives a guide the performance of the 1:N communications in practical wired/wireless system environments in the perspective of the PTT service index.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.60-64
• /
• 2007

Increasing using multimedia services as VoIP, Video conference, DMB, IPTV, etc, it is necessary to increase network traffics and develop the mechanism about a flow control for real time traffic transmission. In order to transfer realtime multimedia data, the transfer rate can be control on network state data measuring packet losses of a receiver and delay time of packets through getting periodical feedback RTP/RTCP packet. This paper describes using efficiant flow control on multicast that can reduce errors according to getting feedback tranfer delay and proposes the mechanism that can adapt dynamic change of network. In simulation, the transfer rate can efficiently be control on dynamic change of network and it makes the maximum of the use of a bandwidth and the minimum of packet losses.