• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.221-224
• /
• 1998

Software release over the network is the most efficacious way of software update. Software release of electronic switching system, considering its environments, is the typical case that is in need of adopting the method. The media of transferring software and data of TDX-10A electronic switching system are magnetic tapes containing them, so the MT must be delivered between remotely placed office and package generation system. SMART-10A system provides the file tranfer on the data network between TDX-10A and the package generation system and ability of remote application of new software. This paper shows the implementation of file transfer between TDX-10A and computer system connected by data networks, status handling for duplicated system, and monitor process design with IPC on UNIX system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.3
• /
• pp.244-250
• /
• 1981

The rediant heat tranfer and temperature distribution between infinite parallel gray plates at different temperatures separated by an absorbing and emitting gray gas with or without a sinusoidal heat source in the gas are analyzed by Monte Carlo method. The Monte Carlo result were compared with the numerical solution by Usiskin and Sparrow and the exact solution by Hottel in the case of similar problem limited black walls and gas optical thickness is less than two. For gray walls and large optical thichness the results were compared with modified diffusion approximate solution by Deissler.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2624-2633
• /
• 1993

Mass transfer experiment by naphthalene sublimation method has great advantages in measurement of local transfer coefficients in the region of a three dimensional flow or for a model of complex geometry, which is considered to be very difficult with conventional heat transfer measurements. Mass transfer data obtained by naphthalene sublimation technique are converted to the heat transfer data through heat/mass transfer analogy. This analogy is valid for a simple or laminar flow, but new insight is needed when applying to a turbulent flow or complex flow such as separation, reattachment and recirculation, The purpose of this research is to investigate how geometries and flow conditions incorporate heat/mass transfer analogy. Mass transfer experiments are performed using naphthalene sublimation technique for a flat plate, a circular cylinder, and rectangular cylinders. And mass transfer data are compared with earlier heat transfer measurements for the same geometries. Usefulness of analogy relation between heat and mass transfer is examined with these results.

• Korean Journal of Animal Reproduction
• /
• v.13 no.2
• /
• pp.63-69
• /
• 1989

Eight-cell mouse embryos equilibrated with vitrification solution(VS3), consisting of glycerol and polyethlene glycol, were plunged directly into liquid nitrogen. The embryos were cryopreserved by vitrification without intra- and extracellular ice formation. After the vitrified embryos were warmed at 4$^{\circ}C$, sucrose dilution procedures were examined and the survival embryos were transferred to recipients after 48h incubation in vitro. The results were obtained as follows. 1. Mouse embryos equilibrated with VS3 were diluted with 1.5m sucrose-HB 1 solution, 0.5M sucrose-HB1 solution for 5min at room temperature, respectively. The proportion of vitrified-warmed embryos developed to blastocyst(85.7%) was as high as that of the embryos diluted with 1.04M sucrose-HB1 solution at 4$^{\circ}C$(85.5%). 2. Normal live youngs were obtained in 53.9%(55/102) of the vitrified-warmed embryos after tranfer to pseudopregnant recipients.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.7-14
• /
• 1986

To predict the fuel clad temperature during the reflooding phase of a LOCA, one may need a knowledge of reflood heat tranfer mechanism in a rod bundle. For this purpose reflooding experiments have been carried out with an electrically heated 3*3 rod bundle. Using the method for the determination of local heat transfer coefficient from the measured wall temperature the parametric effects of coolant flow rate, initial wall temperature, coolant subcooling and heat generation rate on the propagation of rewetting front were investigated. Prediction of the wall temperature histories for these experiments was discussed using REFLUX code with modification of the rewetting temperature correlation. Through this modification, better agreement between experiment and prediction was obtained.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.336-340
• /
• 1998

In this paper, an effective control scheme of a single phase UPS inverter is proposed to have no steady state error of the output voltage and the fast response for the load request. The cosine wave tranfer function is proposed to control the output voltage. This controller clearly removes errors of magnitude and phase both in the steady state. On the other hand, a current controller is proposed to reduce the transient time of the voltage control and to improve the bad distorted factor of the output voltage waveform by the load fluctuation and the presences of nonlinear parameters in the plant. The current controller is designed parallel to the voltage controller and performs separately from it.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.92-98
• /
• 2001

We determined the transfer coefficient through the analysis of three dimensional temperature distribution in comparison with the measured temperature on the piston in the turbocharged diesel engine. And we analyzed the thermal stress and the thermal deformation with that heat transfer coefficient by using finite element method. According to this results, we found that maximum tempetature range of the piston appeared at the upper part of the piston crown and that the heat transfer coefficient of the upper part of the piston is smaller than that of the lower one. It showed that the maximum thermal deformation is shown at the edge of the upper part of piston and that the maximum thermal stress was shown on the lower part of the piston crown. Finally, we defined the method of determination of a piston heat transfer analysis by using measured temperature on the piston and analyzed temperature with finite element method.

• Journal of Families and Better Life
• /
• v.14 no.3
• /
• pp.109-120
• /
• 1996

While theories of portfolio selection have been developed very little is known about how individuals actually go about constructing their asset potfolios. This study investigates empirically the characteristics of household's assets and which factor associated with risky and safe asset amount. Data used in this study consisted of 2,164 households and the statistics employed to analyze the data are univariate procedure Logit analysis and OLS. The results of this study were as follows: Among 2,164 households 505 housholds(23.3%) had risky assets. Average risky asset amount is 8,351,500 won and average safe asset amount is 7,086,900 won. Region education and occupation of household head home ownership transfer and other income and total expenditure had significant effects on either and other income and total expenditure had significant effects on either household having risky asset or safe asset. Financial income transfer and other income and total expenditure had significantly p sitive relation with the risky asset amount. Whereas age and the occupation of household head the sense of economic wellbeing earned financial tranfer and other income and total expenditure had significantly positive relation with safe asset amount.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.193-198
• /
• 1999

According to the spread of Asynchronous Tranfer Mode(ATM) Networks Telecommunication Management Network(TMN) over ATM Networks becomes an important issue. This paper presents with an Performance Analysis and the designs for comparing TCP/IP-Based Internet SNMP(Simple Network Management Protocol) and ITU-T's Distributed CMIP configuration. The experimental results shows that propose method is expected to be effectively used in Distributed Environments such as Internet, ATM. and mobile networks where interoperability and scalability are required.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.6
• /
• pp.651-657
• /
• 2010

Solute transport through a groove is affected by its vortices. Our laboratory and numerical experiments of dye transport through a single axisymmetric groove reveal evidence of enhanced spreading and mixing by the vortex, i.e., a new kind of dispersion called here the vortex dispersion. The uptake and release of contaminants by vortices in porous media is affected by the flow Reynolds number. The larger the flow Reynolds number, the larger is the vortex dispersion, and the larger is the mass-transfer rate between the mobile zone and the vortex. The long known dependence of the mass-transfer rate between the mobile and "immobile" zones in porous media on flow velocity can be explained by the presence of vortices in the "immobile" zone and their uptake and release of contaminants.