• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.602-611
• /
• 2017

In railway systems, the exchange of information between running trains and wayside equipment is a very important role in various applications such as position detection and train control. Track circuits have been used as the medium for information transmission between trains and wayside. However, track circuits must be installed continuously along the track on the ground, resulting in an inevitable increase in installation and maintenance costs. One of the most promising solutions to reduce these costs is to mix continuous information transmission (via wireless communication) and discontinuous information transmission (via transponder). In this study, we designed antennas of railway high-speed transponder readers and tags for wireless power transmission, which can be used to transmit information from ground to high-speed trains with a maximum speed of 400km/h. We also verified system performance through computational simulation and prototyping.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1729-1734
• /
• 2007

Recently, as the feasibility study shows that trans-Korea railway and trans-continental railway are advantageous, interest in high-speed railway system is increasing. Because railway vehicle is environment-friendly and safe compared with airplane and ship, its market-sharing increases gradually. We developed a measurement system for on-line test and evaluation of performances of KHST. The measurement system is composed of software part and hardware part. Perfect interface between multi-users is possible. Nowadays, position data inputs to pulse signal from wheel. Perfect position measurement was limited to slip and slide of vehicle. This measurement makes up for the weak points, Position Detection System using GPS develops. By using the system, Korean High Speed Train is capable of accurate fault position detection.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.431-433
• /
• 1996

In MAGLEV system, the train detection can be achieved by using cross inductive radio lines and antennas, because it is impossible to obtain the short circuit between rail and iron-wheel. In this paper, the experimental results of speed profile which is held on MAGLEV at KIMM are presented. We could obtain the successful experimental results for the speed pulses by the inductive radio lines.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1208-1210
• /
• 2002

This paper proposes a new position detection method for train speed control using the PDOA(Phase Difference of Arrival). This method aims to apply to AGT(Automated Guide way Transit) systems, operated with driverless. So it is absolutely required to range, calculate and decide a train position precisely. This system consists of VRS (Vehicle Radio Set) and WRS(Wayside Radio Set). The VRS transmits a wireless signal to the WRS, the controller calculate a straight line with the PDOA. Next step calculate an exact position using track DB. This paper includes the concept, configuration, analysis and results of this method.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.82-85
• /
• 2002

This paper proposes a new position detection method for train speed control using the PDOA(Phase Difference of Arrival). This method aims to apply to AGT(Automated Guide way Transit) systems, operated with driverless. So it is absolutely required to range, calculate and decide a train position precisely. This system consists of VRS (Vehicle Radio Set) and WRS(Wayside Radio Set). The VRS transmits a wireless signal to the WRS, the controller calculate a straight line with the PDOA. Next step calculate an exact position using track DB. This paper includes the concept, configuration, analysis and results of this method.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1545-1561
• /
• 2008

Among all transportations, railway transports have been promisingly offering excellent energy conservation and travelling time. Inevitably, they become a main role in not only transport goods but also passengers. With leap in development of technology, trains have tremendously enhanced their services in terms of speed, accessibility and comfort. However, the safety and ride quality have become a main issue as the train speed increased. The higher speeds have led the structural dynamics and health must be monitored from time to time to ensure that they are in good condition to provide reliable ride. Among all monitoring systems, the structural health monitoring (SHM) systems are imperative important due to its capability of in-situ monitoring and inherently reduce the maintenance frequencies and the huge associated cost. In this paper, SHM systems and the related non-destructive test and evaluation methods were discussed. The types of damages related to train vehicles as well as the damage hot spots are also included in this paper.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1977-1987
• /
• 2008

In this paper, presented was the research work of finding practical application systems using IT that would be adopted by the next generation high speed train for the safety, convenience, and comfort of the passengers and crew members. Study on the applications using smart sensors and IT brought up 26 feasible application cases. Among them 16 cases were related with IT applications and 10 cases smart sensor applications. After having public hearings and surveys to make the decision more objective and generally acceptable, 7 applications - such as information providing service using personal LCD monitor, alarm service, individual internet access service, automatic and remote air conditioning, wireless visual communication with an attendant, extraordinary sound detection, urgent situation in toilet monitoring - out of those 26 were chosen as the final applications.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.69-74
• /
• 2011

In the curving detection method by using an accelerometer, the ride comfort in the first car is worse than one in the others due to spend the time to calculate the tilting command and drive the tilting mechanism after entering in the curve. In order to enhance the ride comfort in the first car, the preditive curve detection method which predicts the distance from a train to the starting point of curve by using the GPS, Tachometer, Ground balise and position DB for track. In this study, we predicted and evaluated the ride comfort for predictive curve detection method in transient curves according to the shape and dimension of transient curve and the various driving speed. Also, we predicted the improvement of the ride comfort for predictive curve detection method by comparing with the result of the ride comfort for predictive curve detection method and for curve detection method using an accelerometer in the short transient curve.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.695-703
• /
• 2016

The maintenance method for the electrical facility of high speed railway has been evolved from inspection by personnel to the automated way by the detection devices. In particular, the signalling equipment in order to increase the safe and efficient operation of the trains is required to maintain normal operation by periodic maintenance. Because the return current gives the most important effects to the wayside equipment in case of the failures, a method is needed to measure the unbalanced rate of return current on the train at high speed driving. The Hot Box Detector(HBD) device that is installed at track-side has a function to recognize the abnormal axle box by detecting the temperature that occurs in the axle of train passing over its device. In order to implement the measurement equipment for unbalanced rate of return current and axle temperature, the design method is proposed and the experimental test results by test bed are included in the paper.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.10
• /
• pp.41-56
• /
• 2020

For the rapid and accurate warning, the system requires not only the sufficient number of seismometers but also the appropriate detection technique of sensor data. Instead of installing new seismometers, on-board accelerometers of the train could be utilized as alternatives. However, the data from on-board accelerometers includes train vibrations and the response of embankment site by earthquake, which are different from earthquakes measured from the seismometer. This study suggests signal analysis technique to detect earthquake from the on-board accelerometer data. The virtual on-board accelerometer data including the response of embankment site, obtained from site response analysis method, has been constructed. The constructed data has been analyzed using short time Fourier transform (STFT) and wavelet transform (WT). STFT method provides better performance to detect long-period earthquake whereas WT method is more available to detect short-period earthquake.