• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1744-1759
• /
• 2007

This study intended to identify the problems of the railroad which are raised as one of the 21C next-generation but to define the direction for the absence of the national policy and examine the competitiveness of railway transportation which is a Green Network with low environmental destruction and high energy efficiency as the continuable means of transportation for the 21st century with superiority to energy crisis caused by high oil price, conclusion of the Kyoto Protocol for worsened air pollution, and reduced cost of traffic jam.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1859-1860
• /
• 1997

다전극 DFB(distributed feedback) 레이저서, 레이징모드간 비팅을 통하여 초고속으로 자려펄스열을 발생시킬 수 있음을 제안한다. 이러한 자려펄스생성을 수정된 시영역 동적 모델(large signal time-domain dynamic model)을 이용하여 조사하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.35-42
• /
• 2006

This paper presents a brief overview of the concepts, achievements and challenges relating to the use of electronic and computer control for railway vehicles in the aspect of mechatronic design. It can provides the rail vehicles of tomorrow must be more cost effective, energy efficient, and dynamic performance. The main emphasis in this paper will be upon the use of active control for suspension and steering for new approaches of incorporation of sensors, controllers, and actuators. They can make vehicle designers to take advantages optimizing mechanics and electronics jointly which are not possible with a purely mechanical approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.141-143
• /
• 2008

Due to the demand for high-output motors in the limited space between the wheels in an electric train, self-ventilating traction motors have been used for many years. periodical disassembly maintenance is necessary to remove the small quantities of dust that enter the motor from the open-air ventilation. Reducing this burden, as well as increasing efficiency and reducing noise, would benefit the next generation of moters To address these needs, KRRI is developing a fully enclosed type traction motor, a fully enclosed type traction motor with outer fans, a high-efficiency permanent-magnet synchronous motor and a direct-drive motor(DDM) as traction motors for the next generation of trains.

• Earthquakes and Structures
• /
• 제4권5호
• /
• pp.509-525
• /
• 2013

In this paper, learning capabilities of two types of Arterial Neural Networks, namely hierarchical neural networks and Generalized Regression Neural Network were used in a two-stage approach to develop a method for generating spatial varying accelerograms from acceleration response spectra and a distance parameter in which generated accelerogram is desired. Data collected from closely spaced arrays of seismographs in SMART-1 array were used to train neural networks. The generated accelerograms from the proposed method can be used for multiple support excitations analysis of structures that their supports undergo different motions during an earthquake.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.345-353
• /
• 2008

In this paper, a novel loss minimization of an induction generator in wind energy generation systems is presented. The proposed algorithm is based on the flux level reduction, for which the generator d-axis current reference is estimated using support vector regression (SVR). Wind speed is employed as an input of the SVR and the samples of the generator d-axis current reference are used as output to train the SVR algorithm off-line. Data samples for wind speed and d-axis current are collected for the training process, which plots a relation of input and output. The predicted off-line function and the instantaneous wind speed are then used to determine the d-axis current reference. It is shown that the effect of loss minimization is more significant at low wind speed and the loss reduction is about to 40% at 4[m/s] wind speed. The validity of the proposed scheme has been verified by experimental results.

• ETRI Journal
• /
• 제31권2호
• /
• pp.209-214
• /
• 2009

In this paper, we propose a novel test methodology for the detection of catastrophic and parametric faults present in analog very large scale integration circuits. An automatic test pattern generation algorithm is proposed to generate piece-wise linear (PWL) stimulus using wavelets and a genetic algorithm. The PWL stimulus generated by the test algorithm is used as a test stimulus to the circuit under test. Faults are injected to the circuit under test and the wavelet coefficients obtained from the output response of the circuit. These coefficients are used to train the neural network for fault detection. The proposed method is validated with two IEEE benchmark circuits, namely, an operational amplifier and a state variable filter. This method gives 100% fault coverage for both catastrophic and parametric faults in these circuits.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.17-20
• /
• 2004

This paper presents a modeling and simulation of a grid-connected wind turbine generation system with respect to wind variations and three-phase fault in the system. It describes the modeling of the wind turbine system including the drive train model, induction generator model, and grid-interface model on MATLAB/Simulink. Case studies demonstrate that the pitch angle control is carried out to achieve maximum power extraction for wind speed variations and the duration of a fault on the system influences on the output of the wind turbine generator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.631-637
• /
• 2009

The railway signaling systems operated in Korea are ATS system, ATP system for the low speed line and ATC system for the high speed line. The integrated onboard signaling system for the next-generation high-speed rail is progressed as the need for reducing a driver's load and controlling a train properly with the automatic translation of the onboard signaling system according to a trackside signaling system. In this paper the configuration of the integrated onboard signaling system and the interfaces of the subsystems is presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.351-355
• /
• 2009

There are two types of controller between railway and train. those are the Continuous Message Controller and the Intermittent Message Controller using for KHSR. The conventional Intermittent Message Controller board used a variable resister for setting the phase, but the variable resister affected some environmental facts, such as temperature, humidity, and vibration, etc. And It is requirement of reduction message processing time for speed-up operation in Next-Generation High-Speed Rail. This study suggests how to solve the problem described above. Using FPGA is quite profitable. It's easy to use and maintain, flexible with the New algorithm to fix up the problem.