• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.187-196
• /
• 1999

The increasing interest in the use of Automated Speed Enforcement (ASE) systems in Korea enables to enforce speed violation by National Police Agency. We have analyzed the mechanism of ASE systems on traffic safety throughout Korea. 1 The data collected on a 2km road-section of each 32 ASE stations during one rear period indicate significant safety improvement. The results were (a) a decrease in the total number of accidents of 28%, (b) a decrease in the number of fatalities of 60%. 2. The study also that ASE systems are effective to reduce average speed, speed variance, and short headway. 3. Based on the operational data collected at 15 locations, an aggregate safety prediction model is proposed as a multiple regressions form. The primary operational variables that appear to affect the frequencies of accident are : average speed, speed variance, and the number of vehicles exceeding 30km/h of posted speed limit.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.31-36
• /
• 2013

PURPOSES: This study is to investigate a generated traffic noise when vehicle pass over a transverse rumble strip at toll plaza of highway. METHODS: To investigate traffic noise at toll plaza of highway, Pass-by method which is the most common used for measuring traffic noise was adopted and the traffic noise at toll plaza was measured for 10 min per hour for 11hours(13:00~24:00). RESULTS: The measured traffic noise by pass-by method was changed as function of the transverse rumble strip configuration. Generally, the maximum difference among three noise measurement sections was 7 dB(A). It might be related with traffic speed. Also, the measured traffic noise was strongly generated from a passenger car which was 2 axle. It means that the most of traffic noise on the road is generated at tire/pavement interface of the passenger car. CONCLUSIONS: The traffic noise was strongly related with vehicle speed and transverse rumble strip configuration on the road. For driver safety, the transverse rumble strip is definitely necessary. However, the complaints from residents near highway was increased by traffic noise from transverse rumble strip. Therefore, To satisfy both safety and reduction of traffic noise, the development of configuration of transverse rumble strip is necessary in the further study.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.47-54
• /
• 2006

In order to reduce traffic accidents, many researchers studied a traffic accident model. The Cause of traffic accidents is usually the mis calculation of traffic signals or bad traffic intersection design. Therefore, to analyse the cause of traffic accidents, it takes effort. This paper, it calculates the optimal safe car speed considering intersection conditions and weather conditions. It will recommend calculation of 1/3 in vehicle speed when there are rainy days and snow days. But the problem is that it will always display the same speed limit when whether conditions change. In order to solve these problems, in this paper, it is proposed the calculation of optimal safety speed algorithm uses weather conditions and road conditions. Computer simulations is prove that it computes the traffic speed limit correctly, which proposed considering intelligent traffic accident prediction algorithms.

• Wind and Structures
• /
• v.35 no.4
• /
• pp.269-285
• /
• 2022

The pressure-mitigating effects of a high-speed train passing through a tunnel with a partially reduced cross-section are investigated via the numerical approach. A compressible, three-dimensional RNG k-ε turbulence model and a hybrid mesh strategy are adopted to reproduce that event, which is validated by the moving model test. Three step-like tunnel forms and two additional transitions at the tunnel junction are proposed and their aerodynamic performance is compared and scrutinized with a constant cross-sectional tunnel as the benchmark. The results show that the tunnel step is unrelated to the pressure mitigation effects since the case of a double-step tunnel has no advantage in comparison to a single-step tunnel, but the excavated volume is an essential matter. The pressure peaks are reduced at different levels along with the increase of the excavated earth volume and the peaks are either fitted with power or logarithmic function relationships. In addition, the Arc and Oblique-transitions have very limited gaps, and their pressure curves are identical to each other, whereas the Rec-transition leads to relatively lower pressure peaks in C_Pmax, C_Pmin, and ΔC_P, with 5.2%, 4.0%, and 4.1% relieved compared with Oblique-transition. This study could provide guidance for the design of the novel railway tunnel.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.141-143
• /
• 2019

Vessel Traffic Service (VTS) increases the efficiency of maritime traffic in terms of reducing marine accidents and the efficient use of port facilities. This means that ports and waterways have their own capacities and can be safely adapted to their capacity through proper traffic management of the VTS. Proper traffic management can reduce the number of vessels and unnecessary waiting in ports, which can lead to economic benefits of ups and port terminals. On the other hand, Korean ports and waterways have restrictions on the maximum speed for safety, but there is no restriction on the minimum speed. However, ships that operate at low speeds in ports and waterways may be able to occupy long periods of operational routes, which may impede efficient port operation. Therefore, the purpose of this study is to propose the minimum speed of ship for efficient port and waterway use. To this end, we reviewed the current laws and systems and proposed the appropriate minimum speed in the waterway using the theory of queue.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.4
• /
• pp.285-291
• /
• 2006

A traffic accident is occurred by unbalance of reciprocal action of driver, vehicle and road conditions. To prevent the traffic accident, rapid and perfect road improvement is needed. But most of road improvement plans have insufficient budget. So decision maker has to determine the priority to invest. A model in this study, analyzing the effect of road conditions to the traffic accident, helps to decide the priority in road improvement. This study considered five danger indices ; 1) traffic volume, 2) speed variance, 3) vehicle mixing rate, 4) curved line radius, and 5) difference between design speed and running speed. Danger rate composed by five indices can be a scale of priority of improvement. The model in this study didn't consider all of factors about traffic accident. But this study can propose the methodology for traffic safety policy. For deriving the model, this study used data from highways in Korea and United States. Therefore the model has to apply the highways only.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.149-162
• /
• 2012

PURPOSES : The causes of traffic accidents can be classified into the factors of highway users, vehicles, and driving environments. Traffic accidents result from the deficiency in single or combination of these three factors. The objective of this study is to define the "potentially hazardous sections of highway" in terms of traffic safety considering these three factors. METHODS : The test drivers performed repeated driving on these highway sections. The drivers and passengers recorded the sections on which the driving was uncomfortable, and the speeds on the sections excluding the uncomfortable sections were used for the development of the model. RESULTS : The model is composed of three sub-models for each of the horizontal curve, tangent, and the section where the curve starts/ends. The safe driving behavior coefficients by the horizontal curvature were derived by comparing the maximum operating speeds at which the vehicle may slide or deviate and the speeds at which the drivers feel comfort. The safety speeds on tangent were derived by the length of tangent section considering the driver's desired speeds under the traffic condition on which the drivers hardly influenced by the other vehicles. For the sections where the curve starts/ends, the driving behaviors were classified by the distances between the curves, and the safe acceleration/deceleration speeds were derived on which the drivers enter/exit the curve sections safely. CONCLUSIONS : Safety speed could then be regarded that the model suggested in this study may be useful to define the potentially hazardous highway section and contribute the improvement of highway safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4D
• /
• pp.527-538
• /
• 2011

Currently, the only established criteria is on the location of bus stops on principal roads where uninterrupted flow mainly occurs. There are no clear guidelines on any method to locating bus stops considering the characteristics of bus operation and pedestrians. If the location or exterior of a bus stop is inappropriate, road users including bus drivers and pedestrians will be caused serious dangerous and inconvenience. In this study, the research below was performed in order to propose rational criteria for the location of bus stops integrated with or separated from speed-change lanes at signalized intersections considering smooth traffic flow and the characteristics of bus operation and pedestrians as well as traffic safety : First, the appropriate length of each of the near-side and far-side bus stops was calculated by categorizing bus stops to be constructed into those integrated with speed-change lanes and those separated from speed-change lanes. Secondly, the appropriate length of each of the bus stops divided into near-side bus stops and far-side bus stops and integrated with or separated from speed-change lanes was selected by considering the characteristics of pedestrians. Thirdly, whether the construction locations of bus stops were appropriate or not was determined based on the appropriate length of bus stops integrated with or separated from speed-change lanes, which was calculated and selected by considering traffic flow and the characteristics of pedestrians and considering traffic safety. The method for locating bus stops considering traffic flow, the characteristics of pedestrians, and traffic safety will be able to help suggestion criteria of bus stop and the location of safe and pleasant bus stops.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.107-114
• /
• 2014

The purpose of this study is to explore a correlation model of traffic safety and personality in elderly and non-elderly people. The correlation model is constructed by a factor regression analysis with latent factors and items related to traffic safety consciousness. As a result, it is found that non-elderly people with positive, active, perfectionistic, and unforgiving personality are likely to speed, have a high chance to be involved in traffic accidents, and tend to give low scores to traffic conditions. However, elderly people who are highly educated are likely to give high scores to traffic conditions and do not speed. Instead, elderly people become more likely to be involved in traffic accidents when they are engaged in more social activities. The results could contribute to developing traffic safety education and policy that is better customized to the specific needs of different groups of road users.

• ETRI Journal
• /
• v.40 no.1
• /
• pp.39-50
• /
• 2018

More people prefer using rail traffic for travel or for commuting owing to its convenience and flexibility. The railway scenario has become an important communication scenario in the fifth generation era. The communication system should be designed to support high-data-rate demands with seamless connectivity at a high mobility. In this paper, the channel characteristics are studied and modeled for the railway tunnel scenario with straight and curved route shapes. On the basis of measurements using the "Mobile Hotspot Network" system, a three-dimensional ray tracer (RT) is calibrated and validated for the target scenarios. More channel characteristics are explored via RT simulations at 25.25 GHz with a 500-MHz bandwidth. The key channel parameters are extracted, provided, and incorporated into a 3rd-Generation-Partnership-Project-like stochastic channel generator. The necessary channel information can be practically realized, which can support the link-level and system-level design of the communication system in similar scenarios.