• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.47-56
• /
• 2015

PURPOSES: The purpose of this study is to estimate the impact of variable message signage (VMS) on traffic safety as a function of road curve radius using statistical methods. METHODS: In order to analyze the impact of VMS installations on traffic safety, travel speed, lateral distance, and geometric data relating to road curvature in each study area was acquired and analyzed for the impact of providing VMS information on driver performance and traffic safety using statistical methods including student t-test, Mann-Whitney test, and the Anderson-Darling test for estimating traffic safety hazard zone in each lane. RESULTS: As a result of analyzing driver performance characteristics before and after providing VMS information, it was determined that by providing VMS information, mean travel speed is deceased and vehicles are driven with increased precision, following the centerline in the first and second lanes. Also the results of analyzing traffic safety impacts of VMS indicate that traffic safety performance factors in the first lane of the Gapyeong section can, on average, increase in the left and right side of the lane by 19.22% and 68.98%, respectively, and in the case of the second lane, safety impacts, on average, can increase in both sides by 100%. For the Hongcheon section, traffic safety impacts in the first lane, on average, can increase along the left and right sides of the lane by 32.31% and 47.18%, and within the second lane, traffic safety can be increased along the left and right side of the lane by 10.97% and -0.01%, respectively. CONCLUSIONS: Based on the results of this study, the impact on traffic safety obtained by providing VMS information for road sections with smaller curve radii is greater than can be obtained for road sections with larger curve radii.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.21-32
• /
• 2007

The linear traffic model(Vertical queueing model) that is adopted widely in traffic flow estimation assumes that all vehicles have the identical motion before joining a queue at the stop-line. Thus, a queue is supposed to form vertically not horizontally. Due to the simplicity of this model, the departure time of the leading vehicle is assumed to coincide with the start of effective green time. Thus, the delay estimates given by the Vertical queueing model is not always realistic. This paper explores a microscopic traffic model(a Kinematic Car-following model at Signalised intersections: a KCS traffic model) based on the one dimensional Kinematic equations in physics. A comparative evaluation in delay and sensitivity of delay difference between the KCS traffic model and the previously known Vertical queueing model is presented. The results show that the delay estimate in the Vertical queueing model is always greater than or equal to the KCS traffic model; however, the sensitivity of delay in the KCS traffic model is greater than the Vertical queueing model.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.113-122
• /
• 1999

Congestion and traffic accidents occur on the merge and diverge sections in the interchange of the freeway. Studies have been conducted to reduce the traffic delay and accidents on the merge section in the freeway since 1960s. but a study was not conducted to estimate the speed variation on the merge section construct models estimated for the speed variation and suggest the appropriate measures. The purpose of this study was to identify the traffic flow characteristics on the merge section in the freeway construct the models estimated for the speed variation on the merge section in the freeway and finally establish the appropriate measure for reduction of traffic delay and accidents on the merge section in the freeway. The following results were obtained: I) Speed variations in the urban freeway appeared to be about 3.2mph, 6.5mph and 7.4mph based on the morning peak period, afternoon peak period and 24-hours period but those in the suburban freeway appeared to be about 8.0mph, 11.1mph and 10.1mph based on the same periods respectively. So different speed reduction signs need be installed to reduce delay and accidents on the merge section in the freeway based on the areas and periods as the freeway traffic management system(FTMS). ii) These models estimated for speed variation need to be studied with the changeable message sign(CMS) technique based on the real-time data so that the traffic flow could be maximized and the traffic delay and accidents be on the merge section in the freeway as more efficient freeway traffic management system(FTMS) in the near future.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.91-98
• /
• 2015

PURPOSES : Although signalized intersections have been considered the best way to control traffic volume in urban areas for several decades, roundabouts are currently being discussed as an alternative way to control traffic volume, especially when traffic is light. Because a roundabout's efficiency depends on the load geometry as well as the traffic volume, design guidelines for roundabouts are recommended only if the incoming traffic volume is very low. It is rare to substitute a roundabout for an existing signalized intersection in urban areas. This study aims to estimate the benefits from the transformation of an existing signalized intersection into a roundabout in an urban area. When there is a more moderate volume of traffic, roundabouts can be effectively used by optimizing signals located at an approaching roadway. METHODS : The methodologies of this paper are as follows: First, a signalized intersection was analyzed to determine the traffic characteristics. Second, the signalized intersection was transformed into a roundabout using VISSIM microscopic traffic simulation. Then, we estimated and analyzed the effects and the performance of the roundabout. In addition, we adjusted a method to improve the benefits of the transformation via the optimization of signals located at an approaching road to control the incoming traffic volume. RESULTS : The results of this research are as follows: The signal-optimized roundabout improved delays compared with the signalized intersection during the morning peak hour, non-peak hour, and evening peak hour by 1.78%, 12.45%, and 12.72%, respectively. CONCLUSIONS : According to the simulation results of each scenarios, the signal-optimized roundabout had less delay time than the signalized intersection. If optimized signal control algorithms are installed in roundabouts in the future, this will lead to more efficient traffic management.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.57-66
• /
• 2004

When we estimate an origin-destination matrix from traffic counts. origin-destination matrix estimation from traffic counts according to the selected optimal traffic counting links is method for improving the results of origin-destinaation matrix estimation and for increasing economic efficiency. This paper proposed model of selecting traffic counting links using integer program technique, and selected a traffic counting links using this model, and estimated and origin-destingtion matrix from traffic counts according to the selected optimal traffic counting links. Also, we compared a result of estimating origin-destination matrix from the selected optimal traffic counting links using this model to a result of estimating origin-destination matrix from the randomly selected traffic counting links. The error analysis result was more improved a result of origin-destination matrix estimation using this model than a result of randomly selected links.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.7
• /
• pp.26-40
• /
• 2010

We propose a new routing protocol, MCQosR, that is based on bandwidth estimation, admission control, and a routing metric, MCCR - suitable for wireless ad-hoc networks with multiple radios and channels. To use the full capacity of a wireless link, we assume a node with multiple radios for full duplex operation, and a radio using multiple channels to exclude route-intra interference. This makes it possible to use the capacity of a wireless link. Then, to provide bandwidth and delay guarantee, we have a radio with a fixed channel for layer-3 data reception at each node, used to estimate the available bandwidth and expected delay of a wireless link. Based on the estimate of available bandwidth and delay, we apply the call admission control to a new call requiring bandwidth and delay guarantee. New calls with traffic that will overflow link or network capacity are rejected so the accepted calls can use the required bandwidth and delay. Finally, we propose a routing metric, MCCR, which considers the channel contentions and collisions of a wireless link operating in CSMA/CA. MCCR is useful for finding a route with less traffic and distributing traffic over the network to prevent network congestion as much as possible. The simulation of the MCQosR protocol and the MCCR metric shows traffic is distributed and guaranteed service is provided for accepted calls.

• Journal of Environmental Science International
• /
• v.18 no.7
• /
• pp.747-754
• /
• 2009

In this study, which aims to estimate the volume of greenhouse gas emitted by road transportation vehicles in Changwon City, the emission rate was calculated on the basis of the actual traffic volume measured at major crossroads and compared with the results obtained from the methodology used to estimate the greenhouse gas emissions of road transportation provided in the IPCC 2006 GL guidelines (Tier 1, Tier 3). Analysis of the results of the comparison showed that the Tier 1 methodology, which was applied in the estimation of the rate of greenhouse gas emissions, carries a high probability of underestimation, while the Tier 3 methodology carries a relatively high probability of overestimation. Therefore, when considering the assignment of permissible rates of emission to local governments, the application of the methodology, i.e. whether one uses Tier 1 or Tier 3, may result in a large difference in the rate of allowable emissions. It is suggested that a method based on the actual volume of traffic would be the most reasonable one with regard to the development of a realistic plan.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.14-22
• /
• 2011

This study is to estimate delay time model of signalized intersection by using travel data of Bus Information System. BIS, which applies the advanced information technology to an existing bus system, has been developing and operating in many cities. However, even though some useful traffic informations have been collected from BIS operation, utilization of real-time data to the traffic operation has not been promoted due to the inhomogeneity of modal speeds. Accordingly, in this study, a fundamental research is performed for traffic controls in urban areas and providing a traffic information throughout a methodology for estimating delay time using the data from BIS was developed. This delay time model setting bus travel time excluding service time of a bus stop as explanatory variables was constructed as a regression model, and the coefficient of determination of a linear regression model most highly appeared as 0.826. As a result of performing T-test with field survey values and model estimation values for verifying constructed models statistically, it was analyzed to be statistically significant in a confidence level of 95%.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.31-41
• /
• 2006

The main purpose of this paper is to develop the practical method to estimate the congestion price in odor to overcome the difficulty of traditional microeconomics approach for demand and cost function concepts. In this paper, we estimate the theoretical congestion toll which reflecting the real traffic conditions such as a speed-density functions using a traffic engineering methods We calculates the optimal congestion toll based on the real traffic conditions assuming that the electronic road pricing (ERP) systems ave installed for the study road. After evaluating the various speed-density relationship methods. we found that the Drake model is best suited for the Gangbyeon Expressway Using the Drake model, the optimal congestion toll will be 94 to 3,255 Won for the traffic speed between 44km/h to 68 km/h based on wage rate method and 107 to 6,381 Won for the marginal substitution method for the Gangbyeon Expressway in city of Seoul, Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.155-162
• /
• 2008

This study shows how to estimate the design hour factor when the counting stations don't have all of the hourly volumes such as in a coverage survey. A coverage survey records traffic volume from 1 to 5 times in a year so it lacks the detailed information to calculate the design hour factor. This study used the traffic volumes of permanent surveys to estimate the design hour factor in coverage surveys using correlation and regression analysis. A total 7 independent variables are used : the coefficient of variance of hourly volume, standard deviation of hourly volume, peak hour volume, AADT, heavy traffic volume proprotion, day time traffic volume proportion and D factor. All of variables are plotted on a curve, so it must use non-linear regression to analyze the data. As a result the coefficient of determination and MAE are good at logarith model using AADT.