• 무역학회지
• /
• 제42권3호
• /
• pp.25-47
• /
• 2017

금융기관이 수출기업에게 수출채권을 상환청구불능 조건으로 매입하여 수출금융을 지원하는 금융기법이 포페이팅이다. 2011년도 이후 한국채택 회계기준(K-IFRS)의 도입으로, 기존의 일반 네고를 단순 차입금으로 계상하게 함으로써 부채비율을 높여 기업의 재무건전성을 악화시키는 요인이 되어, 수출기업들이 차입금을 낮추기 위한 방법으로 장부제거(book-off)가 가능한 포페이팅에 대한 관심이 증대되게 되었다. 국제상업회의소에서의 포페이팅통일규칙 제정시행과 함께 수출기업들의 포페이팅에 대한 관심 증대에 발맞춰, 국내 각 외국환은행들도 포페이팅 관련 상품의 개발로 취급범위를 확대해가고 있는 시점에서, 국내 외국환은행 전체를 대상으로 설문조사를 실시하여, 포페이팅 취급실태를 파악하여 그 문제점과 개선점을 찾고자 하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.1-6
• /
• 2006

Hot carrier degradation and roll off characteristics of threshold voltage ($V_{t1}$) on NMOSFETs as I/O transistor are studied as a function of Lightly Doped Drain (LDD) structures. Pocket dose and the combination of Phosphorus (P) and Arsenic (As) dose are applied to control $V_{t1}$ roll off down to the $10\%$ gate length margin. It was seen that the relationship between $V_{t1}$ roll off characteristic and substrate current depends on P dopant dose. For the first time, we found that the n-p-n transistor triggering voltage ($V_{t1}$) depends on drain current, and both $I_{t2}$ and snapback holding voltage ($V_{sp}$) depend on the substrate current by characterization with a transmission line pulse generator. Also it was found that the improved lifetime for hot carrier stress could be obtained by controlling the P dose as loosing the $V_{t1}$ roll off margin. This study suggests that the trade-off characteristic between gate length margin and channel hot carrier (CHC) lifetime in NMOSFETs should be determined by considering Electrostatic Discharge (ESD) characteristic.

• Journal of information and communication convergence engineering
• /
• 제5권2호
• /
• pp.131-135
• /
• 2007

In this paper, The proposed algorithm consists of three steps. In the first step, TD(Transition Density) calculation has to be performed. a CLB-based CPLD low-power technology mapping algorithm considered a Trade-off is proposed. To perform low-power technology mapping for CPLDs, a given Boolean network has to be represented in a DAG. Total power consumption is obtained by calculating the switching activity of each node in a DAG. In the second step, the feasible clusters are generated by considering the following conditions: the number of inputs and outputs, the number of OR terms for CLB within a CPLD. The common node cluster merging method, the node separation method, and the node duplication method are used to produce the feasible clusters. In the final step, low-power technology mapping based on the CLBs packs the feasible clusters. The proposed algorithm is examined using SIS benchmarks. When the number of OR terms is five, the experiment results show that power consumption is reduced by 30.73% compared with TEMPLA, and by 17.11 % compared with PLA mapping.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1327-1337
• /
• 2004

An efficient multi-objective optimization method is presented making use of neural network and a systematic satisficing trade-off method (STOM), in order to simultaneously improve both maneuverability and durability of tire. Objective functions are defined as follows: the sidewall-carcass tension distribution for the former performance while the belt-edge strain energy density for the latter. A back-propagation neural network model approximates the objective functions to reduce the total CPU time required for the sensitivity analysis using finite difference scheme. The satisficing trade-off process between the objective functions showing the remarkably conflicting trends each other is systematically carried out according to our aspiration-level adjustment procedure. The optimization procedure presented is illustrated through the optimum design simulation of a representative automobile tire. The assessment of its numerical merit as well as the optimization results is also presented.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.94-100
• /
• 2003

Generally, cable-stayed bridges are both statically indeterminate structure with a high degree of redundancy and flexible structure. So it is very important to ensure precision control during both fabrication and construction. In precision control of cable-stayed bridges, precision control under multi-objective programming method is needed, because precision control problem of cable-stayed bridges is a multi-objective programming problem in which many objective functions are regard as variables. In previous studies, it was regarded as a single-objective problem, so it had many problems in respect of usefulness and rationalness. In this study, precision control under multi-objective programming method is proposed considering economy, efficiency, and safety at best in precision control of cable-stayed bridges. Precision control problem of cable-stayed bridges is formulated with satisfying trade-off method which is a kind of multi-objective programming method, then it is optimized with min-max method. A computer program is presented including above process.

• 한국군사과학기술학회지
• /
• 제23권6호
• /
• pp.582-590
• /
• 2020

This paper presents the results of new error analysis on the veering of marine target with the concept of frequency of occurrence, and shows how to apply the midcourse guidance errors of anti-ship missile. The veering error would be a dominant factor in the midcourse guidance errors with flight time increase. This study suggests the reasonable application method of the veering error based on the characteristics of abnormal error, and describes the tailoring method including trade-off between the midcourse guidance range of veering target and the value of frequency of occurrence on veering error.

• 산업공학
• /
• 제12권3호
• /
• pp.414-423
• /
• 1999

A nuclear power plant requires a huge amount of initial investment and long construction lead time. As we expect that there may exist a relationship between investment and construction lead time, a number of researchers have reported that nearly a half of investments is incurred due to time factors such as the time value of money and inflation or escalation rates. Therefore, we investigated in this paper a relationship between the initial investment and the construction lead time of a nuclear power plant construction, and proposed a method for a trade-off analysis between the annual equivalent worth and the investment alternatives to reduce the construction lead time. Finally, we presented a real case to numerically explain the steps of the method presented in this paper.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1999년도 국제 심포지엄 Proceedings of International Symposium on 친환경농업과 기계화방향
• /
• pp.53-80
• /
• 1999

Productivity and environmental conservation in nowadays trade-off and serious problem in agriculture. Precision farming is developing for solving the trade-off problem using systems approach and variable management. The systems approach is attributed to aiming at information-oriented agriculture, environmental-friendly sustainable agriculture, and complex system optimization . The variable management is composed of describing variability , variable-rate technology and decision support system. Three levels of technology development and three farming strategies are introduced for having a prospect. Describing the variability is the first step to promote it. Precision farming could be available for small scale farming as well as big scale farming. Paddy field precision farming will undergo in its distinctive way.

• 로봇학회논문지
• /
• 제5권1호
• /
• pp.70-76
• /
• 2010

This paper addresses a design issue of "model complexity and performance trade-off" in the application of bandwidth extension (BWE) methods to the intra-frame predictivevector quantization problem of wideband speech. It discusses model-based linear and non-linear prediction methods and presents a comparative study of them in terms of prediction gain. Through experimentation, the general trend of saturation in performance (with the increase in model complexity) is observed. However, specifically, it is also observed that there is no significant difference between HMM and GMM-based BWE functions.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2005년도 한국우주과학회보 제14권2호
• /
• pp.149-152
• /
• 2005

High-resolution telescope from space comprises electro-optical imagery with a ground resolution tying within the range of 1 to 5 meters. According to information documented in the literature up to now, most primary mirrors verified and flown in optical space missions have been lightweighted made from Zerodur, ULE, beryllium, SiC or aluminium. A trade off study was performed to determine as a &lightweighted& by factors like backside cell pattern, rib thickness, face thickness, mirror fixation device location and material and so on based on structural performance for primary mirror in submeter class spaceborne telescope.