• 한국구조물진단유지관리공학회 논문집
• /
• 제20권2호
• /
• pp.110-121
• /
• 2016

구조 형식이나 공법의 선정, 유지보수 시기, 보수방법의 결정 등의 의사 결정에서 수명주기비용(life cycle cost, LCC)의 평가가 중요하다. 철도 궤도구조의 경우 초기시공비 뿐 아니라 유지보수비가 총 비용의 상당 부분을 차지하고, 특히 자갈궤도일수록 그 비율은 더욱 높으므로 수명주기비용 평가의 필요성이 더욱 높다. 이 연구에서는 궤도 구조 형식, 연간 통행량, 축중, 열차 속도, 곡선 비율, 구조물(교량, 터널) 비율 등 다양한 설계변수를 고려할 수 있는 LCC 산정 모델을 개발하고, 각 비용의 산정에 필요한 기초 자료를 제시하였으며 구축된 모델과 자료를 바탕으로 주요 설계변수에 따른 고속철도 자갈궤도와 콘크리트궤도 LCC의 변화 경향을 분석하고, 이로부터 궤도 LCC 분석에 있어서의 고려해야 할 주요 변수를 검토하였다. 검토 결과 자갈궤도는 교체 및 운영 비용의 비중이 콘크리트궤도에 비해 현저히 높았으며, 연간 통행량과 자갈 탬핑 주기가 자갈궤도의 LCC에 가장 큰 영향을 미치는 것으로 나타났다. 반면 콘크리트궤도는 초기 시공비의 비중이 현저히 높았고, 연간 통행량이나 열차속도, 축중 등에 상대적으로 영향을 적게 받는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.75-82
• /
• 2019

아스팔트 콘크리트(AC) 궤도는 열차 하중에 의한 궤도 하부노반의 발생응력을 최소화하고, 적외선에 민감한 AC의 노출면적을 감소시켜 온도 영향에 따른 AC 도상의 소성변형을 줄일 수 있는 슬래브 패널 개발이 매우 중요하다. 본 연구에서는 형상 설계 및 실내성능시험을 통해 AC 궤도용 슬래브 패널을 개발하였으며, KRL-2012 표준열차하중 모델 및 KR-C코드에 의한 다양한 정적 하중조합에 따른 슬래브 패널에 작용하는 휨 인장응력 및 설계모멘트를 유한요소해석을 통해 구조 안전성을 검토하였다. 또한 AC 궤도용 슬래브 패널의 설계 적합성을 검증하기 위하여, EN 13230-2에 의거 슬래브 패널 주요 위치별로 정적 휨 강도 시험, 동적 휨 강도 시험을 수행하였다. 성능 시험 결과, AC 궤도용 슬래브 패널은 균열 하중 및 균열 확대 여부 등 유럽 표준에서 요구되는 성능 기준을 모두 만족하였다.

• 조명전기설비학회논문지
• /
• 제26권10호
• /
• pp.44-51
• /
• 2012

The purpose of this study is development of the diagnosis system to preventative maintenance in the on-board measuring systems for in-cab electric inspection systems of high speed railway. The on-board measuring systems can inspect precisely whether ground signal system operate stably. In this paper, we recognize characteristics of the track circuits and confirm whether the wave of current matches the on-board measuring data through the electric modeling method for high speed railway. it is necessary to develop GUI visual programs that can simulate abnormalities of the on-board measuring data in many ways, and the visual program is designed to diagnosis in the case of track circuit equipment's function decreased in advance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.303-310
• /
• 2011

This paper is focused on development of models for measuring lateral and vertical track irregularities from corresponding accelerometers of an in-service high-speed train. Generally, the track irregularity was measured by a special railway inspection vehicle or system with contact or non-contact sensors. However, the sensors are very expensive and vulnerable to a harsh environment. Displacement estimation from an inertial measurement unit and its wave-band filtering was already developed in the previous study, and it was found that their results included not only the track irregularities but also other information such as phase delay of the applied filters, and suspension and conicity of the wheel. To identify the track irregularities from those results, a compensation filtering method was proposed. Each directional compensation filter was derived by using a system identification method with the estimated directional displacement as input and the corresponding track irregularities as output. In this paper, they are integrated into a model for each direction and applied to the measured lateral and vertical acceleration data from the axle-box and bogie of an in-service high-speed train. Their results are compared with the data from the track geometry measurement system. From the comparison, the proposed models are a useful tool for the measurement of the track irregularities using accelerometers of in-service high-speed trains.

• 문화기술의 융합
• /
• 제8권3호
• /
• pp.239-244
• /
• 2022

본 연구는 현장조사 및 실내시험을 바탕으로 궤도형식별 열화에 영향을 미치는 핵심매개변수를 도출하였다. 기존 궤도 열화모델은 자갈궤도에 국한된 모델로서 콘크리트궤도의 열화평가는 연구된 것이 없는 실정이다. 본 연구에서는 운행선 궤도형식별 다양한 궤도구조의 특성이 반영된 열화요인을 도출하고자 궤도구성품의 성능수준 및 상태평가를 위한 실내시험을 수행하였다. 또한 궤도유지관리 이력데이터에 대한 분석을 통해 궤도열화 및 유지관리에 영향을 미치는 매개변수를 도출하였다. 현장조사, 궤도유지관리 이력데이터 분석 및 현장시료를 이용한 궤도구성품의 성능시험을 통해 궤도성능기반의 궤도열화 매개변수는 궤도침하 및 궤도지지강성에 직접적인 영향을 미칠 수 있는 도상자갈과 방진패드인 것으로 분석되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권3호
• /
• pp.235-244
• /
• 1998

In the design of bridges, the points of concem are the landscape design, the function, safety and economical efficiency. But most of studies have been performed on structural engineering. The study on the landscape design of bridges has not been done in korea. Therefore, in this research, the design method of bridges by the judgement of structural engineering and landscape engineering has been proposed, through the process to decide the shape of bridges. Also, the research studies a problem about the visual safety of the structural shape in the landscape design of bridges. The visual experiments applied to the seven models about the shape of hunch in bridge pier. The experiment was made in moving velocity of view point, steady looking time and track of eyeball movement.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.72-78
• /
• 2020

The accident fatality rate has decreased by more than 90% compared to 2006, due to the safety management and safety investment based on the Rail Safety Act. Most railway safety indicators, including fatality rates, have improved significantly from 60% to 80%, reaching the level of developed countries in terms of most railway safety indicators. However, the only staff fatality rate at work is not improved, and it is 3 to 5 times higher than that of developed countries. Most of the fatality occurred during employee's work recently occurred due to accidents hit by train while track work. In principle, when operating track need to check or maintenance, the operation of the train should be stopped and the work carried out. However, in Korea, due to the highest passenger density and train operating density in the world, it is caused by a structural problem that requires workers to enter the track while the train is running and perform various tasks such as maintenance and inspection. In this study, we analyzed the risk of accidents caused by hit by trains on the track, which is the biggest cause of staff fatality, using the main statistics of the last 10 years. In detail, the scenarios of the main causes of hit by trains and workers were formed to suggest the effectiveness of the current preventive measures and supplementary.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.6043-6062
• /
• 2019

Low-rank matrix decomposition has shown its capability in many applications such as image in-painting, de-noising, background reconstruction and defect detection etc. In this paper, we consider the texture background of rail track images and the sparse foreground of the defects to construct a low-rank matrix decomposition model with block sparsity for defect inspection of rail tracks, which jointly minimizes the nuclear norm and the 2-1 norm. Similar to ADM, an alternative method is proposed in this study to solve the optimization problem. After image decomposition, the defect areas in the resulting low-rank image will form dark stripes that horizontally cross the entire image, indicating the preciselocations of the defects. Finally, a two-stage defect extraction method is proposed to locate the defect areas. The experimental results of the two datasets show that our algorithm achieved better performance compared with other methods.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1378-1387
• /
• 2011

Seoul Metropolitan Rapid Transit Corporation - which is operating the subway lines No. 5, 6, 7 and 8 of Seoul's subway - has been operating a variety of motor cars and rail inspection vehicles to transport workers and materials into the tunnel at night after the daily revenue service for the maintenance of tunnel structure and track. However, the air quality in tunnels has been contaminated due to the operation of diesel engine cars, and rail inspection vehicles are now having higher chances of risks since the lightweight vehicles made with aluminum bogie became too obsolete. In this study, MRT type eco-friendly electric multi-inspection car has been elaborated for the purpose of improvement of tunnel environment and replacement of motor cars and rail inspection vehicles.

• 전자공학회논문지
• /
• 제52권9호
• /
• pp.147-152
• /
• 2015

지금까지의 전차선 검측 시스템은 검측차량을 이용하여 검사구간을 주행 한 후 결과를 산출하였다. 이것은 아열대기후로의 변화에 인한 자연 환경의 급변과 450Km/h급 고속철도 차량의 등장으로 변화가 요구된다. 이에 고속 주행환경과 노반정보를 반영하는 융합 가변형 전차선 검측시스템의 구조를 연구하였다. 기존의 시스템은 전차선에 한정하여 마모의 정도를 판단하였다. 이에 비해 본 논문에서는 검지를 위하여 참조하는 정보를 검측대상의 영상정보에 추가하여 음향정보를 융합하였고, 지형정보에 따라 검지빈도와 정밀도를 가변적으로 적용함으로써 시설물 검측에 대한 기본적인 모델을 제안하였다.