• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.128-133
• /
• 2009

In this paper, an optical touch panel device is newly proposed, with operating principle based on the optical coupling between a pointing pen having a built-in light source and perpendicularly crossed optical waveguide arrays. In order to enable an external light to couple into a waveguide core, the auxiliary pyramidal structures are introduced into all intersecting points located periodically along optical waveguides. The shape is optimized for minimizing the unwanted propagation loss due to the same structure by a ray tracing method. For the optical waveguide with the size of $50{\times}50{\mu}m^2$, the bottom width, height, and slope angle of the optimized pyramidal structure are $50{\mu}m$, $22.5{\mu}m$, and $42^{\circ}$, respectively. The optical coupling efficiency of about 97.8% and the average propagation loss of 0.3 dB/mm were achieved for the optimized touch panel. Finally, it is found from the tolerance analysis that tilting of the pen up to ${\pm}12^{\circ}$ can be allowed.

• Journal of information and communication convergence engineering
• /
• v.9 no.3
• /
• pp.325-330
• /
• 2011

Due to the wide growth and popularity of social network website, large numbers of users discover these social network sites are a place where they can be able to spend their leisure time sharing interests, sharing ideas freely, sharing personal experience, and also to search for new friends or partners. These websites give an opportunity for its users to socialize with new people and to keep in touch or reconnect with current or old friends and families across disperse continents, which traditionally replace the common traditional methods. These social network websites need accurate and careful investigations and findings on the usability issues for effective interactivity and more usability. However, little research might have previously invested on the usability of these social network websites. Therefore, we propose a new framework to study and test the usability of these social network sites. We namely call our framework "Interactivity". This framework will enable developers to assess the usability of the social network sites. It will provide an overview of the user's behavior while interacting in these social network websites. Performance of the framework will be performed using Camtasia software. This software will entirely capture the interactivity of users including the screen and the movements, which the screen and the motion of the user action will undergo to analysis at the end of our research.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1276-1277
• /
• 2006

The ever increasing requirements on today's compacts with regard to their geometry and precision call for flexible high-precision and most capable production systems. DORST Technologies has coped with these requirements by developing the new HP series for pressing forces between 1600 kN and 16000 kN and the new HS series for pressing forces between 150 kN and 1200 kN. These fully hydraulic presses featuring upper ram, lower ram, core rod, filler, up to 4 lower tool levels and up to 4 upper tool levels with closed-loop controlled movements. Thanks to latest servo technology and an electronic bus system it is possible to have all movements closed-loop controlled in the desired relation to each other. Thus, today's hydraulic presses provide high stroke rates, low energy consumption and a user-friendly interface. The input of data is carried out via clearly arranged screen masks on a touch-screen. The innovative DORST $IPG^{(R)}$ (Intelligent Program Generator) has been designed to support the set-up staff in preparing and optimizing the toolprogram. The combination of the machine type with the hydraulic unit determines the productivity in consideration of the specific application and the part to be pressed. Thanks to the closed-loop control circuits, DORST hydraulic automatic presses of the latest generation ensure unmatched precision and repeatability - and consequently process reliability - often without necessitating subsequent machining steps.

• Journal of Korea Multimedia Society
• /
• v.11 no.3
• /
• pp.373-385
• /
• 2008

The evolution of input device for computer has pretty much slowed down after the introduction of mouse as feinting input device. Even though stylus and touch screen were invented later on which provide some alternatives, all these methods were designed to have close range interaction with computer. There are not many options available for user to interact with computer from afar, which is especially needed during presentation. Therefore, in this paper, we try to fill the gap by proposing a laser pointer interaction system to allow user to give pointing input command to the computer from some distance away using only laser pointer, which is cheap and readily available. With the combination of image processing based software, we could provide mouse-like pointing interaction with computer. The proposed system works well not only in currently plane screen, but also in flexible screen by incorporating the feature of non-linear coordinate mapping algorithm in our system so that our system can support non-linear environment, such as curved and flexible wall.

• Journal of Korea Multimedia Society
• /
• v.12 no.10
• /
• pp.1363-1373
• /
• 2009

In a ubiquitous computing environment, people more and more become to use multiple displays. When using such ubiquitous displays, it is needed for users to seamlessly interact with the displays for a certain content. In this paper, we propose a seamless interface that allows users to see photos across multiple displays. Many photos can be displayed on a screen at the same time because they are shown in 3D space. And a group of photos is represented using a cube metaphor. A user can manipulate photos directly using a touch screen and also see the photos continuously using PDAs when the user moves to other places. In addition, the user can interact with the photos seamlessly using another display. The developed system was designed to interact according to user's movements and not to draw user's attention too much as a kind of ambient display. Using RFID and ultrasonic sensors it recognizes a user and the user's proximity to the display, and then automatically determines the screen image and the user interface accordingly.

• Journal of Information Processing Systems
• /
• v.3 no.1
• /
• pp.16-20
• /
• 2007

This paper describes the development of the sensor interface and driver program for a point of care (POC) device. The proposed pac device comprises an ARM9 embedded processor and eight-channel sensor input to measure various bio-signals. It features a user-friendly interface using a full-color TFT-LCD and touch-screen, and a bluetooth wireless communication module. The proposed device is based on the system on a programmable chip (SOPC). We use Altera's Excalibur device, which has an ARM9 and FPGA area on a chip, as a test bed for the development of interface hardware and driver software.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.2
• /
• pp.23-35
• /
• 2015

When people stands near someone's mobile device, it can easily be seen by others. To rephrase this, attackers use human psychology to earn personal information or credit information or other. People are exposed by social engineering attacks. It is certain that we need more than just recommendation for the security to avoid social engineering attacks. This is why I proposed this paper. In this paper, I proposed an authentication technique using NFC and Hash function to stand against social engineering attack. Proposed technique result is showing that it could prevent shoulder surfing, touch event information, spyware attack using screen capture and smudge attack which relies on detecting the oily smudges left behind by user's fingers. Besides smart phone, IPad, Galaxy tab, Galaxy note and more mobile devices has released and releasing. And also, these mobile devices usage rate is increasing widely. We need to attend these matters and study in depth.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.565-569
• /
• 2014

Recently, various kinds of new computer controlled devices have been introduced in a wide range of areas, and convenient user interfaces for controlling the devices are strongly needed. To implement natural user interfaces(NUIs) on top of the devices, new technologies like a touch screen, Wii Remote, wearable interfaces, and Microsoft Kinect were presented. This paper presents a natural and intuitive gesture-based model for controlling contents of LCD display. Microsoft Kinect sensor and its SDK are used to recognize human gestures, and the gestures are interpreted into corresponding commands to be executed. A command dispatch model is also proposed in order to handle the commands more naturally. I expect the proposed interface can be used in various fields, including display contents control.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.406-409
• /
• 2004

Recently, many auto makers and OEM are now developing various telematics control units(TCU). TCU has an embedded OS and many user-friendly services inherently and frequently the driver operates the TCU on driving a car. Although the TCU has some accident resistive functions, secondhand accidental problem arose. Current Korean domestic TCUs have some interfaces such as push-button, touch screen, voice recognition and etc. But, because of operational complexity, technical limitation, it has not sufficient user-friendly interface. In this paper, to overcome this problem, haptic devices are considered. We present haptic devices and applications on the basis of that of U.S. Immersion co. and also BMW's iDrive technology.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.379-384
• /
• 2012

In order to show the assembly process in detail, we used Script languages and it's simulation tried to do an automobile assembly process with 3D. 3D View techniques is the method of the optimum which helps the studying activity from industrial site. We developed 3D View in order to show a assembly process with 3D about engine part and tire part. Specially we experimented the user will be able to study actually using touch screen on the working.