• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.1-7
• /
• 2019

This paper presents CTP (Compact Translation Page), a compact representation of translation pages, for page mapping-based flash translation layers to improve RAM utilization and reduce the response time of solid state drives. CTP can store translation information twice in a translation page and the total number of translation pages stored in flash is reduced to half. Therefore, CTP halves the RAM size of the directory of translation pages and uses the saved RAM space for translation cache. CTP shows the best response time when compared to existing page mapping-based flash translation layers.

• Structural Engineering and Mechanics
• /
• v.85 no.1
• /
• pp.55-64
• /
• 2023

Energy-based seismic design and evaluation methods are promising to be involved in the next generation design codes. Accordingly, determining the distribution of earthquake input energy demand among floor levels is quite imperative in order to develop an energy-based seismic design procedure. In this paper, peak floor input energy demands are achieved from relative input energy response histories of several reinforced concrete (RC) frames. A set of 22 horizontal acceleration histories selected from recorded near-fault earthquakes and scaled in time domain to be compatible with the elastic acceleration design spectra of Turkish Seismic Design Code are used in time history analyses. The distribution of the computed input energy per mass values and the arithmetic means through the height of the considered RC frames are presented as a result. It is found that spatial distribution of input energy per mass is highly affected by the number of stories. Very practical yet consistent formulation of distributing the total input energy to story levels is achieved, as a most important contribution of the study.

• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.1-18
• /
• 2018

Emergency response has been considered as an important task in practice, because it is directly associated with the survival of patients. However, it is very difficult to increase the number of fire stations due to the budget and efficiency problem. Under this circumstances, it is critical to consider the suitability of current arrangement for 911 fire station. This is especially true in Gyeonggi-Do where the characteristics of each sub-area are different. In response, this study aims to identify types of areas that are vulnerable for emergency situations, and try to find relevant solutions for each type. For this purpose, we collected 151,463 data for emergency declaration data which exceeds 10 minutes for its response. Total 19 clustering variables which are used as input variables are selected, considering the characteristics of each area. As a result of clustering analysis, three clusters are identified and analyzed. Finally, areas whose emergence response time is in top 10% are selected and analyzed. This paper is expected to find current issues and problems of emergency response for each area, and help to understand and solve the problem for the local government.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.733-738
• /
• 2010

The leaves of Zizyphus jujuba have been used for various purposes including medicine and nutrition. In this study, the conditions for the ethanol extraction of antioxidant from Zizyphus jujuba were optimized using response surface methodology (RSM). A Box-Behnken design containing 15 experimental runs with three replicates was employed to study the effects of solvent extraction conditions such as extraction temperature ($^{\circ}C$, $X_1$), extraction time (min, $X_2$), and ethanol concentration (%, $X_3$) on the extraction yield of antioxidants from Zizyphus jujuba. The yields of total polyphenols and total flavonoid, and electron donating activity (EDA) were considered as response variables. The second-order polynomial model gave a satisfactory description of the experimental results showing different patterns of extraction conditions with variation in the linear, quadratic, and interaction effects of the independent variables. Based on four-dimensional RSM, one of the optimized sets of conditions was 45% ethanol, $45^{\circ}C$, and an extraction time of 15 min. Under the optimal conditions, the predicted values were 177.64 mg/g dry basis, 35.99 mg/g dry basis, and 86.14% Vit.C equivalents for total polyphenols, total flavonoids, and EDA, respectively. The experimental values showed good agreements with the predicted values.

• The Journal of Korean Physical Therapy
• /
• v.22 no.6
• /
• pp.59-63
• /
• 2010

Purpose: Driving a car is an essential component of daily life. For safe driving, each driver must perceive sensory information and respond rapidly and accurately. Brake response time (BRT) is a particularly important factor in the total stopping distance of a vehicle, and therefore is an important factor in traffic accident prevention research. The purpose of the current study was (1) to compare accelerometer. BRTs analyzed by three different methods and (2) to investigate possible correlations between accelerometer-BRTs and foot switch-BRTs, which are measured method using a foot switch. Methods: Eighteen healthy subjects participated in this study. BRT was measured with either a tri-axial accelerometer or a footswitch. BRT with a tri-axial accelerometer was analyzed using three methods: maximum acceleration time, geometrical center, and center of maximum and minimum acceleration values. Results: Both foot switch-BRTs and accelerometer-BRTs were delayed. ANOVA for accelerometer BRTs yielded significant main effects for axis and analysis, while the interaction effect between axis and analysis was not significant. Calculating the Pearson correlation between accelerometer-BRT and foot switch-BRT, we found that maximum acceleration time and center of maximum and minimum acceleration values were significantly correlated with foot switch-BRT (p<0.05). The X axis of the geometrical center was significantly correlated with foot switch-BRTs (p<0.05), but Y and Z axes were not (p>0.05). Conclusion: These findings suggest that the maximum acceleration time and the center of maximum and minimum acceleration value are significantly correlated with foot switch-BRTs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.3
• /
• pp.464-469
• /
• 2015

Response surface methodology (RSM) was used to monitor extraction characteristics of extracts from Sarcodon aspratus. Based on a central composite design, independent variables were microwave power (30~150 W), ethanol concentration (0~100%), and extraction time (1~9 min). Dependent variables were yield, electron-donating ability, total phenol contents, and SOD-like activity. Coefficients of determination ($R^2$) for dependent variables ranged from 0.80 at 0.97. The maximum extraction yield was 50.28% under conditions of 125.1 W microwave power, 18.67% ethanolic concentration, and 7.06 min extraction time. The maximum extraction electron-donating ability was 22.14% under conditions of 31.09 W, 45.76%, and 4.32 min. The maximum extraction total polyphenol content was 30.54 mg tannic acid equivalent/g at 122.54 W, 48.05%, and 8.36 min. The maximum extraction SOD-like activity was 33.44% at 121.17 W, 47.42%, and 8.41 min. Based on superimposition of four dimensional RSM with respect to extraction yield, electron-donating ability, total polyphenol content, and SOD-like activity obtained under various extraction conditions, optimum ranges of extraction conditions were found to be microwave power of 78~88 W, ethanol concentration of 39~57%, and extraction time of 3.5~9 min.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.79-87
• /
• 2017

This study was carried out to extract ginsenosides in by-products from honeyed red ginseng. Response surface methodology (RSM) was used to optimize the extraction conditions. Based on D-optimal design, independent variables were ethanol (extraction solvent) concentration (30-90%, v/v), extraction temperature ($25-70^{\circ}C$), and extraction time (5-11 h). Extraction yield (Y1) and total ginsenosides (Y2) in the extract were analyzed as dependent variables. Results found that extraction yield increased with increasing extraction temperature and time, whereas it was decreased with increasing ethanol concentration. Similar trends were found for the content of ginsenosides in the extracts, except for ethanol concentration, which was increased with increasing ethanol concentration. Regression equations derived from RSM were suggested to coincide well with the results from the experiments. The optimal extraction conditions for extraction yield and total ginsenosides were an extraction temperature of $56.94^{\circ}C$, ethanol concentration of 57.90%, and extraction time of 11 h. Under these conditions, extraction yield and total ginsenoside contents were predicted to be 84.52% and 9.54 mg/g, respectively.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.4
• /
• pp.81-94
• /
• 2021

Objective : Response time plays a prominent part in research on cognitive ability and the aging effect. This study aimed to identify the impact of cognitive ability on information processing by conducting cognitive response time (CRT) using a computer program. Methods : This study was conducted in 30 normal elderly (NE) and 30 elderly with amnestic MCI (aMCI), aged 65-79 years old living in Daegu and Gyeongbuk. The results were analyzed using the statistical analysis program R 4.0.2 (University of Auckland, New Zealand). Results : In the three sub-areas of CRT, the total response time showed a significant difference depending on group or age, and the error rate showed a significant difference depending on age or group in some sub-areas. In the aMCI group, the performance of CRT significantly correlated with that of the overall cognition and memory test. Conclusion : Information processing depending on aging or cognitive ability and the differential performance of processing speed could be observed through CRT. The performance of this test was found to be significantly correlated with that of the overall cognition and memory test. Therefore, CRT could be used meaningfully as a simplified tool to predict the initial cognitive disorder of the elderly in the community.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1158-1167
• /
• 1995

In this study, the dynamic instabilities of a beam, subjected to periodic short impulsive loading, are investigated using simple 2-DoF beam model. The behaviors of beam model whose axial motions are constrained are studied for the case of elastic and elastic-plastic behavior. In the case of elastic behavior, the chaotic responses due to the periodic pulse are identified, and the characteristics of the behavior are analysed by investigating the fractal attractors in the Poincare map. The short-term and long-term responses of the beam are unpredictable because of the extreme sensitivities to parameters, a hallmark of chaotic response. In the case of elastic-plastic behavior, the responses are governed by the plastic strains which occur continuously and irregularly as time increases. Thus the characteristics of the response behavior change continuously due to the plastic strain increments, and are unpredictable as well as the elastic case.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.441-443
• /
• 1995

A new optical-resistive voltage divider, which consists of light emitting diode, optic fiber, PIN-photo diode and a high qualify shielding resistive divider, whose total response time is 7.35 [ns], has been obtained. The optical to electrical signal converter was constructed with GaAsP series light emitting diode. The response characteristics have been verified by applying the Marx impulse voltage generator experimentally. Comparing with the performance of conventional resistive voltage divider, the characteristics of the proposed optical-resistive voltage divider are more excellent in step response and less sensitive to electromagnetic interference.