Journal of the Korean Society of Clothing and Textiles
/
v.21
no.2
/
pp.262-276
/
1997
The purpose of this study was to develop torso patterns according to the somatotype and thus to contribute to the ready-made industry. Classification of the somatotypes was based on each individual's lateral and frontal view and development of torso patterns according to the somatotype was to center on the darts. The subjects in this study were female college students of 18 to 24 year old. This study was carried out by the following procedures: 1. Classification of the somatotypes was based on each individual's lateral and frontal view. The somatotypes were classified into 18 types. 2. Eighteen subjects who had prominent somatic characteristics and average mea- surements were chosen. 3. Subjects were clothed and a sensory evaluation was carried out. 4. Experiments of alterations were carried out. The quantities of revision of torso patterns due to the difference of somatotypes were measured through these. These method were due to the items of the sensory evaluation. 5. By obtaining the results of the sensory evaluation and experiments of alterations, the torso patterns according to the somatotypes were developed. These were inputted to the CAD System and compared with one another. 6. Grading of the torso pattern according to each somatotype was carried out and thus a file of torso patterns was made according to the somatotypes.
The purpose of this study was to compare torso pattern made by draping and flat pattern method in terms of the size of breast. The size of this study was classified as 75A and 75D according to the size of breast. Each torso pattern by the combination of the size and pattern method was compared and analyzed. In order to test the fit of the draping and flat pattern that was developed according to the size of breast, the outer appearance was evaluated. The results of the study were as follows: First, The most striking size difference was difference between the front and the back on bust line level, which decides on position of the side seam in comparison of size between draping and flat pattern of 75A and 75D. In the flat pattern, the difference between the front and the back in the size of breast was consistent regardless of a change in the size of breast. However, in the draping, the bigger breast led to the bigger difference between the front and the back on bustline level. Second, the flat pattern in 75D was evaluated to be the worst in 27 items among total 46 items for the evaluation of outer appearance in the draping and flat pattern of 75A and 75D. Third, regardless of size, the draping was evaluated to be more suitable in the areas related to neck, arm hole, and waist dart than the flat pattern. These results are suggesting that the draping is a method of reflecting characteristic of the body type more accurately than the flat pattern, and that the draping is a more suitable method than the flat pattern for the design of clothing pattern of the body type with big breast like 75D.
This thesis intends to suggest a new wedding dress pattern through researches on history and changes of wedding dress, researches on silhouette and details and analyses of existing basic patterns. In this study, to develop torso patterns of top dresses selected as preferred designs through literature reviews and company surveys, dress form sizes suitable for standard sizes were selected and study basic patterns were made using draping techniques. The study finds characteristics of body type dimension that is changed when wearing brassiere (hereinafter, 'bra') for wedding dress through customer surveys for development of basic patterns of wedding dress. That is, wearing wedding bra was used for the purpose of increasing the bust size and we will evaluate later whether this increase helps completeness of aesthetic impression through wearing evaluation. As the result, it was found out that top torso pattern wearing wedding bra made wearers feel more comfortable and in the aspect of aesthetic impression, it provided impacts on women's beautiful silhouettes. The effects of whether a bra is used or not on changes in patterns were reviewed through the degree of polymerization of finished patterns. When a bra for dresses was worn, the waist front length increased by1.7cm, the bust circumference increased by 2.1cm, and the amount of dart increased by 1.5cm in the patterns. A new torso pattern for top dresses, which will solve problems evaluated in each of the above from the aspect of composition of pattern by a method through analysis of existing basic patterns and multi-dimensional cut patterns wearing wedding bra, will be suggested.
The aim of this study was to develop a body type suitable for adult men aged from their 20s to their 40s and to present a method of drafting related patterns. To this end, the somatic surface pattern data from previous studies were used. The research method involved drafting torso patterns for each type by setting and distributing the ease to the somatic surface pattern. Appearance evaluation was performed with virtual clothing. Then, the torso pattern for each body type was completed and presented as a draft method. SPSS was used for data analysis in this study. The research results are as follows. Types 1, 2, and 3 were set to 7%, 6%, 5%; 7%, 6%, 4%; and 6.5%, 7%, and 6% for chest, waist, and hip circumference measurements, respectively. The ratio of front to back was 50%:50%, 50%:50%, and 50%:50% of the spare for each body part for Type 1; 70%:30%, 50%:50%, and 60%:40% for Type 2, and 60%:40%, 70%:30%, and 60%:40% for Type 3. A tight-fit torso pattern for each body type suitable for adult males in their 20s to 40s was drafted, which was modified and supplemented through the evaluation of the first and second virtual wear. Considering the practicality of this approach, for generalization of the patterns, the items of the pattern were converted into a drafting method and presented as a draft method.
Underlying dress forms for high coverage patterns are very important in the dress industry. Size 9 from brand D was chosen according to the analysis that it was the best option because a dress should have a large allowable range in one size. The criteria for selection were the dress form with a waist circumference of 63.50 centimeters, which is close to the standard size of women in Korea. Brassieres for dresses were included to enhance the aesthetic value of the correction process in producing a basic dress pattern. An experimental torso pattern was applied to evaluate the fit and suitability of the dress form that was also later verified in the process of the dress works. Three dresses were produced and presented on the chosen study dress form. The research procedures are as follows. First, the sell-through rates and feedbacks were collected from the dress form vendor. Second, a literature survey on dresses and a dress company investigation were conducted. Third, the amount of body dimension changes due to the use of a bra in the dresses were examined. Fourth, after the correction of the dress form, the torso pattern was made by draping. Fifth, the torso experimental clothing made of muslin material was evaluated. Sixth, the dress works of the top design were presented using the size 9 basic pattern developed by brand D.
This study aims to develop a fitted torso pattern suitable for males in their forties and fifties who are obese-a group that accounts for more than fifty percent of men in this age group-using a 3D virtual fitting program. Size Korea's 2022 data for obese males in their forties and fifties is utilized for this study. In terms of the research method, a 3D program (CLO 3D) is used to implement the target group's various body types and to apply fitted torsos that enable verification and evaluation of the pattern's fit and ease. The characteristics of fitted torso patterns for obese bodies are as follows: the front centerline is a profile line; shoulder darts are added by reflecting waist-abdominal protrusion in the front panel; and shoulder, arm, waist, and center-back darts are constructed for the back panel. For obese bodies, the minimum circumference ease amounts should be approximately 6-7cm for the chest, 6cm for the waist, and 6-7cm for the hips. Based on an evaluation of the virtual fit of the developed fitted torso pattern, the data shows that a pattern (foundation) such as this is well suited for obese body types with an average of 4.67/5 points for reverse triangular obesity, an average of 6.67/7 points for log obesity, and an average of 6.69 points for the ease amount.
Journal of the Korean Society of Clothing and Textiles
/
v.33
no.7
/
pp.1109-1120
/
2009
This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.
We have made knitwear in a different way from the typical woven pattern; it does not have the dart, even for women's tops. The purpose of this research was to compare the fit and appearance of the torso pattern for circular knitted fabric between virtual try-on garments and real garments. First, a woman in her 20's was scanned by a 3D body scanner, and thus producing a virtual avatar. I prepared knit patterns and created a torso pattern appropriate for circular knitted fabric. Next, I measured the body size of the avatar. The 2D patterns for the torso and sleeves were developed using the Yuka Super ALPHA : Plus. The 3D virtual garments were made from the imported 2D patterns and were then tried on the 3D virtual avatars. Finally, the fit of the real garments and the virtual garments was compared. While the shape of the virtual try-on garments were similar to the real garments, the folding and sagging were different. This study found the length was the same as woven wear. However the actual bust size and the clothing size were the same which is not a typical characteristic of woven wear. In the case of hem measurement, more space was needed than actual body size but less space was needed than in woven patterns.
Journal of the Korean Society of Clothing and Textiles
/
v.36
no.1
/
pp.112-125
/
2012
This study researches the preferred ease of torso sloper according to body sizes and drop. For this, the eases of main body parts such as chest circumference, waist circumference, hip circumference, biacromion length, and waist back length were analysed; in addition, the drop differences of body and pattern were explored to find out characteristics of silhouette changes. The subjects were 55 women in their early 20s (aged from 20 to 24) and individual torso block made with muslin was corrected 1-3 times by a personal fitting. There were 3 meaningful results. First, the preferred ease were individually various; however, the eases of all torso blocks should be same at the pattern making step. Second, the eases were also significantly different among body size groups and the bigger group preferred less ease at the biacromion length, waist back length, armhole-depth, chest circumference, and waist circumference. Third, the eases of chest circumference and hip circumference were significantly changed among drop groups. To change their body drop, H-shape drop adopted less ease at chest circumference and more ease at hip circumference; however, A-shape drop adopted more ease at chest circumference and less ease at hip circumference.
This study developed and proposed a pattern that can fit the body and compensate for the defects of the body type by applying shoulder princess line to the torso pattern and including formative characteristics of each object on the study of body shape's change in 40-59 year old middle aged women. The results of this study are as follows; First, according to the analysis of 'Size Korea 2010' such as average, standard deviation, minimum value, and maximum value of 48 items, women showed increase in most of the items except height as they became aged. Second, factor analysis was made to understand the shape component factors of middle aged women and to use them for the body type classification. Third, cluster analysis was made according to the shape of front and sides which should be considered in pattern production based on the factor analysis results, and the body type with the measurement values most similar to the average of direct measurement of 'Size Korea 2010' was set as standard. Fourth, in designing torso patterns through the $1^{st}$ and the $2^{nd}$ wearing experiments according to the body type, body shapes such as Chest Circumference, Waist Circumference, Hip Circumference, and Waist Back Length were considered in pattern design, goodness-of-fit was enhanced with difference in margin according to body type and different margins in front and back, and fitting satisfaction was improved by applying princess line.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.