• Imaging Science in Dentistry
• /
• v.48 no.3
• /
• pp.177-184
• /
• 2018

Purpose: This study was performed to evaluate the influence of voxel size and the accuracy of 2 cone-beam computed tomography (CBCT) systems in the detection of vertical root fracture (VRF) in the presence of intracanal metallic posts. Materials and Methods: Thirty uniradicular extracted human teeth were selected and randomly divided into 2 groups(VRF group, n=15; and control group, n=15). The VRFs were induced by an Instron machine, and metallic posts were placed in both groups. The scans were acquired by CBCT with 4 different voxel sizes: 0.1 mm and 0.16 mm (for the Eagle 3D V-Beam system) and 0.125 mm and 0.2 mm (for the i-CAT system) (protocols 1, 2, 3, and 4, respectively). Interobserver and intraobserver agreement was assessed using the Cohen kappa test. Sensitivity and specificity were evaluated and receiver operating characteristic analysis was performed. Results: The intraobserver coefficients indicated good (0.71) to very good (0.83) agreement, and the interobserver coefficients indicated moderate (0.57) to very good (0.80) agreement. In respect to the relationship between sensitivity and specificity, a statistically significant difference was found between protocols 1 (positive predictive value: 0.710, negative predictive value: 0.724) and 3 (positive predictive value: 0.727, negative predictive value: 0.632) (P<.05). The least interference due to artifact formation was observed using protocol 2. Conclusion: Protocols with a smaller voxel size and field of view seemed to favor the detection of VRF in teeth with intracanal metallic posts.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.329-338
• /
• 2014

Patients who lost molars from dental caries or periodontitis have difficulty in maintaining their vertical dimension because their incisors and premolars also show vertical tooth movement. Missing posterior molars leads to occlusal interference and collapse of occlusal plane due to extrusion of opposite teeth and tipping of adjacent teeth. When this condition persists over long time, mandible moves forward, so it causes mobility and labioversion of upper incisors. This progress cannot be stopped spontaneously and the situation gets worse and worse. Therefore, for a patient with pathologic teeth migration caused by chronic periodontitis, interdisciplinary approach which is including periodontal treatment, orthodontic teeth alignment and prosthetic restoration of missing molars is required. This case report shows successful multidisciplinary approach to a patient who lost vertical dimension due to severe dental caries and periodontitis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.564-568
• /
• 2004

Odontoma, hamartomas of odontogenic orgin, are composed of all the structures that make up teeth, which may lead to interference with the eruption of its associated tooth. On the basis of gross, radiographic, and microscopic features, two types of odontoma are recognized: compound and complex. The etilogy of odontomas is unknown, although local trauma, infection, and gentic factors have been suggested. Odontomas occur central in bone between the roots of teeth and the mauority are asymptomatic. Although these tumors occur frequently and constitute 22% of all odontogenic tumors, are very rare. Erupted odontoma are defined as tumors that it occurs a calcifed mass may be defected on the ridge. The treatment of chico is the surgical removal of the lesion followed by a biopsy. This report presents a case of 8-year-old girl with the delayed eruption of the mandibular first molar by the calcified mass within the operculum covered the central fossa. And it was diagnosed as erupted complex odontoma by excisional biopsy.

• Tribology and Lubricants
• /
• v.40 no.1
• /
• pp.8-16
• /
• 2024

This study conducts numerical modeling and eigen-analysis of a rod-fastened rotor, which is mainly used in aircraft gas turbine engines in which multiple disks are in contact through curvic coupling. Nayak's theory is adopted to calculate surface parameters measured from the tooth profile of the curvic coupling gear. Surface parameters are important design parameters for predicting the stiffness between contact surfaces. Based on the calculated surface parameters, elastoplastic contact analysis is performed according to the interference between two surfaces based on the Greenwood-Williamson model. The equivalent bending stiffness is predicted based on the shape and elastoplastic contact stiffness of the curvic coupling. An equation of motion of the rod-fastened rotor, including the bending stiffness of the curvic coupling, is developed. Methods for applying the bending stiffness of a curvic coupling to the equation of motion and for modeling the equation of motion of a rotor that includes both inner and outer rotors are introduced. Rotordynamic analysis is performed through one-dimensional finite element analysis, and each element is modeled based on Timoshenko beam theory. Changes in bending stiffness and the resultant critical speed change in accordance with the rod fastening force are predicted, and the corresponding mode shapes are analyzed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.141-153
• /
• 2018

A non-physiological occlusal plane caused by continuous tooth loss, occlusal wear, and failure of a prosthesis may result in an unattractive appearance and functional problems, such as reduced masticatory efficiency and occlusal interference. Therefore, when undertaking prosthetic treatment for edentulous patients or patients with a collapsed occlusal plane, it is important to establish an occlusal plane that is compatible with masticatory function. The patient in this case report had undergone restoration of a completely edentulous maxilla using an implant-supported fixed prosthesis. On follow-up examination in the following 6 years, mechanical complications were observed in the existing implant prosthesis, including porcelain chipping, occlusal wear, and screw loosening. Moreover, due to occlusal wear and supraeruption of the opposing anterior teeth, as well as loss of some posterior teeth, the occlusal plane had collapsed. Following diagnosis, the patient underwent full mouth rehabilitation, involving additional implant installation in edentulous sites, recreation of the existing prosthesis, and prosthetic restoration of all remaining teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.444-449
• /
• 2002

The term 'impaction' is used to designate a tooth which remains unerupted in the jaw beyond the time at which it should normally be erupted. The main causal factors are local (lack of space, ectopic positions of teeth, supernumerary teeth, cyst, the occurrence of infectious process in the eruption path, traumatic facial injury etc.). Systemic and genetic disorders, however, may have primary failure of eruption and retarded eruption as additional symptoms (cleidocranial dysplasia, osteopetrosis etc.). Most cases of impacted teeth reported in the literature are of permanent teeth. The absence of primary teeth occur rarely whereas impaction of second primary molars is more numerous than all other impactions. Impaction due to primary failure of eruption must be distinguished from the secondary infraocclusion. The etiology of impaction of primary teeth is probably related to early ankylosis of primary teeth, but it is not clear. Failure of eruption of primary teeth may cause a number of complications, such as interference with development and eruption of succedaneous teeth, formation of cyst, and damage to adjacent teeth. This study is to report cases of primary failure of eruption in the primary dentition.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.531-536
• /
• 2005

Infraclusion may be defined as teeth that stop their relative occlusal movement in the dental arches during or after the period of active eruption and then remain under the occlusal plane. Delayed exfoliation, malocclusion, increased susceptibility to dental caries and periodontal disease of both the neighboring teeth and retained molar, and dislocation of the successor are the consequencces of infraclusion of primary molars. Therefore, early diagnosis and appropriate treatments are necessary. The therapeutic approach of the infracluded teeth varied from preservation to extraction. The teeth with simple infraclusion without any signs of interference with occlusal and jaw development may be examined periodically with follow-up check and radiographically. However, if the infracluded tooth interferes with normal eruption of successor or shows any sign of delayed resorption, or the tipping of adjacent teeth or supraeruption of opposing teeth is expected, the teeth inflicted should be extracted and appropriate measures should be provided in order to maintain the normal development of occlusion and dentition. The adjacent teeth which have been collapsed over a infracluded deciduous teeth can disturb the arch length perimeter. In such cases, surgical approach might be necessary, although it would be difficult when teeth are severly leaned. However, an easier surgical access have been obtained by space regaining procedures, in young patients whose arch length has been shortened due to the infracluded teeth.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.54-59
• /
• 2022

This paper is a purpose to study and analyze the failure examples for timing belt, camshaft position sensor and ignition coil of LPG automotive engine. The first example, whe the service man install the front case bracket of engine, he excessively tightened up a 12mm bolt for being fixed of brackct. As a results, the bolt was separated from joint part so that it was put in between the crankshaft sprocket. Therefore the belt was broken off because of interference between timing belt and sprocket tooth. The second example, it verified the disharmony phenenomen of engine that the gap of the camshaft position sensor and camshaft senseing point assembled on cylinder head part was small more than iregular value so that the it was generated senseing damage phenomenon by pulse signal misconduct. The third example, it was found the engine disharmony phenomenon that the fire in the ignition coil was leaked by inner damage of Number 2 ignition coil.Therefore, the the manager of a car throughtly have to inspect not in order to arise the failure symptoms.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.559-566
• /
• 2001

This study was undertaken to demonstrate the forces in the mandibular alveolar bone generated by activation of the mandibular posterior crossbite appliance in the treatment of buccal crossbite caused by lingual eruption of mandibular second molar. A three-dimensional photoelastic model was fabricated using a photoelastic material (PL-3) to simulate alveolar bone. We observed the model from the anterior to the posterior view in a circular polariscope and recorded photogtaphically before and after activation of the mandibular posterior crossbite appliance. The following results were obtained : 1. When the traction force was applied on the buccal surface of the mandibular second molar, stress was concentrated at the lingual alveolar crest and root apex area. The axis of rotation also was at the middle third of the buccal toot surface and the root apex, so that uncontrolled tipping and a buccal traction force for the mandibular second molar were developed. 2. When the traction force was applied on the lingual surface of the mandibular second molar more stress was observed as opposed to those situations in which the force application was on the buccal surface. In addition, stress intensity was increased below the loot areas and the axis of rotation of the mandibular second molar was lost. In result, controlled tipping and intrusive tooth movements were developed. 3. When the traction forte was applied on either buccal or lingual surface of the second molar, the color patterns of the anchorage unit were similar to the initial color pattern of that before the force application. So we can use the lingual arch for effective anchorage in correcting the posterior buccal crossbite. As in above mentioned results, we must avoid the rotation and uncontrolled tipping, creating occlusal interference of the malpositioned mandibular second molar when correcting posterior buccal crossbite. For this purpose, we recommend the lingual traction force on the second molar as opposed to the buccal traction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.595-603
• /
• 2005

Incomplete removal of bacteria contaminated dentin or enamel associated with caries is a potential problem in restorative dentistry Secondary or residual caries, pulpal inflammation and hypersensitivity may result from bacteria left after the initial preparation, especially if an adequate seal against microleakage is not obtained. A possible solution to eliminate residual bacteria left in a cavity preparation would be to treat the cavity with cavity disinfectant wash. But a potential problem with using a cavity disinfectant with dentin bonding agents could be their interference with the ability of the resin to bond to the tooth micromechanically. The purpose of this study was to evaluate the effect of 2% chlorhexidine containing cavity disinfectant ($Consepsis^{(R)}$) on shear bond strength and microleakage of dentin bonding agents, $Adper ^{TM}$ $Scotchbond^{TM}$ Multi-Purpose, $Adper^{TM}$ Single Bond and $Adper^{TM}\;Prompt^{TM}\; L-Pop^{TM}$ Sixty and sixty sound human third molar teeth, respectively, were used for shear bond strength and microleakage test. For experimental group, cavity disinfectant was applied before dentin bonding agents, and was not applied for the control group. The result from the this study can be summarized as follows ; 1. Use of 2% chlorhexidine containing cavity disinfectant($Consepsis^{(R)}$) does not significantly affect the shear bond strength of dentin bonding agents. 2. Use of 2% chlorhexidine containing cavity disinfectant($Consepsis^{(R)}$) does not significantly affect the microleakage of dentin bonding agents.