• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.77-89
• /
• 2009

With an increasing number of cars in Korea, the government is constantly providing roads and their related facilities. However the fundamental problems of cities like the structure of cities and the environment of roads make the traffic congestion of downtowns. To solve this problem the construction of toll roads such as tunnels and bridges is increasing but use rates of drivers is low. With more tolls required, less persons will use the roads. Thus this study is to consider offering discounted charges when using the two or more toll roads together. This study analyzes the impact that discounted charges would bring to the demand. In the meantime we looks into what the proper range should be for the discount. The results of this study are expected to be used as basis for the introduction of a discount system in the future.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.47-58
• /
• 2009

Calibrating toll roads of highway networks needs additional weights within volume delay functions not like other general highway lints. However, current methods assigning additional weights in the volume delay function of toll roads are not sufficiently enough to predict real toll road volumes measured, since it does not consider discounting rates and an extra charges. This study develops methods to improve relevant and reliable volume delay functions. Suggested ideas include a method of weighting volume delay functions considering a value of time of vehicle types, a method of weighting volume delay functions considering lane distributions of vehicles, and a method of weighting volume delay functions considering percentages of link lengths per a number of lanes of toll roads. It is found that the method of weighting volume delay functions considering lane distributions of vehicles show most reliable and appropriate results, while the first method shows overestimation and the third method does underestimation of highway link volumes. In terms of assignment methods, total OD equilibrium assignment shows better results than PCU based assignment.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.17-27
• /
• 2007

Since early 1990s, several developed countries have applied the Electronic Toll Collection System (ETCS) to toll roads in order to solve traffic congestion and delay problems at toll plazas. For the successful operation of the ETCS, it is important to correctly forecast the ETCS using rate. In this study, it was conceived to develop a sophisticated demand forecasting model of the ETCS for toll roads in Changwon City The Binary Logit and neural network models were tested for the model considering 11 explaining variables. The best results in prediction accuracy and goodness-of-fit were obtained on the neural network model. However, because of the difficulty in predicting the 11 variables and its fitness in wide range, the Binary Logit model which considers three policy variables only is recommended as the model to forecast the ETCS using rate.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.31-40
• /
• 2009

Some road charges toll to finance the cost or to manage traffic congestion. With a growth of PPI projects, toll roads would be increase continuously. Tolls have a considerable influence on user's route choice, and sometimes can affect to the departure time and even to mode choice. For modelling toll roads, user's WTP or VOT has an important role and it is general that VOT is equivalent to the wages of workers. The current way of modelling technique yields various toll price elasticity from low to high. When there exist few alternative routes, unrealistic result that all traffic assigned to some shortest path may occur. The toll price elasticity can be influenced by alternative route and congestion level, but some result shows nearly unrealistic patterns. The model to forecast more realistic toll road demand is very essential for estimating toll revenue, choice of optimal toll level & collecting location and establishing toll charge strategy. This paper reviewed some literatures about toll road modelling and tested case study about the assignment technique with different VOT. The case study shows that using different VOT yields more realistic result than the use of single VOT.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.381-385
• /
• 2015

This research aims to investigate critical factors of the government's role in achieving success in Public Private Partnership (PPP) toll road projects in Indonesia according to government and private sectors' perceptions. A preliminary interview Subsequently a questionnaire survey was also conducted involving 143 respondents across the two sectors from eight operating toll were five critical factors of the government's roles in achieving success in PPP toll road projects, namely; "Active involvement in overall project stage activities", "Establishment of good bureaucracy", "Provision of conducive environment", "Appropriate project planning and competitive tendering" and "Provision of appropriate government support and supervision". This research finding is expected to assist the government in defining clear roles and underlying responsibilities in development of PPP toll roads in Indonesia.

• Korean System Dynamics Review
• /
• v.4 no.2
• /
• pp.131-151
• /
• 2003

Traffic congestion stems from the widespread desires of people to purse certain goals that inevitably overload existing roads every day. he a transportation policy, congestion toll system has been implemented in Seoul, since 1996. The growing concerns on whether the system would achieve sustained results in the future motivated us to investigate the effectiveness of this policy. Developing and running the congestion toll simulation model, we find that this policy is not an effective policy in the long m. The paper indicates the power of system dynamics approach as a tool for evaluating complex policy like a congestion toll, and suggest that city transportation policy maker should approach the problem with systems thinking and analyze the effectiveness of policy on the basis of understanding the dynamic relationships among subsystems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.7-15
• /
• 2011

The travel time value is important factor for the evaluation of feasibility the transportation facility investment. The existing method for calculation of the travel time for each mode uses daily average trip purpose. So the value of travel time is constant because it is estimated with only daily average proportion. This daily constant time value can distort the results of future demands of toll roads or economic appraisals for the projects. The proportion of the trip purpose varies by time periods. Accordingly the value of travel time also varies by time periods. In this study, times periods are classified as morning peak, evening peak, business time off-peak, and non-business time off-peak. And trip purpose proportions are sorted by each time period from raw data of Seoul household trip study, then the value of travel time for each time period is estimated with these sorted purpose proportions. A case study of Seoul Jung-gu and Yongsan-gu performed with newly estimated time value by time periods. The result of benefit calculation with the daily constant time value is overestimated approximately annual 2.5 billion Won compared by time values by time periods. The demands of toll roads are also overestimated with the existing daily constant time value by daily 3,500 vehicles and total revenue of toll roads are overestimated by annually 1 billion Won. In conclusion, the value of travel time by each time period enables the more precise economic evaluation of the transportation facility investment projects, mode choice behavior, and route choice behavior especially for toll roads.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.101-109
• /
• 2007

Two variations of toll roads exist: mainline toll plazas and entry/exit tolls. On a mainline toll system(open toll scheme), all vehicles stop at various locations along the highway to pay a toll. While this may save money from the lack of need to construct tolls at every exit, it can cause lots of traffic congestion, and drivers could evade tolls by going around them. With entry/exit tolls, vehicles collect a ticket when entering the highway, which displays the fares it will pay when it exits, increasing in cost for distance travelled. Upon exit, the driver will pay the amount listed for the given exit. The pressures on the Seoul ring roadway network have been changing over time. In the past, the emphasis was on mobility and maintenance of the road network to provide an efficient transportation network, but recently, road use has outstripped the network's ability to extend and expand the road network and hence the policy emphasis has moved towards reducing free riders rather than mitigating its effects. In addition to this pressure is an incidental pressure, which argues that provision of free ride segments generates further traffic in isolation of other factors. This paper is examining policies to reduce the burden of traffic congestion in Seoul ring roadway which is used open toll scheme for decades. One key mechanism to achieve this policy aim is automatic charging mechanism on freeway, but if a nation-wide electronic toll collection is to be implemented successfully, there are a number of prerequisites which must be place.

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.7-14
• /
• 2003

Statistics shows that 80% of freeway users travel less than 50km, and only 8% of them do over 100km. It means that the freeway is used for commuting. As a result, the freeway is not used efficiently and social cost is high. The current toll system aims for the efficient usage of the freeway by restraining short-distance trips and inducing long-distance ones. Thus, policies such as minimum toll system and discount for long-distance trips have been carried out. However. these two policies take no account of demand management between the freeway and alternative roads. They merely consider the compensation for charge on users, so the assessment of discount rate and distinction of distance are not reasonable. Consequently, not only the effective demand management but also the evaluation of those policies has been difficult to be achieved. The objective of this paper is to analyze those problematic policies and to establish a reasonable and improved toll system. In addition, this study presents the methodology to minimize social cost, which can be achieved by reducing short trips and encouraging long ones on the freeway. A new methodology of freeway toll system is applied and the results are presented.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.143-154
• /
• 2013

PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.