• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권5호
• /
• pp.1333-1353
• /
• 2012

The robustness of a network is usually measured by error tolerance and attack vulnerability. Significant research effort has been devoted to determining the network design with optimal robustness. However, little attention has been paid to the problem of how to improve the robustness of existing networks. In this paper, we investigate how to optimize attack tolerance and communication efficiency of an existing network under the limited link addition. A survival fitness metric is defined to measure both the attack tolerance and the communication efficiency of the network. We show that network topology reconfiguration optimization with limited link addition (NTRLA) problem is NP-hard. Two approximate solution methods are developed. First, we present a degree-fitness parameter to guide degree-based link addition method. Second, a preferential configuration node-protecting cycle (PCNC) method is developed to do trade-off between network robustness and efficiency. The performance of PCNC method is demonstrated by numerical experiments.

• 컴퓨터교육학회논문지
• /
• 제15권2호
• /
• pp.47-55
• /
• 2012

한국정보화진흥원에서 개발한 4가지 부류의 20문항으로 구성된 한국형 성인 인터넷 중독 자가진단 척도 (K-척도)의 4가지 요인 가운데 '내성 및 몰입 요인'이 인터넷 중독 진단에 가장 큰 영향을 주는 요인임을 데이터마이닝 기법으로 밝힌다. 본 연구에서는 이를 토대로 사용자의 직무 무관 인터넷 이용 활동에 대한 내성정도를 이용하여 인터넷 중독 진단을 수행하는 새로운 방법을 제시한다. K-척도와 제안된 내성정도를 이용한 인터넷 중독 진단 방법에 대하여 설문조사에 참여한 일부 사용자 대상으로 피드백을 받은 결과, 제안된 사용자 중심의 진단 방식이 사용자 고의에 의한 미발견 중독자 발견에 효과가 있음을 확인하였다.

• Journal of Plant Biotechnology
• /
• 제5권3호
• /
• pp.157-161
• /
• 2003

Proline is known as an osmoprotectant accumulating in response to salt and dehydration stresses. An increased level of proline is achieved by either an induced synthesis or a reduced degradation of proline. In an attempt to increase salt tolerance in carrot, a P5CS gene from mothbean was introduced via an Agrobacterium-mediated transformation. The resulting carrot cells and the regenerated plants containing the transgene showed increased levels of proline compared to nontransgenics. The transgenic cell line, Pj2 showed about 6 times increased degree of tolerance determined by relative growth after a treatment in 250 mM NaCl. In facts, due to the retarded growth shown in non-saline condition, Pj2 cells grow only about 1.2 times better than nontransgenic control under salt stress condition. Taken together, it appears that a P5CS is a key enzyme in proline biosynthesis and the increased accumulation of proline by overexpression of the enzyme is enough to enhance tolerance to salt stress in carrot.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권1호
• /
• pp.1-9
• /
• 2000

In this paper, a design method of fault-tolerance is presented for the nuclear digital control systems composed of software and hardware. As a quantitative design method measure of fault-tolerance, we used Reliability, Availability and Safety. To implement the proposed fault-tolerance, a prototype system has been devised for the digital control systems and a quantitative method of 'Markovian Model' is applied. The results provide the appropriate degree of redundancy and diversity, and fail-safe.

• 한국융합학회논문지
• /
• 제9권2호
• /
• pp.33-42
• /
• 2018

본 연구의 목적은 간호 대학생의 데이트 폭력 가해경험, 폭력 허용도, 사회적 문제해결능력의 정도를 확인하고, 이들 간의 관계를 파악하는 것이다. 충청권 소재 5개 대학교에서 편의 표집된 간호학과 대학생 219명에게 자가보고 형식의 질문지를 통해 자료를 수집하였다. 자료 분석은 SPSS 20.0프로그램을 이용하여 t-test, ${\chi}^2$ test, Partial correlation coefficients를 시행하였다. 그 결과, 간호대학생의 데이트 폭력 가해경험이 높을수록 데이트 폭력 허용도가 높고(r=0.31, p<.001), 데이트 폭력 허용도가 높을수록 사회적 문제해결능력이 부정적임(r=-0.26, p<.001)을 알 수 있었고, 학과 만족도와 음주 정도가 데이트 폭력 가해와 관련이 있는 것으로 나타난다. 따라서 데이트 폭력을 예방하기 위해 데이트 폭력 허용도에 대한 올바른 인식과 사회적 문제해결능력을 함양시키기 위한 데이트 폭력 예방 교육 및 훈련 프로그램을 마련하는데 합리적인 근거를 제시하였다.

• 대한수의학회지
• /
• 제9권1호
• /
• pp.11-22
• /
• 1969

Experimental studies were performed to observe the difference in tolerance of small animals to oxygen poisoning, and also to examine the effects of certain drug for it. The three experimental groups consisted of mature rat group, immature rat group and mouse group. The animals were exposed to 5 atm. of 100% oxygen using hyperbaric chamber, and they were observed for oxygen poisoning by pulmonary and central nervous system manifestation. The tolerance to oxygen poisoning was represented by half fatality time in each experimental group. The drug applied was ammonium chloride $NH_4Cl$ and it was administered intraperitoneally in various dosages for particular attribution of its prophylactic effect. The following conclusions were made; 1. The immature rat group showed the higher degree of tolerance to oxygen poisoning, as evidenced by a more prolonged half fatality time in the group. No significant difference in the half fatality time between the mature rat and the mouse group was observed. 2. The fact that the immature group showed the higher degree of tolerance as compared with the mature rat group represented by delayed onset of convulsion. 3. There was a remarkable difference in the Lung Weight/Body Weight ratio between the experimental and control group. 4. The animals with a shorter half fatality time uniformally displayed an earlier onset of convulsive seizure as the sign of oxygen poisoning and a significant elevated Lung Weight/Body Weight ratio. 5. Ammonium chloride at the dosage of 450mg per kg body weight had the most pronounced prophylactic effect on oxygen poisoning.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.343-350
• /
• 2021

PURPOSE. The success of an implant-prosthetic rehabilitation is influenced by good implant health and an excellent implant-prosthetic coupling. The stability of implant-prosthetic connection is influenced by the rotational tolerance between anti-rotational features on the implant and those on the prosthetic component. The aim of this study is to investigate the rotational tolerance of a conical connection implant system and its titanium abutment counterpart, in various conditions. MATERIAL AND METHODS. 10 preparable titanium abutments, having zero-degree angulation (MegaGen, Daegu, Korea) with an internal 5-degree conical connection, and 10 implants (MegaGen, Daegu, Korea) were used. Rotational tolerance between the connection of implant and titanium abutments was measured through the use of a tridimensional optics measuring system (Quick Scope QS250Z, Mitutoyo, Kawasaki, Japan) in the as-received condition (Time 0), after securing with a titanium screw tightening at 35 Ncm (Time 1), after tightening 4 times at 35 Ncm (Time 2), after tightening one more time at 45 Ncm (Time 3), and after tightening another 4 times at 45 Ncm (Time 4). RESULTS. The group "Time 0" had the lowest values of rotational freedom (0.22 ± 0.76 degrees), followed by the group Time 1 (0.46 ± 0.83 degrees), the group Time 2 (1.01 ± 0.20 degrees), the group Time 3 (1.30 ± 0.85 degrees), and the group Time 4 (1.49 ± 0.17 degrees). CONCLUSION. The rotational tolerance of a conical connection is low in the "as received" condition but increases with repetitive tightening and with application of a torque greater than 35 Ncm.

• 한국작물학회지
• /
• 제58권2호
• /
• pp.190-195
• /
• 2013

In this study, the response of 22 soybean cultivar sprouts to flooding stress was investigated. After sprouts were subjected to flooding stress for 10 days at the V4-V5 growth stages, their dry weights were compared. All plants were kept in a greenhouse under natural light conditions, an average daytime temperature of $35.6{\pm}5.3^{\circ}C$ and an average nighttime temperature of $18.2{\pm}1.7^{\circ}C$. Soybeans were grown in a concrete bed filled with silt loam soil. Subjecting plants to flooding stress resulted in a large reduction in plant dry weight, plant height, number of nodes, and number of leaves. Cultivars differed significantly in their responses to flooding stress, as indicated by these characteristics (p<0.05). Soybean cultivars were classified into three groups based on their degree of flood tolerance: strong, moderate, and weak. Hannamkong, Namhaekong, Sobaegnamulkong, and Sorogkong had strong tolerance for flood conditions. Tawonkong, Pureunkong, Eunhakong, Myeongjunamulkong, Doremikong, Saebyeolkong, Paldokong, Sowonkong, Pungsannamulkong, Dagikong, Dachaekong, and Anpyeongkong had weak tolerance for flood conditions.

• 한국대기환경학회지
• /
• 제7권3호
• /
• pp.219-226
• /
• 1991

Results from study on physiological responses to $SO_2$ of Quercus spp. selected for restoration of vegetation damaged by air pollution in the field study were as follows. Tolerance of Quercus aliena, Q. acutissima and Q. mongolica used in this study to $SO_2$ was higher in that order and tolerance of these plants to $SO_2$ was high comparatively among trees composing of major forest vegetation of Korea including natural forests and plantations. Stomatal resistance of these plants was increased after exposure to $SO_2$ and range of increase was different among species. From discrepancy between order of tolerance to $SO_2$ and range of increase in stomatal resistance, we were estimated that resistance mechanisms of Quercus spp. were different among species as mechanism originated in avoidance and resistance, respectively. Water potential of plant leaves reduced after exposure to $SO_2$, degree of reduction accorded with order of tolerance to $SO_2$. Reduction of water potential of plants after exposure to $SO_2$ was initiated before appearance of visible damage in plant leaves and water potential of plants exposed to $SO_2$ of low concentration, in which plants were not showed viaible damage was also reduced.

• 한국항공운항학회지
• /
• 제6권1호
• /
• pp.21-29
• /
• 1998

The purpose of the present paper is to determine the time required and error tolerance limits for flight data computation. The results of statistical analysis showed that the calculator side computation required about 50 seconds for each question and wind side computation needed about 115 seconds for each question. In case of error tolerance limits, it was found that the error tolerance limit for altitude computation war 90 feet and two knots of interval was recommanded for the speed computation in calculator side, and one degree of interval for heading computation and five knots interval for speed computation in wind side.