• The Journal of Advanced Prosthodontics
• /
• v.6 no.3
• /
• pp.151-156
• /
• 2014

PURPOSE. To investigate the microtensile bond strength between two all-ceramic systems; lithium disilicate glass ceramic and zirconia core ceramics bonded with their corresponding glass veneers. MATERIALS AND METHODS. Blocks of core ceramics (IPS e.max$^{(R)}$ Press and Lava$^{TM}$ Frame) were fabricated and veneered with their corresponding glass veneers. The bilayered blocks were cut into microbars; 8 mm in length and $1mm^2$ in cross-sectional area (n = 30/group). Additionally, monolithic microbars of these two veneers (IPS e.max$^{(R)}$ Ceram and LavaTM Ceram; n = 30/group) were also prepared. The obtained microbars were tested in tension until fracture, and the fracture surfaces of the microbars were examined with fluorescent black light and scanning electron microscope (SEM) to identify the mode of failure. One-way ANOVA and the Dunnett's T3 test were performed to determine significant differences of the mean microtensile bond strength at a significance level of 0.05. RESULTS. The mean microtensile bond strength of IPS e.max$^{(R)}$ Press/IPS e.max$^{(R)}$ Ceram ($43.40{\pm}5.51$ MPa) was significantly greater than that of Lava$^{TM}$ Frame/Lava$^{TM}$ Ceram ($31.71{\pm}7.03$ MPa)(P<.001). Fluorescent black light and SEM analysis showed that most of the tested microbars failed cohesively in the veneer layer. Furthermore, the bond strength of Lava$^{TM}$ Frame/Lava$^{TM}$ Ceram was comparable to the tensile strength of monolithic glass veneer of Lava$^{TM}$ Ceram, while the bond strength of bilayered IPS e.max$^{(R)}$ Press/IPS e.max$^{(R)}$ Ceram was significantly greater than tensile strength of monolithic IPS e.max$^{(R)}$ Ceram. CONCLUSION. Because fracture site occurred mostly in the glass veneer and most failures were away from the interfacial zone, microtensile bond test may not be a suitable test for bonding integrity. Fracture mechanics approach such as fracture toughness of the interface may be more appropriate to represent the bonding quality between two materials.

• Journal of Information Display
• /
• v.12 no.2
• /
• pp.93-96
• /
• 2011

Single-phased $CaZrO_3:Dy^{3+}$, $Tm^{3+}$ series have been successfully synthesized by solid-state reaction, and their luminescence properties were investigated. Under 355 nm excitation, $CaZrO_3:Dy^{3+}$ series showed characteristic emission of $Dy^{3+}$, which exhibited yellowish white color. By introducing $Tm^{3+}$ into the matrix, the emitted hue of the $Dy^{3+}$-doped sample could be easily tailored to white, and simultaneously, energy transfer from $Tm^{3+}$ to $Dy^{3+}$ was observed. The color coordinates of the optimum white-emitting sample were (0.321, 0.323), which were very close to the data of the National Television Standard Committee (0.33, 0.33). The co-activated phosphors presented good match to ultraviolet light-emitting diodes (LEDs), which revealed that they could be novel promising phosphors utilized in white LED application.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.4
• /
• pp.412-418
• /
• 2017

During orthodontic treatment, formation of white spot lesions (WSLs) around brackets has long been recognized as a potential risk. This study performed to investigate effect of preventing enamel demineralization and remineralization by application of fluoride-containing orthodontic primer. Fifty extracted bovine incisors teeth were randomly allocated to 3 groups: (I) Non-preparation specimens, (II) Application of Light Bond$^{TM}$ as fluoride containing orthodontic primer, (III) Application of Transbond$^{TM}$ XT Primer as traditional orthodontic primer without fluoride. Each group is demineralized under artificial carious solution. The demineralization pattern was evaluated using a Q-ray view, Vickers hardness test and polarized light microscope. The remained primer was calculated as 35 - 50%. The highest surface microhardness was shown on Light Bond$^{TM}$ surface. There were statistically significant differences in Vickers microhardness number between adjacent areas of Light Bond$^{TM}$ and non-prepared area. There was almost no demineralization of the enamel surface under the Light Bond$^{TM}$. At the adjacent site of Light Bond$^{TM}$, the shallow caries pattern and remineralization appearance were also observed. These results suggest that the use of fluoride-containing primers may be useful for bracket attachment to reduce enamel demineralization during orthodontic treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.644-652
• /
• 2007

Statement of problem: Resonance frequency analysis is evaluated as the non-invasive and objective method for the evaluation of implant stability and has been increasingly used. It is necessary to evaluate the factors affect the ISQ measurement stability. Purpose: This study was performed to evaluate the effect of the autoclave sterilization and reuse of $Smartpeg^{TM}$ on ISQ measurement. Material and methods: $SmartPeg^{TM}$ (Integration Diagnostics Ltd., $G\ddot{o}teborg$, Sweden) of autoclave group (A) was autoclave sterilized 9 times and $Smartpeg^{TM}$ of reuse group (R) was reused 9 times. Ten $SmartPeg^{TM}s$ were allocated to each group and after each autoclave sterilization and reuse, implant stability quotient (ISQ) values were measured 3 times from the two directions a and b at a right angle. $Osstell^{TM}$ mentor (Integration Diagnostics Ltd. $G\ddot{o}teborg$, Sweden) was used and type 1 (article no. 100353) $Smartpeg^{TM}$ was selected according to $Smartpeg^{TM}$ reference list. Osstem Implant US II future (Osstem Co., Seoul, Korea) in $4.0mm{\times}11.5mm$ was embedded in the self-curing acrylic resin ($Orthojet^{(R)}$, Lang Dental, U.S.A.). Data was statistically analyzed by one-way ANOVA $({\alpha}=.05)$ and scheffe test was done where a significant difference exist. Correlation test was also done between ISQ value and the number of autoclave sterilization or reuse. Results: 1. In autoclave group, the means and sd. of ISQ value before autoclave sterilization were $84.97{\pm}0.41,\;84.93{\pm}0.74$ at direction a and b. There was significant differences between autoclave groups at direction a and b (P=.000). 2. In reuse group, the means and sd. of ISQ value before reuse were $85.40{\pm}0.62,\;85.50{\pm}0.57$ at direction a and b. There was no significant difference between reuse groups at direction a and b (P>.05). 3. There was a weak positive correlation between the number of reuse and ISQ value at direction a and b (${\gamma}=.207$ and .246, P<.01). Conclusion: Within the limitations of this study, the following conclusions were drawn. Till ninth reuse of $Smartpeg^{TM}$, the ISQ measurement stability did not be affected. After twice autoclave sterilization of $Smartpeg^{TM}$ the ISQ measurement stability was affected.

• Journal of Life Science
• /
• v.28 no.6
• /
• pp.648-655
• /
• 2018

Enhancement mechanistic actions of testosterone (TS) productions in mouse Leydig TM3 cells by the eritadenine (EA) and/or the Agaricus blazei mycelial liquid culture extract (ABMLCE). Productions of TS in TM3 cells were investigated in normal and oxidative-stressed culture conditions. In the normal culture condition, TM3 cells grown in a Dulbecco's Modified Eagle's Medium (DMEM) were treated with EA (0~100 ppm) and ABMLCE (10 ppm) + EA (0~50 ppm) for 24 hr, and in the oxidative-stressed culture condition, the cells grown in DMEM containing $50{\mu}M$ $H_2O_2$ to induce oxidative stress for 4 h were treated with the same as those in the normal culture condition. TS content, $3{\beta}$-hydroxysteroid dehydrogenase 2 (HSD3B2) enzyme activity, $5{\alpha}$-reductase 2 ($5{\alpha}-R2$) enzyme activity, and free-radical nitric oxide (NO) content in the culture media were measured using their corresponding assay kits. EA, ABMLCE, and ABMLCE + EA significantly, p<0.05, enhanced TS productions in both cultural conditions, relative to control treatment. The activity of the HSD3B2 enzyme, which is involved in the production of precursors for TS production, was elevated by EA, ABMLCE, and ABMLCE + EA treatments in both culture conditions. The activity of the $5{\alpha}-R2$ enzyme, which converts TS to dihydroxytestosterone (DHT), was not significantly affected in either culture condition by EA, ABMLCE, or ABMLCE + EA treatments. The treatments included reduced NO content. These results indicate that EA, ABMLCE, and EA + ABMLCE treatments elevated TS in TM3 cells via the enhancements of HSD3B2 activity and the reduction of NO production, and also imply that EA and ABMLCE or EA + ABMLCE could be useful materials for the production of TS in humans.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.65-74
• /
• 2011

Purpose: In this study we investigated improvement degree of reading ability of the student who was in a condition of dyslexia symptoms by wearing $ChromaGen^{TM}$ lenses. Methods: After wearing the $ChromaGen^{TM}$ lens for 3 months, the dyslexia symptoms corrective lens, 52 students who had suspected symptom of dyslexia were asked questions, and we measured the improvement degree of reading ability of the student. Results: The $ChromaGen^{TM}$ wearer read 110.26${\pm}$22.07 words in 1 minute, and naked yeses or glass wearing students read 106.42${\pm}$22.70 words. Reading ability of the student having suspected symptom of dyslexia were measured after wearing $ChromaGen^{TM}$ for 3 months. The results showed improvement reading ability of 3.70${\pm}$0.29 (p=0.01, t=2.26), 4.50%${\pm}$0.10 (p=0.01, t=2.78) for $ChromaGen^{TM}$ wearer with statistical difference. A survey on the satisfaction of reading improvement with wearing $ChromaGen^{TM}$ showed that 88.4% of questioned person answered wearing $ChromaGen^{TM}$ had improved their dyslexia symptoms. Conclusions: With statisical significance (p<0.05). this study suggests that $ChromaGen^{TM}$ lens has an effect on improving reading speed of dyslexia patient. We know from these results that the $ChromaGen^{TM}$ lens which is used to dyslexia had an effect to improvement of reading speed for dyslexia. And the results of this study is statistically different (p<0.05).

• BMB Reports
• /
• v.33 no.6
• /
• pp.531-536
• /
• 2000

Tropomyosin (TM) is an important actin binding protein involved in regulation of muscle contraction. Unacetylated striated tropomyosin failed to bind to actin whereas unacetylated smooth tropomyosin bound well to actin. It has been demonstrated that high actin affinity of unacetylated ${\alpha}-tropomyosin$ was ascribed to the carboxyl terminal amino acid residues. In order to define the role of the carboxyl terminal residues of tropomyosin molecule on actin binding, two mutant tropomyosins were constructed. TM11 is identical to the striated tropomyosin except that the carboxyl terminal last three amino acids was replaced with $^{282}NNM^{284}$ whereas in TM14 $^{276}HA^{277}$ was substituted with smooth specific $^{276}QT^{277}$. TM11 and TM14 were overproduced in Escherichia coli and analyzed for actin affinity. The apparent binding constants (Kapp) of unacetylated tropomyosins were $2.2{\times}10^6M^{-1}$ for sm9, $1.03{\times}10^6M^{-1}$ for TM14, $0.19{\times}10^6M^{-1}$ for TM11, $>0.1{\times}10^6M^{-1}$ for striated, respectively. This result indicated that higher actin affinity of the unacetylated smooth tropomyosin was primarily attributed to the presence of QT residues in the smooth sequence. In case of the Ala-Ser (AS) dipeptide extension of the amino terminus of tropomyosin, Kapp were $21.1{\times}10^6M^{-1}$ for AS-sm9, $8.0{\times}10^6M^{-1}$ for AS-11, $4.7{\times}10^6M^{-1}$ for AS-14, $3.8{\times}10^6M^{-1}$ for AS-striated. AS-TM11 showed considerably higher actin affinity than AS-TM14, implying that interaction of Ala-Ser of the amino terminus with the carboxyl terminal residues. Since Kapp of AS-TM11 was significantly lower than that of AS-sm9, the presence of QT might be required for restoration of high actin affinity of the smooth ${\alpha}-tropomyosin$. These results suggested that the carboxyl terminal amino acid residues Glutamine275-Threonine276 are important for actin affinity of the recombinant smooth ${\alpha}-tropomyosin$, particularly of unacetylated smooth ${\alpha}-tropomyosin$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.3
• /
• pp.353-366
• /
• 2021

The solubilities of different multicomponent lanthanide oxide (Ln₂O₃) solid solutions including binary (Ln₁ and Ln₂ = La, Nd, Eu, or Tm), ternary (Ln₁, Ln₂, and Ln₃ = La, Nd, Eu, or Tm), and higher systems (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) were studied after aging for four weeks at 60℃. Our recent study revealed that the phase transformations in binary ((La, Nd) and (La, Eu)) and ternary (La, Nd, Eu) systems are responsible for the formation of (La, Nd)(OH)₃, (La, Eu)(OH)₃, and (La, Nd, Eu)(OH)₃ solid solutions, respectively. The variations in the mole fractions of La³⁺, Nd³⁺, and Eu³⁺ in the sample solutions of these hydroxide solid solutions indicated that a thermodynamic equilibrium might account for the apparent La, Nd, and Eu solubilities. Conversely, the binary and ternary systems containing Tm₂O₃ as the heavy lanthanide oxide retained the oxide-based solid solutions, and their solubility behaviors were dominated by their congruent dissolutions. In the higher multicomponent system, the X-ray diffraction patterns of the solid phases, before and after contact with the aqueous phase indicated the formation of a stable oxide solid solution and their solubility behavior was explained by its congruent dissolution.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.3
• /
• pp.815-818
• /
• 2003

Various kinds of chinese herbs have been known as to promote growth rate of animals. We investigated the growth promoting effect of the selected plants by using fish and rats as experimental animals. In a preliminary test by using fish, Eleutherococcus senticosus and Artemisia capillasis were found to be effective. Based on this result, we manufactured the mixture of plant extracts and applied this mixture to rice, named as Kiwoomi/sup TM/. When we administered Kiwoomi/sup TM/ to rats, it was found to be effective in growth promotion. Kiwoomi/sup TM/ - administered group showed 49.3% (0.75g/kg B.W.) and 52.3% (1.59/kg.B.W.) growth promotion, respectively. On the other hand, Control group showed 46.2% growth promotion. This growth promotion was supported by increase of GH and IGF-1 level in the Kiwoomi/sup TM/- administered group. From these results, we suggest that this functional rice could be helpful for growing children.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.82-88
• /
• 2017

The purpose of this study is to investigate shear bond strengths of $Peak^{(R)}$ Universal Bond (Ultradent, USA) containing 0.2% chlorhexidine in bovine dentin. Total of 30 bovine teeth were divided into three groups, 10 teeth each. Before comparing and evaluating shear bond strength, in group I, $Adper^{TM}$ Single Bond Universal (3M ESPE, USA) was applied, in group II, processing with $Consepsis^{(R)}$ (Ultradent, USA) was followed by applying $Adper^{TM}$ Single Bond Universal, and in group III, $Peak^{(R)}$ Universal Bond was applied and filled with $Filtek^{TM}$ Z-350 XT (3M/ESPE, USA) shade B3. As a result, processing with $Consepsis^{(R)}$ after acid etching showed no statistically significant influence on shear bond strength of dentin (p > 0.05). The shear bond strength of with or without $Consepsis^{(R)}$ on $Adper^{TM}$ Single Bond Universal and that of $Peak^{(R)}$ Universal Bond showed statistically significant difference (p < 0.05).