• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.38.1-38.10
• /
• 2016

Background: The aims of this study are to evaluate the lip morphology and change of lip commissure after mandibular setback surgery (MSS) for class III patients and analyze association between the amount of mandibular setback and change of lip morphology. Methods: The samples consisted of 14 class III patients treated with MSS using bilateral sagittal split ramus osteotomy. Lateral cephalogram and cone-beam CT were taken before and about 6 months after MSS. Changes in landmarks and variables were measured with 3D software program $Ondemand^{TM}$. Paired and independent t tests were performed for statistical analysis. Results: Landmarks in the mouth corner (cheilion, Ch) moved backward and downward (p < .005, p < .01). However, cheilion width was not statistically significantly changed. Landmark in labrale superius (Ls) was not altered significantly. Upper lip prominence angle (ChRt-Ls-$ChLt^{\circ}$) became acute. Landmarks in stomion (Stm), labrale inferius (Li) moved backward (p < .005, p < .001). Lower lip prominence angle (ChRt-Li-$ChLt^{\circ}$) became obtuse (p < .001). Height of the upper and lower lips was not altered significantly. Length of the upper lip vermilion was increased (p =< 0.01), and length of the lower lip vermilion was decreased (p < .05). Lip area on frontal view was not statistically significantly changed, but the upper lip area on lateral view was increased and change of the lower lip area decreased (p > .05, p < .005). On lateral view, upper lip prominent point (UP) moved downward and stomion moved backward and upward and the angle of Ls-UP-Stm ($^{\circ}$) was decreased. Lower lip prominent point (LP) moved backward and downward, and the angle of Stm-LP-Li ($^{\circ}$) was increased. Li moved backward. Finally, landmarks in the lower incisor tip (L1) moved backward and upward, but stomion moved downward. After surgery, lower incisor tip (L1) was positioned more superiorly than stomion (p < .05). There were significant associations between horizontal soft tissue and corresponding hard tissue. The posterior movement of L1 was related to statistically significantly about backward and downward movement of cheilion. Conclusions: The lip morphology of patients with dento-skeletal class III malocclusion shows a significant improvement after orthognathic surgery. Three-dimensional lip morphology changes in class III patients after MSS exhibited that cheilion moved backward and downward, upper lip projection angle became acute, lower lip projection angle became obtuse, change of upper lip area on lateral view was increased, change of lower lip area decreased, and morphology of lower lip was protruding. L1 was concerned with the lip tissue change in statistically significant way.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.6
• /
• pp.628-634
• /
• 2008

The purpose of this study is to examine reproducibility of operation plan and 3-dimentional jaw movement patterns by comparing jaw position of STO with post-operative jaw position. Twenty patients with class III dental and skeletal malocclusion who were treated with Le-Fort I osteotomy and B-SSRO were reviewed. Lateral cephalometric radiographs were taken within two weeks before operation and two days after operation. Cephalometric radiographs were compared and analyzed with orthognathic computer program '$V-Ceph^{TM}$'. Post-operative maxillary advancement was insufficient compared to maxillary advancement through STO. Post-operative setback movement was over compared to mandibular setback movement through STO. But statistically this is not significant. Maxillary vertical location is insignificant on the whole. Especially post-operative maxillary clockwise rotation is significant compared to maxillary rotation through STO. Post-operative maxillary clockwise rotation tendency is generally observed in all patients. So surgeons and staffs must consider this tendency when operation plan is established ans operation is being performed. Using intra or extra oral marking points, face bow, and bite plate will make exact surgery possible.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7981-7984
• /
• 2014

Purpose: Colorectal cancer (CRC) screening with fecal occult blood testing (FOBT) has been associated with a reduction in CRC incidence and CRC-related mortality. However, a conventional FOBT requires stool collection and handling, which may be inconvenient for participants. The EZ-Detect$^{TM}$ (Siam Pharmaceutical Thailand) is a FDA-approved chromogen-substrate based FOBT which is basically a self-checked FOBT (no stool handling required). This study aimed to evaluate the accuracy of EZ-Detect for CRC detection. Methods: This prospective study was conducted in the Faculty of Medicine, Siriraj Hospital, Bangkok, Thailand between November 2013 and May 2014. Some 96 patients with histologically-proven CRC and 101 patients with normal colonoscopic findings were invited to perform self-checked FOBT according to the manufacturer's instructions. Results were compared with endoscopic and pathologic findings. Sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) for CRC detection were calculated. Results: The present study revealed the sensitivity, specificity, PPV and NPV of this self-checked FOBT for CRC detection to be 41% (95% CI: 31-51), 97% (95% CI: 92-99), 93% (95% CI: 81-98) and 63% (95% CI: 55-70), respectively. The overall accuracy of the self-checked FOBT for identifying CRC was 70%. The sensitivity for CRC detection based on 7th AJCC staging was 29% for stage I, 32% for stage II and 50% for stage III/IV (P=0.19). The sensitivity was 33% for proximal colon and 42% for distal colon and rectal cancer (P=0.76). Notably, none of nine infiltrative lesions gave a positive FOBT. Conclusions: The self-checked FOBT had an acceptable accuracy of CRC detection except for infiltrative tumors. This home-administrated or 'DIY' do-it-yourself FOBT could be considered as one non-invasive and convenient tool for CRC screening.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.684-692
• /
• 2011

The quality attributes of thigh meat from a certified meat-type commercial Korean native chicken (WoorimatdagTM, WM) and a commercial broiler (Ross, CB) raised under the same environmental conditions, were compared. One-d-old, mixedsex WM (200), and 200 broilers (Ross, CB) each were randomly assigned to floor pens (20 chickens per pen). The production stages (I, II, and III) were selected based on similar live weight. The crude fat contents of WM thigh meat were lower than those of CB. WM thigh meat contained higher stearic and arachidonic acid contents but lower palmitoleic and oleic acid contents compared to those of CB. The thigh meat color CIE $L^*$- and CIE $b^*$-values of WM were lower, but inosine-5'-monophosphate content was higher in WM than CB in whole production stages. WM thigh meat showed higher collagen content, hardness, springiness, gumminess, and chewiness than CB. In sensory evaluation, odor, taste, and overall acceptance were higher while color was lower in WM. Based on these results, it can be concluded that even if commercial broilers are raised under the same environmental conditions as WM, the unique quality attributes of WM thigh meat are distinctively unique.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.4
• /
• pp.253-258
• /
• 2014

PURPOSE. To compare marginal and internal gaps of zirconia substructure of single crowns with those of three-unit fixed dental prostheses. MATERIALS AND METHODS. Standardized Co-Cr alloy simulated second premolar and second molar abutments were fabricated and subsequently duplicated into type-III dental stone for working casts. After that, all zirconia substructures were made using $Lava^{TM}$ system. Marginal and internal gaps were measured in 2 planes (mesial-distal plane and buccal-palatal plane) at 5 locations: marginal opening (MO), chamfer area (CA), axial wall (AW), cusp tip (CT) and mid-occlusal (OA) using Replica technique. RESULTS. There were significant differences between gaps at all locations. The $mean{\pm}SD$ of marginal gap in premolar was $43.6{\pm}0.4{\mu}m$ and $46.5{\pm}0.5{\mu}m$ for single crown and 3-unit bridge substructure respectively. For molar substructure the $mean{\pm}SD$ of marginal gap was $48.5{\pm}0.4{\mu}m$ and $52.6{\pm}0.4{\mu}m$ for single crown and 3-unit bridge respectively. The largest gaps were found at the occlusal area, which was $150.5{\pm}0.5{\mu}m$ and $154.5{\pm}0.4{\mu}m$ for single and 3-unit bridge premolar substructures respectively and $146.5{\pm}0.4{\mu}m$ and $211.5{\pm}0.4{\mu}m$ for single and 3-unit bridge molar substructure respectively. CONCLUSION. Independent-samples t-test showed significant differences of gap in zirconia substructure between single crowns and three-unit bridge (P<.001). Therefore, the span length has the effect on the fit of zirconia substructure that is fabricated using CAD/CAM technique especially at the occlusal area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.6
• /
• pp.671-678
• /
• 2004

Statement of problem. Reducing treatment time in implant dentistry is a matter of main concern. There are so many factors affecting the success rate of immediate or early loaded implant for the initial bone response. The especially microscopic properties of implant surfaces playa major role in the osseous healing of dental implant. Purpose. The aims of this study were to perform a histologic and histomorphometric comparison of the healing characteristics anodically roughened surface, HA coated surface and RBM surface implant, and to compare of ISQ values measured by $Osstell^{TM}$ for resonance frequency analysis in dogs mandible during 2 weeks. Material and method. Bone blocks from 2 dogs were caught after covered healing for 0 day(2 h); Group I, 1 week; Group II and 2 weeks; Group III. One longitudinal section was obtained for each implant and stained with hematoxylin and eosin. Histomorphometric analysis was done with Kappa Imagebase system to calculate bone-to-implant contact and bone volumes inside the threads. ISQ values were measured in every time of surgery schedule. Conclusion. The experiment revealed that: 1. The percentages of bone-to-implant contact on the fixture in each group were not significantly different(P > 0.05). 2. The percentages of bone area inside the threads on the fixture in each group were not significantly different(P > 0.05). 3. The ISQ level showed clinical stability of each fixture during 2 weeks(all ISQ level ${\geq}71$ ).

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.648-658
• /
• 1997

The purpose of this study was to compare the effects of various techniques on the quality and quantity of instrumentation in curved canals. Instrumentation time was evaluated too. Forty eight canals of resin blocks($35^{\circ}$) were divided into three groups and filed. In group A, 16 blocks were instrumented using a step-back technique with stainless steel(SS) K-file(Mani, Matsutani Seisakusho Co.,Japan). In group B, canals were prepared with SS K-files using the Endo-Angle (Nakanishi Dental MFG.CO.,LTD.,Japan). Group C was prepared using N i-Ti engine-driven instruments (Quantec Series $2000^{TM}$ system). Group A and B were filed from # 5 to # 25 at the apex followed by a 1 mm stepback technique, and the coronal half of the canals were flared with Gates Glidden burs(#2,3,4). Group C was instrumented from # 1 to # 8. After the instrumentation time was measured, canals were filled with India ink, and photographed, which to magnify the canal images 8 times. Using these photographs the apical portions were evaluated And scored from 1 to 4 according to the severity of ledging and zipping. On the same photographs, the area of the coronal two thirds of the canals were measured using a personal computer with the computer program Brain and Digitizer (SummaSketch III). The following results were obtained. 1. Instrumentation time was significantly shorter for group C, as opposed to group A and B(ANOVA, P<0.05). 2. The qualitative evaluation of the apical portions of the canals showed no significant difference between the groups(Kruscal-Wallis, p>0.05). 3. The area removed by group C was significantly smaller than group A and B(ANOVA, P<0.05).

• Molecules and Cells
• /
• v.45 no.8
• /
• pp.575-587
• /
• 2022

Human ABCB6 is an ATP-binding cassette transporter that regulates heme biosynthesis by translocating various porphyrins from the cytoplasm into the mitochondria. Here we report the cryo-electron microscopy (cryo-EM) structures of human ABCB6 with its substrates, coproporphyrin III (CPIII) and hemin, at 3.5 and 3.7 Å resolution, respectively. Metal-free porphyrin CPIII binds to ABCB6 within the central cavity, where its propionic acids form hydrogen bonds with the highly conserved Y550. The resulting structure has an overall fold similar to the inward-facing apo structure, but the two nucleotide-binding domains (NBDs) are slightly closer to each other. In contrast, when ABCB6 binds a metal-centered porphyrin hemin in complex with two glutathione molecules (1 hemin: 2 glutathione), the two NBDs end up much closer together, aligning them to bind and hydrolyze ATP more efficiently. In our structures, a glycine-rich and highly flexible "bulge" loop on TM helix 7 undergoes significant conformational changes associated with substrate binding. Our findings suggest that ABCB6 utilizes at least two distinct mechanisms to fine-tune substrate specificity and transport efficiency.

• Journal of Life Science
• /
• v.19 no.9
• /
• pp.1218-1225
• /
• 2009

Difractose anhydrides (DFAs) is studied as a sweetener for diabetics because of its structural property. DFAs have four types: DFA I, III, IV (degradation of levan) and V (degradation of inulin). Especially, DFA IV has been shown to enhance the absorption of calcium in experiments using rats. Levan fructotransferase is an enzyme for producing di-d-fructose-2,6':6,2-dianhydride (DFA IV). To identify structural characterization, we purified wild-type and mutants (D63A, D195N and N85S) of levan fructotransferase (LFTase) from Microbacterium sp. AL-210. These proteins were purified to apparent homogeneity by Ni-NTA affinity column, Q-sepharose ion exchange and gel filtration chromatography and detected by SDS-PAGE. They were also analyzed by circular dichroism (CD) measurements, JNET secondary structure prediction, activity measurements at various temperatures, and pH analysis. The optimum pH for the enzyme-catalyzed reaction was pH 7.5 and optimum temperature was observed at $55^{\circ}C$. Along with wild-type LFTase, mutants were analyzed by CD measurement, fluorescence analysis and differential scanning calorimetry (DSC). N85S showed less $\alpha$-helix and more $\beta$ strand than others. Also, N85S showed almost the same curve as wild-type in their steady-state fluorescence spectra, whereas mutant D63A and D195N showed higher intensity than wild-type. The amino acid sequence of wild-type LFTase was compared to the sequences of exo-inulinase from Aspergillus awamori, a plant fructan 1-exohydrolase from Cichorium intybus, and Thermotogo maritime (Tm) invertase and showed a high identity with Exo-inulinase from Aspergillus awamori.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.2
• /
• pp.101-108
• /
• 2007

The object of this experiment was to investigate the effect of mixture which consist of different seeding rates and species on dry matter yield and quality in Daejon area. The field trials were conducted from 2003 to 2005 at Chungnam National University in order to evaluate the dry matter yield and quality of different mixture. The experimental design includes three mixture types: Conventional mixtures, CM{orchardgrass(Potomac) 50% + tall fescue (Fawn)20% + Kentucky bluegrass(Kenblue) 20% + white clover(Regal) 10%}, red clover + mixtures, RM{orchardgrass(Potomac) 40% + tall fescue(Fawn) 20% + Kentucky bluegrass(Kenblue) 10% + red clover(Kenland) 30%) and Turf type grass + mixtures, TM {orchardgrass (Potomac) 50% + turf type grass (tall fescue, Millennium 20% + Kentucky bluegrass, Midnight 10% + perennial ryegrass, Palmer III 10%) + white clover(Regal) 10%}. The average DM yield for 2 years of red clover+mixture(11,656kg/ha) was higher than those of the other mixtures(p<0.05). The content of crude protein and dry manu digestibility were higher in red clover+mixture than in other mixtures(p<0.05). but, the content of fibrous compounds like as NDF, ADF, cellulose and lignin were lower in red clover+mixture than in other mixtures(p<0.05). The crude protein dry matter(CPDM) yield was higher in red clover + mixture(2,832kg/ha) than in conventional mixture(2,372kg/ha) and turf type + mixture(2,266kg/ha)(p<0.05). The digestible dry matter (DDM) yield was higher in red clover + mixture(8,881 kg/ha) than in conventional mixture(8,255kg/ha) and turf type + mixture(7,314kg/ha)(p<0.05). In botanical composition at last cutting time in 2005, conventional mixture were maintained orchardgrass 45%, tall fescue 22%, Kentucky bluegrass 5% and white clover 24%. Red clover + mixture were maintained orchardgrass 40%, tall fescue 22%, Kentucky bluegrass 4% and red clover 31%. turf type + mixture were orchardgrass 37%, tall fescue 23%, Kentucky bluegrass 6%, perennial ryegrass 8% and white clover 24%, respectively. As summary, DM yields and quality of mixture species and seeding rates were observed significant difference. The results of this experiment indicated that red clover + mixture was more effective in enhancing the DM yield and forage quality in Daejon area.