• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.634-638
• /
• 2004

Titanium silicalite-1 (TS-1) molecular sieve was produced by microwave heating of amorphous titanium-containing solid precursors after impregnation with aqueous TPAOH solution. $SiO_2-TiO_2$ xerogel, sub-micron sized $SiO_2-TiO_2$ prepared by thermal plasma process, and Ti-containing mesoporous silica, Ti-HMS, were tested as the solid phase substrates. Highly crystalline product was obtained within 30 min. after microwave irradiation with yields over 90% using $SiO_2-TiO_2$ xerogel, which showed essentially identical physicochemical properties to TS-1 prepared by conventional hydrothermal method. Excellent catalytic activity was also obtained for 1-hexene epoxidation using $H_2O_2.\;SiO_2-TiO_2$ particles prepared by thermal plasma and Ti-HMS were found inferior as a substrate for TS-1, probably due to difficulties in wetting the surface uniformly with TPAOH.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2637-2642
• /
• 2009

In this present paper, we prepared $MWCNT/TiO_2$ composites by using pre-oxidized multi-walled carbon nanotubes (MWCNTs) with different titanium alkoxide precursors in benzene solvent. The composites were comprehensively characterized by BET surface area, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX) and UV-Vis absorption spectroscopy. The photoactivity of the prepared materials, under UV irradiation, was tested using methylene blue (MB) in aqueous solution. Finally, according to the results of MB removal experiment, it can be considered that the MB degradation infect mainly caused by photocatalytic effect of $TiO_2$. Furthermore, the bactericidal test of the composites was also determined. It was indicated that $MWCNT/TiO_2$ composites with sunlight had greater effectiveness for B. cereus, S. aureus and E. coli than any other experimental conditions.

• The Korean Journal of Ceramics
• /
• 제6권1호
• /
• pp.32-36
• /
• 2000

Pyrolytic preparations of Ti-Al-N ceramics from three blended precursors were investigated. The precursors were prepared stirring ($HA1N^{i}Pr_m$ and an aminolysis product of $Ti(NMe_2)_4$ with $MeHNCH_2CH_2$NHMe in $C_6/H_6$ . IR and $^1H\;NMR $analyses suggested that essentially no Ti-N-Al bonds were present in the precursors. Pyrolysis of the precursors under $NH_3-N_2$led to the formation of brown solids with ceramic yields of about 30%, and the Ti-Al ratios in the pyrolyzed products were close to those of the precursors. XRD analysis of the pyrolyzed product from the precursor with Ti:Al=5:1 indicated the formation of a NaCl-type compound as the only crystalline phase. Pyrolysis of the precursor with Ti:Al=2:1 led to the formation of AlN besides the major NaCl-type compound. A ceramic composite containing AlN and the NaCl-type compound was formed by pyrolysis of the precursor with Ti:Al=1:2.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.346-351
• /
• 2016

Titanium dioxide ($TiO_2$) films are deposited by atomic layer deposition (ALD) using titanium isopropoxide (TTIP) and $H_2O$ as precursors. The operating instructions for the ALD equipment are described in detail, along with the settings for relevant parameters. The thickness of the $TiO_2$ film is measured, and thereby, the deposition rate is quantitatively estimated to verify the linearity of the deposition rate.

• 한국재료학회지
• /
• 제4권5호
• /
• pp.541-549
• /
• 1994

공침법으로 제조된 비정질 $PbTiO_{3}$전구체의 결정화거동과 구조적 변화를 XRD, 라만스펙트럼, TEM, RDF등으로 조사하였다. 전구체는 이온안정제로 $H_2O_2$혹은 $NH_4NO_3$를 사용하여 제조된 질산납과 사염화티탄의 혼합수용액으로부터 $45^{\circ}C$, pH 9에서 제조되었다. 이온안정제로 $H_2O_2$를 사용한 경우보다 $NH_4NO_3$를 사용하여 제조된 공침물이 더 낮은 온도에서 결정화가 시작되며 결정화의 활성화에너지도 더 작은 값을 가진다. 비정질의 공침물은 transient phase를 거쳐 결정 $PbTiO_{3}$로 변태된다. 비정질 상태의 평균 원자거리는 열처리온도의 증가에 따라 감소한다.

• 분석과학
• /
• 제21권6호
• /
• pp.553-561
• /
• 2008

MWCNT 와 여러 가지 티탄 알콕사이드 전구체를 사용하여 $CNT/TiO_2$ 복합제를 제조하였다. 이들 복합체들은 SEM, FE-SEM, XRD, EDX 및 UV-vis 분광기를 사용하여 종합적으로 분석하였다. UV 조사하에서 MB모델 수용액의 변이에 대한결과로부터 제조된 물질에 대한 광활성을 시험하였다. 마지막으로 MB 제거 실험의 결과에 따르면, 시료 CTOS의 경우 시료 CTIP 및 CTPP의 경우보다 우수한 MB제거 효과를 나타내었다.

• 한국결정성장학회지
• /
• 제28권4호
• /
• pp.166-169
• /
• 2018

$TiO_2$ nanoparticles were prepared under high temperature and pressure conditions by precipitation from titanium tetrachloride ($TiCl_4$) and titanium isopropoxide (TTIP). $TiO_2$ powders were obtained in the temperature range of $150^{\circ}C{\sim}190^{\circ}C$ for 4 h. The microstructure and phase of the synthesized particles were studied by TEM and XRD. TEM and X-ray diffraction pattern shows that the synthesized particles were crystalline. The average sizes of the synthesized particles from titanium tetrachloride and titanium isopropoxide were below 20 nm and 10 nm, respectively. The average size of the synthesized particles increased with increasing reaction temperature. The effects of synthesis parameters, such as the reaction temperature and pH value are discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.222-222
• /
• 2011

Titanium dioxide (TiO2) has a number of applications in optics and electronics due to its superior properties, such as physical and chemical stability, high refractive index, good transmission in vis and NIR regions, and high dielectric constant. Atomic layer deposition (ALD), also called atomic layer epitaxy, can be regarded as a special modification of the chemical vapor deposition method. ALD is a pulsed method in which the reactant vapors are alternately supplied onto the substrate. During each pulse, the precursors chemisorb or react with the surface groups. When the process conditions are suitably chosen, the film growth proceeds by alternate saturative surface reactions and is thus self-limiting. This makes it possible to cover even complex shaped objects with a uniform film. It is also possible to control the film thickness accurately simply by controlling the number of pulsing cycles repeated. We have investigated the ALD of TiO2 at 100$^{\circ}C$ using precursors titanium tetra-isopropoxide (TTIP) and H2O on -O, -OH terminated Si surface by in situ X-ray photoemission spectroscopy. ALD reactions with TTIP were performed on the H2O-dosed Si substrate at 100$^{\circ}C$, where one cycle was completed. The number of ALD cycles was increased by repeated deposition of H2O and TTIP at 100$^{\circ}C$. After precursor exposure, the samples were transferred under vacuum from the reaction chamber to the UHV chamber at room temperature for in situ XPS analysis. The XPS instrument included a hemispherical analyzer (ALPHA 110) and a monochromatic X-ray source generated by exciting Al K${\alpha}$ radiation (h${\nu}$=1486.6 eV).

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2477-2480
• /
• 2014

Thermal degradation of titanium-containing metal-organic frameworks (MOFs; MIL-125 and MIL-125-$NH_2$ at $350^{\circ}C$ for 6 h in air produced $TiO_2$ nanoparticles of ca. 10 nm in diameter. Scanning electron and transmission electron microscope analyses indicated that those nanoparticles were aggregated randomly within each crystalline particle of their MOF precursors. The $TiO_2$ nanoparticles prepared from MIL-125-$NH_2$ exhibited higher activity for the degradation of 4-chlorophenol under visible light.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.511-517
• /
• 2012

Pd/MWCNT/$TiO_2$ composites were synthesized by a sol-gel technique using multi-walled carbon nanotubes (MWCNT), palladium (II) chlorite ($PdCl_2$) and titanium tetrachloride ($TiCl_4$) as the carbon, palladium and titanium precursors. The Pd/MWCNT/$TiO_2$ composites prepared were characterized by BET surface area measurements, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The photocatalytic activity of the composites was evaluated using the degradation of methylene blue (MB) under UV and visible light irradiation as a model.