• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.363-374
• /
• 2018

The Han River serves as an important water resource for the city of Seoul, Korea and in the neighboring metropolitan areas. From the Paldang dam to the Jamsil submerged weir, the 4 water intake stations that are located for the Seoul metropolitan population were under review in this study. Therefore the water quality management in this section is very important to monitor, analyze and review to rule out any safety concerns. In this study, a 3-D hydrodynamic model, EFDC (Environmental Fluid Dynamics Code), was applied to the downstream of the Paldang Dam in the Han River, which is about 23 km in length, to determine issues related to water resource management. The 3-D grid was composed of 2,168 horizontal grids and three vertical layers. In this case, the hydrodynamic model was calibrated and verified with an observed average daily water surface elevation, water temperature and flow rate data for 3 years (2013~2015). The developed EFDC model proved to reproduce the hydrodynamics of the Han River well. The composition ratios of the noted incoming flows at the monitored intake stations for 3 years and their flow patterns in the river were analyzed using the validated model. It was found that the flow of the Wangsuk Stream depended on the Paldnag dam discharge, and it was noted that the composition ratios of the stream at the intake stations changed accordingly. In a word, the Wangsuk Stream moved mainly along the right bank of the Han River under the condition of a normal dam flow. As can be seen, when the dam discharge rate was low, the incidence of lateral mixing was often seen. The scenario analyses were also conducted to predict the transport of conservative pollutants as in the case of a chemical spill accident. Generally speaking, when scenarios were applied, the arrival time and concentration of pollutants at each intake station was thus predicted.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.67-76
• /
• 2006

The reasonable assessment of the shear stiffness of a dredged soft ground and soft clay is difficult due to the soil disturbance. This study addresses the development and application of a new in-situ shear wave measuring apparatus (field velocity probe: FVP), which overcomes several of the limitations of conventional methods. Design concerns of this new apparatus include the disturbance of soils, cross-talking between transducers, electromagnetic coupling between cables, self acoustic insulation, the constant travel distance of S-wave, the rotation of the transducer, directly transmitted wave through a frame from transducer to transducer, and protection of the transducer and the cable. These concerns are effectively eliminated by continuous improvements through performing field and laboratory tests. The shear wave velocity of the FVP is simply calculated, without any inversion process, by using the travel distance and the first arrival time. The developed FVP Is tested in soil up to 30m in depth. The experimental results show that the FVP can produce every detailed shear wave velocity profiles in sand and clay layers. In addition, the shear wave velocity at the tested site correlates well with the cone tip resistance. This study suggests that the FVP may be an effective technique for measuring the shear wave velocity in the field to assess dynamic soil properties in soft ground.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.55-70
• /
• 2018

Recently, as shared transportation services has expanded, integrated mobility services that link personal transportation and public transportation are paid attention. To do this, it is necessary to analyze trip mode chaining behavior. This study analyzed the characteristics of the trip mode chaining behavior using the 2010 travel diary survey in Seoul, and analyzed factors to affect mode choice of trip chaining through the multinomial logit model. The transportation means were classified into passenger cars, city buses, intercity buses, railways, taxis, and others, and 25 trip mode chaining types were identified. Among them, the trip share connected between city bus and railways was the highest. It was also found that the trip mode chaining occurred mainly at commuting and in the morning and afternoon peak. According to the model results, the mode choice of trip chaining is significantly influenced by individual attributes (sex and age), household attributes (car ownership and income), trip attributes (trip purpose, trip time and trip length), and arrival area attributes (number of subway lines and bus lines, ratio of commercial area, land use mix and central region).

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.139-150
• /
• 1998

Due to development of science and telecommunication with wide-spread computer supply, it could be done through computer automatically instead of manpower-work for paper transportation & paper approval. It is developed to so-called Factory Automation. Further, it is developed to Office Automation. Trading companies & concerned trade authorities are interested in Trade Automation that such technique is applied to trade work. Generally, Trade Automation means to realize paperless trade by exchanging electronic papers through inter-computers after concerned trade operators transformed various papers to electronic papers that computer could read. In case Trade Automation fix in the trade business, it is expected one of innovations among traditional paper work of trade business, namely without going import-export authorities, Customs office, Banks. Shipping companies, Marine insurance companies on hand-carrying papers, it could be fast, simple, correct to finish every trade procedures such as commercial business, foreign currency, customs clearance, transportations, insurance. terms of payment, etc., with Electronic Data Interchange through computer facilities. Especially, telecommunication for trade form could be helpful to proceed trade paper with one-run-method Further we can anticipate 6 effects for Trade Automation as belows : First, as explained just above articles, with completion for Trade Automation, every trade procedures can be done by computer. so, time to work can be diminished. namely. logistics cost including accessory costs for trade procedures can be saved much. Second, viewing to private enterprise, effect of Office Automation can be maximized and rapid, correct exchange for various trade informations could raise efficiency of enterprise management establishing rational production, storage, transportation and could raise competition improving standard for consumers's service. Third, establishing Trade Automation systems makes it easier piling-up of harbor cargo by pre-transmission of electronic paper & trade informations make it possible to finish customs clearance in advance and can be dispatched upon cargo arrival. Fourth, most of concerned trade authorities such as import-export approval office. financial authorities, transport & insurance companies concentrated in Metropolitan area(Seoul, In -Cheon, Kyung-Ki). Therefore, in case Trade Automation could be realized. it is possible to proceed trade business instantly in every country area by computer facilities. Also. it contribute well-balanced development for suburb. region area by suburb dispersion of trading companies. Fifth, on the way to Trade Automation establishment & its enlargement process. producing enormous demand for over-all telecommunication such as hardware. software. network makes opportunity to progress telecommunication industry & concerned industries. Finally. Trade Automation accelerate change of employment structure leading unnecessary labors on the industries of office & logistics to manufacturing area.

• Journal of Trauma and Injury
• /
• v.25 no.4
• /
• pp.166-171
• /
• 2012

Purpose: In patients with traumatic hemoperitoneum or pelvic bone fracture who underwent angiography and embolization, we want to find the prognostic factors related with mortality. Methods: Patients(333 patients) who visited our hospital with traumatic injury from March 2008 to April 2012 were included in this study. Only 37 patients with traumatic hemoperitoneum or pelvic bone fracture underwent angiography and embolization. A retrospective review was conducted, and Glasgow coma scale (GCS), Revised trauma score (RTS), Injury severity score (ISS), initial laboratory finding and time interval, the amount of transfusion from the arrival at the ER to the start of embolization, and the vital signs before and after procedure were checked. Stastical analysis was conducted using the Chi square and Mann-Whitney U test. Results: In univariate analysis, the amount of transfusion, the base deficit before procedure, the systolic blood pressure before and after the procedure, the GCS, the RTS and the ISS were significantly associated with prognosis. In the multivariate analysis, the ISS and the base deficit had significant association with prognosis. Of the 37 patients who underwent angiography and embolization, 31 patients needed not additional procedure (Group A) while the other 6 patients needed an additional procedure (Group B). After procedure, a statistically significant higher blood pressure was observed in Group A than in Group B. As to the difference in blood pressure before and after the procedure, a statistically significant decrease in systolic blood pressure was observed in Group B, but an increase was observed in Group A. Conclusion: In traumatic hemoperitoneum or pelvic bone fracture patients who underwent angiography and embolization, GCS, ISS, RTS, transfusion amount before the procedure, initial base deficit and systolic blood pressure were factors related to mortality. When patients who underwent angiography and embolization only were compared with patients who underwent re-embolization or additional procedure after the first embolization, an increase in systolic blood pressure after embolization was a prognostic factor for successful control of bleeding.

• Journal of Industrial Convergence
• /
• v.18 no.1
• /
• pp.25-33
• /
• 2020

South Korea entered an aged society phase in 2017 with the elderly accounting for 14% or higher of the entire population. It is expected to enter a super-aged society phase in 2026. The mobility handicapped, including the disabled and the elderly, are expected to grow continuously, and the demand for transport service for the mobility handicapped will definitely increase further. Thus, there is thus a need for various research to increase the utilization rate of low-floor buses among the mobility handicapped. This study analyzed the locations of getting on and off transportation means, time of departure and arrival, purpose of use, and frequency of use by the day among the mobility handicapped by making use of the information about their use of special transport service run by the mobility support center for the mobility handicapped. The study then proposed a method of selecting locations for low-floor bus stops to reflect the distribution and need of getting on and off transportation means among the mobility handicapped with such spatial analysis techniques as geocoding, overlapping analysis, buffer analysis, and generate tessellations. Finally, the study selected 228 locations for low-floor bus stops in Cheonan and reported a need to add 35 low-floor bus stops after eliminating the ones where the locations overlapped the old ones.

• Journal of Korea Water Resources Association
• /
• v.47 no.10
• /
• pp.879-889
• /
• 2014

In this study, to estimate loss of life considered flood characteristics using the relationship derived from analysis of historical dam break cases and the factors determining loss of life, the loss of life module applying in LIFESim and loss of life estimation by means of a mortality function were suggested and applicability for domestic dam watershed was examined. The flood characteristics, such as water depth, flow velocity and arrival time were simulated by FLDWAV model and flood risk area were predicted by using inundation depth. Based on this, the effects of warning, evacuation and shelter were considered to estimate the number of people exposed to the flood. In order to estimate fatality rates based on the exposed population, flood hazard zone is assigned to three different zones. Then, total fatality numbers were predicted after determining lethality or mortality function for each zone. In the future, the prediction of loss of life due to dam break floods will quantitatively evaluate flood risk and employ to establish flood mitigation measures at downstream applying probabilistic flood scenarios.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.305-315
• /
• 2011

A total of 864 measurements for P- and S- wave velocity of acrylic and stainless steel core samples have been performed with respect to their lengths and axial load applied. S-wave velocity measurement was much harder than P-wave velocity, so that it showed higher deviation in measured S-wave velocity with respect to repeated measurement, length of the cores, and the axial load applied. Velocity measurements for acrylic cores showed more stable and less than half of the variation between the measurements than the stainless steel cores. This seems to be come from better coupling between the transducers and acrylic cores than stainless cores, and from larger value of the first arrival time in a similar system noise environments. From the analysis of the 864 measurements, it is recommended that the length of the core be 60 ~ 90 mm, axial load between 20 kg (27.7 $N/cm^2$) and 30 kg (41.6 $N/cm^2$) for measurement of wave velocity of the acrylic and stainless steel cores. Especially for measuring S-wave velocity of stainless steel core, core length should be less than 50 mm, otherwise it will be affected by mode conversion or others. These results can be used in measurement and correction for system delay in wave velocity measurement for rock cores.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.535-539
• /
• 2010

This paper include to study DoA(Direction of Arrival) for radio collection and monitoring system. The direction finding calculated by applying the CVDF (Correlation Vector Direction Finding) algorithm for the five circular dipole antenna over V / UHF band. To improve the accuracy of direction finding by applying CVDF algorithm needs to obtain ideal phase difference each antennas. However, a circular array antenna phase difference pattern may be distorted on a specific frequency band or to particular direction. The effect of installing each array antennas circularly and the effect of the interference of center pole (located in the center of a circular array antenna mount) may make the distortion of phase pattern. If you use an active antenna instead of passive antenna to obtain good sensitivity, you would measure the more distortion. This paper propose how to change combination of antennas to measure the phase in real-time and how to use antenna beam patterns for minimizing the degradation phenomena at applying simple CVDF algorithm and increasing the direction finding capability.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.153-162
• /
• 2019

Rapid variations in the geometry (i.e., thickness) of the refractor and low velocities affect greatly the imaging of the reflectors of land seismic data. Conventional solutions to obtain the weathering models utilizes first break picking method, which requires time consuming steps and causes the human error in picking the first arrivals. A new interferometric approach (interferometric refraction statics, IRS) which utilizes the first arrival signal (S/N enhanced by refraction convolution stack) instead of first break picking, is tested in this study to the synthetic data from the velocity structure provided by surface geophysics (refraction, MASW) and borehole geophysics (tomography, SPS logging) for the Cheongju granitic bodies. The results of IRS approach are found to be better than the ones from conventional first break picking in terms of continuities and horizontal resolution of the reflectors. The unresolved long-wavelength statics in brute stack are much removed by IRS weathering correction and the overlying refractors (the base of shallow weathering zone) are incidentally delineated in the refraction convolution stack.