• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1935-1940
• /
• 2016

본 논문에서는 RC 시정수 회로를 포함하는 비교기를 이용해 보조 전하펌프를 제어하여 루프 필터 출력 전압 변동 폭을 최소화 하는 위상고정루프(PLL)를 제안하였다. 루프 필터의 출력 전압변화는 작은 시정수 값을 가지는 RC와 큰 시정수 값을 가지는 RC를 통해 비교기의 입력으로 각각 전달된다. 작은 시정수를 가지는 RC는 루프 필터의 신호의 변화를 빠르게 전달하는 반면 큰 시정수를 가지는 RC는 루프 필터의 신호를 매우 느리게 전달하여 일정한 크기의 전압과 같이 동작한다. 비교기의 출력 신호는 보조 전하펌프를 제어하고, 이는 전압제어발진기(VCO)의 입력 전압 변동 폭을 줄여준다. 그러므로 제안한 위상고정루프는 위상 잡음이 많이 제거된 신호를 생성한다. 제안된 위상고정 루프는 1.8V의 공급전압에서 0.18um CMOS 공정의 파라미터를 이용하여 Hspice로 시뮬레이션을 수행하고, 동작을 검증하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제29권12호
• /
• pp.640-647
• /
• 2002

본 논문에서는 에지 가시성에 관련된 문제를 재구성 가능한 메쉬(RMESH)에서 상수 시간에 해결하는 것을 고려한다. 에지 가시성에 관련된 기본적인 문제들로 다음의 세 가지 문제를 살펴볼 수 있다. 첫째, 주어진 다각형이 어떤 에지로부터 가시적인가를 판별하라. 둘째, 주어진 다각형을 볼 수 있는 모든 에지를 구하라. 셋째, 주어진 다각형에서 어떤 에지로부터의 가시적인 영역, 즉, 가시성 다각형을 구하라. 이들 문제를 상수 시간에 해결하기 위하여 본 논문에서는 두 에지 사이의 가시성에 관한 다음의 문제를 고려한다: 단순 다각형 P의 두 에지 e와 f가 주어져 있을 때 e로부터 가시적인 f의 영역을 구하라. 본 논문에서는 이 문제를 N-N RMESH에서 상수 시간에 해결하는 알고리즘을 제시한다. 여기서 N은 P의 정점의 개수이다. 이 알고리즘을 이용하면 에지 가시성에 관련된 기본적인 문제들을 모두 RMESH에서 상수시간에 해결할 수 있다. 특히, 세 번째 문제를 N-$N_2$ RMESH에서 상수 시간에 해결하는 것이 가능하다.

• 조명전기설비학회논문지
• /
• 제29권9호
• /
• pp.96-102
• /
• 2015

This paper presents battery charging method using 3-phase AC-DC boost converter. General battery charging method is that charging the battery voltage to the reference voltage according to the constant current(CC) control, when it reaches the reference voltage, charging the battery fully according to the constant voltage(CV) control. However, battery chaging time is increased because of the battery impedance, constant current charging section which shoud take the large amount of charge is narrow, and constant voltage charging section which can generate insufficient charge is widen. To improve this problem, we proposes the method to reduce the charging time according to the SOC(State of Charge) estimation using battery impedance.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.22-30
• /
• 2000

The present article deals with comparisons of published liquid breakup models for diesel sprays to analyze the influence of breakup models on various spray parameters. The three different models tested in this study are the surface wave instability (Wave) model, the Taylor analogy breakup (TAB) model, and the drop drag model(DDM). The numerical results using these models are compared with several experimental data to assess the prediction capabilities of breakup models. Additional task in this study is to investigate effects of the breakup time constant in the Wave model on the spray parameters because the spray behavior is sensitive to the breakup time constant. It is seen that there is uncertainly about the breakup time constant indicating that the suitable acceptance of the constant is important, and the TAB model generally shows significant under-prediction of Sauter Mean Diameter(SMD). In addition, it may be indicated that differences between the DDM and Wave model are not significant, showing that the DDM may be suitable for air-assisted atomization rather than pressure atomization.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권3호
• /
• pp.39-46
• /
• 2014

Hydraulic conductivity is an important parameter, representing permeable property of the groundwater in aquifers, in the issues of groundwater development, groundwater contamination, and groundwater flow, etc. We estimated a relationship between hydraulic conductivity and electrical properties (formation factor, chargeability, and time constant) of silty sand in the laboratory. For this study, we conducted grain size analysis, constant head permeameter test, and measured electrical resistivity and spectral induced polarization of silty sand samples collected from the riverside alluvium of the Nakdong River in Nogok-ri area, Dasan-myeon, Goryeong-gun in Gyeongbook Province, Korea. In the laboratory test, we used soil samples of approximately uniform porosity with 0.5% error range, and kept the electrical resistivity of pore water with 100 ohm-m. As a result, the relationship between effective particle size and hydraulic conductivity agrees fairly well with the existing empirical formulas. Hydraulic conductivity was correlated with formation factor, chargeability, and time constant: hydraulic conductivity increased with increasing formation factor and time constant as well as with decreasing chargeability.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.149-154
• /
• 1991

The one of the important problems in the design of queueing systems is the decision of the order of service stations. The object of this problem is the decision of the order that minimizes the expected sojourn time per customer in the given arrival process and service time distributions. In this paper, the tandem queueing system in series is studied with the emphasis on the optimal order of the tandem queueing system which has three stations with single servers. In one system, customers arrive at the first station with Poisson process. This system is composed of service stations with a constant, a general distribution and a Exponential distribution is studied. To select the optimal order after the orders of each pair of two stations is decided, it is compared the two orders of system. With this results, total expected delay of the systems which has three stations is compared. The result is the best that service station with constant time is on the first place, then the service station with general distribution and the service station with Exponential distribution is followed. And the other system is consist of service stations with a constant and two probabilistic distributions. In this case, two probabilistic distributions has a non-overlapping feature. It is the optimal order that the service station with constant time is on the first place then the service station with longer service time and the service station with shorter service time is followed.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.676-684
• /
• 2000

In this study, behavior of $C_t$ which is a well-known fracture parameter characterizing creep crack growth rate, is investigated for weld interface cracks. Finite element analyses were per formed for a C(T) specimen under constant loading condition for elastic-plastic-creeping materials. In modeling C(T) geometry, an interface was employed along the crack plane which simulated the interface between weld and base metals. The $C_t$ versus time relations were obtained under various creep constant combinations and plastic constant combinations for weld and base metals, respectively. A unified $C_t$ versus time curve is obtained by normalizing $C_t$ with $C^*$ and t with $t_T$ for all the cases of material constant variations.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.547-552
• /
• 2000

The objective of this paper is to present a modified fractional step method of keeping a constant mass flow rate in spatially periodic flows, because original fractional step methods do not precisely keep the mass flow rate constant in time. In the modified method, the mean and fluctuating pseudo-pressure gradients are separately obtained at each time step. This method is successfully applied to channel and pipe flows and shown to be suitable for maintaining a constant mass flow rate in time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.59.5-59
• /
• 2002

In this paper, we present a robust controller design method that can not only deal with the constant time delay plant but also an uncertain time delay one. For a constant time delay plant. The proposed DTC can independently adjust the set response and the disturbance response without any stability constraint. And in the uncertain time delay case, one can process the control design step with uncertainty norm bound. To verify real effectiveness, theoretical analysis and simulation results are given.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1173-1177
• /
• 2006

Using an inner P controller, a tuning rule useful for processes with wide ratios of time delay over time constant is proposed. Internal model control method and pole assignment method are utilized. It can be used for processes with wide range of the ratio of time delay to time constant without incovenience to choose different tuning rules.