• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.961-963
• /
• 2012

The sound source localization system is used to some area such as robotic system, object localization system, guarding system and medicine. So time delay estimation and angle estimation of sound direction are studied until now. These days time delay estimation is described in LabVIEW which is used to create innovative computer-based product and deploy measurement and control systems. In this paper, the development of signal monitoring platform is presented for sound source localization. This platform is designed in virtual instrument program and implemented in two stages. In first stage, data acquisition system is proposed and designed to analyze time delay estimation using cross correlation. In second stage, data obtaining system which is applied and designed to monitor analog signal processing is proposed.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.684-693
• /
• 2011

Measurement time delay in the transfer alignment is very important. It has been well known that the time delay degrades the alignment performance and makes some navigation errors on the transfer alignment of slave INS(SINS). Therefore there are many schemes to eliminate that time delay but the compensation technique through the estimation by Kalman filter through modeling the time delay as a random constant is generally used. In the case of change over measurement time delay or the large measurement time delay, estimation performance in the existing compensation technique is degraded because model of time delay is not correct any more. In this paper, we propose the method to keep the time delay almost constant even though in the abnormal communication state and very small through feedback compensation using double buffer. Double buffer consists of two moving window to temporarily store measurements from master INS and slave INS in real time.

• 제어로봇시스템학회논문지
• /
• 제4권3호
• /
• pp.295-300
• /
• 1998

In this paper, we point out the possibility of the divergence of control input caused by the estimation error of delay-time when general iterative learning algorithms are applied to a class of linear dynamic systems with time-delay in which delay-time is not exactly measurable, and then propose a new type of iterative learning algorithm in order to solve this problem. To resolve the uncertainty of delay-time, we propose an algorithm using holding mechanism which has been used in digital control system and/or discrete-time control system. The control input is held as constant value during the time interval of which size is that of the delay-time uncertainty. The output of the system tracks a given desired trajectory at discrete points which are spaced auording to the size of uncertainty of delay-time with the robust property for estimation error of delay-time. Several numerical examples are given to illustrate the effeciency of the proposed algorithm.

• 한국통신학회논문지
• /
• 제37권2A호
• /
• pp.119-127
• /
• 2012

본 논문에서는 대역 확산 (spread spectrum) 방식의 실시간 위치 추적 시스템 (RTLS: real-time locating system)을 위한 초 분해능 지연 시간 추정 (super-resolution time delay estimation) 알고리즘을 개발하고 다중 경로 환경에서 성능을 분석한다. 기존의 코릴레이션 방식은 주변에 장애물이 없는 line-of-sight (LOS) 환경에서는 비교적 정확한 지연 시간 추정이 가능하나 지연 시간의 차이가 한 칩 이내인 근접 다중 경로 환경에서는 성능이 급격히 저하되는 문제점이 있다. 따라서 본 논문에서는 도래각 추정에 이용되는 MUSIC 알고리즘을 이용하여 근접 다중 경로 환경에서도 신호의 지연 시간을 추정할 수 있는 초 분해능 지연 시간 추정 알고리즘을 개발하고 이를 ISO/IEC 24730-2.1 RTLS 시스템에 적용하여 성능을 분석한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.5-10
• /
• 2005

We deal with the sliding mode control using the time delay estimation. The time delay estimation is able to weaken the need for obtaining a quantitative plant model analogous to the real plant so the sliding mode control with a time delay estimation (SMCTE) is very suitable for plant such as SMA actuators whose quantitative model is difficult to obtain. We have already studied the application of the time delay control (TDC) to SMA actuators in other literature. Based on the previous study on the TDC, we developed the gain tuning method for the SMCTE, which results were nearly the same as the TDC. With respect to the step response, the SMCTE proved its predominance in a comparison with other control schemes such as the PID control and the relay control. As well as the contribution of the above control methodology, the model identification for SMA actuators has also been studied. The dynamics for an SMA actuator was newly derived using the modified Liang's model. The derived dynamics showed a continuity at the change of the phase transformation process but the original Liang's model could not.

• 한국음향학회지
• /
• 제40권5호
• /
• pp.452-459
• /
• 2021

서로 떨어져 설치된 두 개의 음향 수신기에 도달하는 신호의 상호 지연 시간을 추정하는 것은 실내 음향과 소나 등에서 목표물 위치 추정 문제나 추적 등 여러 방면에서 쓰이고 있다. 시간 지연을 구하는 방법에서는 두 수신 신호 사이의 상호 상관을 이용한 방법으로 대표되는 비 파라메트릭 방법과 시스템 인식을 기반으로 하는 파라메트릭 방법이 있다. 본 논문에서는 파라메트릭 방법에 기반을 둔 시간 지연 추정 방법을 제안한다. 특히 음향 수신기에 잡음이 부과되는 것을 고려한 방법을 제안한다. 그리고 백색 잡음 및 잔향 환경에서 기존의 일반 상호 상관법과 적응 고유치 분석법과 비교를 통해서 새로 제안한 알고리즘이 더 우수함을 확인한다.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1075-1086
• /
• 2004

In this paper, Time Delay Control(TDC) for robot manipulators is analyzed and its problems are founded. In order to remedy the problems, the enhanced controller is proposed and analyzed. The effect of friction associated with TDC is reported and its cause is presented. Through the analysis, simulation and experiment, it is shown that the friction effect causes serious degradation in control performance and that it is a result of the error of Time Delay Estimation(TDE) in TDC. In order to remedy the problems, TDC combined with Internal Model Control(IMC) concept is proposed. The proposed compensator is effective enough to handle the bad effect of friction, and is so simple and efficient as to match positive attribute of TDC. The simulation and experimental results show the effectiveness of proposed controller against the friction of the robot manipulators.

• 한국환경과학회지
• /
• 제23권4호
• /
• pp.605-613
• /
• 2014

In this work, the delay time for groundwater recharge was estimated by comparing simulated recharges by means of SWAT(Soil and Water Assessment Tool) model and WTF(Water Table Fluctuation) method. The delay time for groundwater recharge means that the time when the water from rainfall travelled through vadose zone just after getting out of soil zone bottom. As measuring this delay time is almost impossible, we used to compare the estimated values from modeling(SWAT) and analytic method(WTF). The test site is Hancheon watershed which has 8 groundwater measurement stations. The results show that the altitude has a linear relationship with the estimated delay time values. To validate these results, we conducted corelation analysis between transformed groundwater levels and observed ones. The results showed that computed groundwater levels have good corelation($R^2$=0.97, 0.87, respectively). The estimated delay time would be used for the groundwater behaviour characteristics in vadose zone. As recharge rates vary according to the height, the delay time is thought to be an import variable for the proper groundwater recharge estimation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1635-1638
• /
• 1997

A measurement of conduction veloctiy of the action potentials along the muscle fibres has been applied to various diagnosis. When we measure muscle fiber conduction velocity, it occurs that not only change of conduction velocity but alos inclusion of mipulse component by physiological and experimental reason. So, robuster time delay estimation algorithm than general methods[1] is needed to find correct time delay form these signals. In this paper we, propose new time delay estimation algorithms, robust in impulsive noise, by using characteristic of .alpha.-stable distribution whcih defines impulsive noise well. Then we apply proposed algorthms to measure muscle fiber conduction velocity and compare them with other studies.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.165-168
• /
• 2000

A fast estimation method using wavelet transform for a time delay system is proposed. Main point of this method is to get the wavelet transform of the correlation between the input signal and delayed signal using transformed signals. But wavelet transform using Haar wavelet functions has basis with different phases and can offers a bisection method to estimate a time delay of a signal. Selective computation of the transform of correlation is performed and the computational complexity is reduced. Computational order of this method is O(N log N) and it is much love. than a simple correlation esimation when the length of signal is long.