• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 춘계학술대회 학술발표 논문집
• /
• pp.4-7
• /
• 2001

A stable TSK-type FLC can be designed by the method of Parallel Distributed Compensation (PDC), but in this case, solving the LMI problem is not a trivial task. To overcome such a difficulty, a Time-Delay based FLC (TDFLC) is proposed. TSK-type TDFLC consists of Time-Delay Control (TDC) and Sliding Mode Control (SMC) schemes, which result in a robust controller basaed upon an integral sliding surface.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1823-1832
• /
• 2004

In this paper, we proposed a TDC based F/T sensorless active compliance control algorithm for a rehabilitation robot (KARES II). The preference of compliance of the disabled is presented by clinical testing at Korea National Rehabilitation Center with the disabled. The KARES II was designed to work 12 predefined tasks which are very essential for helping the disabled. Among the tasks, some contact tasks between the robot and the disabled exist. Therefore, TDC based F/T sensorless compliance control algorithm is developed for these tasks without additional cost. We verified the proposed algorithm with experiment. Also for the practical use, suitable compliance for contact tasks is chosen by clinical testing at Korea National Rehabilitation Center.

• 드라이브 ㆍ 컨트롤
• /
• 제15권3호
• /
• pp.21-28
• /
• 2018

We propose a tension controller based on a time-delay estimation (TDE) technique for a winding machine. Firstly, we perform the necessary calculations to derive a mathematical model of the winding machine. In this sense, it is revealed that the roll radius of the winding machine is characteristically seen to be increasing or decreasing during the winding process. That being said, it is noted that the parameters of the winding machine are coupled and constantly changing during this process. Understandably then, it is noted that the model is shown to be nonlinear and time-varying. Secondly, we propose the way to apply the TDE based controller which is the so-called Time-delay Control (TDC). The TDC utilizes the time-delayed information intentionally to compensate the nonlinear and time-varying characteristics. As we have seen, the proposed controller consists of two parts: one is a TDE component, and the other is an error dynamics component which is defined by a user. In a computer simulation based on the Matlab/Simulink program, the proposed controller is compared with a conventional PID controller, which is widely used in the tension control of the winding machine. The proposed controller reduces the incidence of overshoot and steady-state error in the tension control, as compared to the conventional PID controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.299-304
• /
• 1998

An improved nonlinear speed control of a permanent magnet synchronous motor(PMSM) is presented. A quasi-linearized and decoupled model including the influence of parameter variations and speed measurement error on the nonlinear speed control of a PMSM is derived. Using this model, to overcome the drawbacks of conventional nonlinear control scheme, the improved nonlinear control scheme that employs time delay control(TDC) is proposed. To show the validity of the proposed control scheme, simulation studies are carried out and compared with the conventional control scheme.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.701-705
• /
• 2014

This article presents a comparison among several yaw and roll motion controllers for vehicle rollover prevention. In the previous research, yaw and roll motion controllers can be independently designed for rollover prevention. Following this idea, several yaw and roll motion controllers are designed and compared in terms of rollover prevention. For the yaw motion control, PID, LQR, SMC (Sliding Mode Control) and TDC (Time-Delay Control) are adopted. For the roll motion control, LQR, LQ SOF (Static Output Feedback) control, PID, and SMC are adopted. To compare the performance of each controller, simulation is performed on a vehicle simulation package, CarSim$^{(R)}$. From simulation, TDC and LQ SOF are the best for yaw and roll motion control, respectively.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권3호
• /
• pp.149-156
• /
• 2000

Time delay observer (TDO), thanks to the time delay control (TDC) concept, requires little knowledge of a plant model, and hence is easy to design, robust to parameter variation and computationally efficient, yet can reconstruct states rather reliable for nonlinear plant. In this paper, we propose an improved version of TDO that solves two problems inherent in TDO as follows: TDO displays large reconstruction errors due to low-frequency uncertainty and has some restrictions on selecting its gains. By introducing a low pass filter and a state associated with it, we obtain an enhanced time delay observer (ETDO). This observer turns out to have smaller reconstruction errors than those of TDO and not to have any restriction on selecting its gains, thereby solving the problems. Through performance comparison by transfer function and simulation, we validate the analysis results of two observers (TDO and ETDO) and evaluate the performances. Finally, through experiments on BLDC motor system, the analysis results are clearly conformed.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권12호
• /
• pp.575-583
• /
• 2001

It is hard to obtain good robust performance and robust stability for uncertain and time-varying system. The robust 2-DOF controller is frequently used to obtain the desired response and the good robustness. Two controllers can be independently designed. Generally, one controller reduces sensitivity to parameter variations, nonlinear effects, and other disturbances. On the other hand, the other controller reduces the error between the desired command and output. In this paper, the various robust perfect MFCs(model-following controllers) combined with TDC(Time Delay Control) are designed, and the imperfect stable MFC combined with TDC and SMC(Sliding Mode Control) is proposed. These controllers are based on the method of designing robust 2-DOF controllers for dynamic system with uncertainty. The performance of the proposed imperfect sable MFC has been evaluated through computer simulations. The simulation results indicate that the proposed controller shows the excellent performance characteristics for an overhead crane with uncertain and time-varying parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.740-743
• /
• 1997

Reference models are used in many control algorithms for improvement of transient response characteristics. They provide desired trajectories that the plant should follow. Most control systems have bounded control inputs to avoid saturation of the plant. If we design reference models that do not account for limits of control inputs, control performance of the system may be deteriorated. In this paper, therefore, the way of determining variable reference models for TDC(time delay control) technique is proposed. The variable reference model is determined based on the information of bounded control inputs and reference inputs. This proposed method is also verified by application to the position control experiment using the BLDC motor.

• 한국지능시스템학회논문지
• /
• 제11권4호
• /
• pp.347-353
• /
• 2001

본 논문은 기존의 시간 지연 제어 기법을 이용하여 TSK 모델 퍼지 제어 시스템의 안정화에 적용하는 방법을 제시한다. TSK 모델 퍼지 시스템이 기존의 PDC 방법에 의하여 안정화되어지는 경우 발생하게 되는 LMI 문제를 피하기 위하여 시간 지연 방법에 의한 새로운 안정화 조건이 다루어진다. 제시되어진 방법은 mass-spring-damper 시스템에 적용되어 적용가능성이 평가된다.

• 항공우주시스템공학회지
• /
• 제18권1호
• /
• pp.29-36
• /
• 2024

최근 도심항공모빌리티(Urban Air Moility, UAM)의 개념이 미래항공모빌리티(Advanced Air Mobility, AAM)으로 확장되면서 틸트로터형 수직 이착륙기에 관한 연구개발이 활발하다. 틸트로터의 경우 수직비행과 수평비행 사이에 천이비행을 하게 되는데 천이비행 구간의 비행 안정성을 확보하기 위해 블레이드 피치각 제어시스템을 활용할 수 있다. 또한 개별 블레이드 제어(Individual Blade Control, IBC)를 통하여 천이비행 구간 동안 발생하는 소음 및 진동을 감소시킬 수 있다. 본 논문에서는 전기-기계식 구동기 기반 블레이드 피치각 제어시스템의 개별 블레이드 제어를 위한 외란 관측기와 시간 지연제어기를 설계하고 수치 시뮬레이션을 통해 설계한 제어기들의 성능을 비교분석한다.