• 펄프종이기술
• /
• 제48권3호
• /
• pp.14-22
• /
• 2016

Pulping is a stage that can change fibrous raw materials into pumpable slurry. Recovered paper can be defibrated to individual fibers by shear stress generated by rotation of a rotor and water. Disintegration of recovered paper is more complicated than that of chemical pulp. When disintegration of recovered paper is poor, screening and cleaning efficiency will be worse and properties of paper will also be deteriorated. Therefore, pulping is an important treatment for improvement of availability of recovered paper and process runnability. In this study, degrees of disintegration of KOCC obtained from a linerboard mill was analyzed with a pilot-scale screen. Flake removal of KOCC slurry was performed by a pilot screen. Simple pumping action gave a positive effect on disintegration of KOCC. After pumping for 10 minutes, paper strength increased without the change of water retention value and fibrillation of KOCC slurry. This phenomena can be explained by modification of hornified surface of KOCC fibers by shear stress generated by pumping. Consequently, disintegration efficiency of KOCC can be enhanced by control of retention time at pulper or an agitation power at chests of papermaking process.

• 전산구조공학
• /
• 제9권1호
• /
• pp.141-149
• /
• 1996

부구조화에 근거한 대형 구조의 효율적 근사재해석방법을 제시한다. 대형 구조시스템의 설계최적하에 있어서 가장 큰 문제는 반복되는 해석과 설계시에 드는 많은 계산비용 및 시간이다. 따라서 본 연구에서는 설계 최적화문제의 주요한 도구의 하나인 근사화기법에 근거한 몇가지 재해석방법을 비교.분석하여 효율적 구조재해석 방법을 제시하였다. 대형 구조에 대한 효율적 해석 방법의 하나인 부구조화의 틀에 테일러급수전개와 차원축소방법을 결합한 이 재해석기법은 반복되는 거동해석에 효율적일 뿐아니라, 설계민감도 벡터를 이용하기 때문에 최적설계에도 많은 잇점을 제공한다. 본 알고리즘을 트러스 구조에 적용하여 효율적 및 타당성을 검증하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.24.1-24.1
• /
• 2010

In practical operation, the exposed surfaces may get dirty thus degrade the performance of devices. So the combination of self cleaning and antireflection is very desirable for use in outdoor photovoltaic and displaying devices, self cleaning windows and car windshields. For the purpose of self cleaning, the surface needs to be either superhydrophobic or superhydrophilic. However, in practice AR in the visible region and self cleaning are a pair of competitive properties. To satisfy the requirements for superhydrophobic or superhydrophilic surfaces, high surface roughness is required. But it usually cause severely light scattering. Photo-responsive coatings (TiO2, ZnO etc.) can lead to superhydrophilic. However, the refractive indices are high. Thus for porous structure, controlling pore size in the underwavelength scale to reduce the light scattering is very crucial for highly transparent and self cleaning antireflection coating. Herein, we demonstrate a simple method to make high performance broadband antireflection layer on the glass surface, by "carving" the surface by hot alkali solution. Etched glass has superhydrophilic surface. By chemical modification, it turns to superhydrophobic. Enhanced transparency (up to 97%) in a broad wavelength range was obtained by short time etching. Also antifogging effect has been demonstrated, which may offer advantage for devices working at high humidity environment or underwater. Compositional dependence of the properties was observed by comparing three different commercially available glasses.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.960-965
• /
• 2014

Transmission loss of specimen is calculated by measuring energy of incident and transmission and using reverberant room of large size. But normal measurement of transmission loss has trouble because it is actually demanded that large area and specimen of certain size is satisfied with condition of diffused sound field. Especially, in case of mechanical component, interested frequency band is mid-frequency band between 500 ~ 2k Hz, and it is used to be available to minimize a reverberation chamber under conditions satisfying acoustic one because production of specimen for transmission loss measurement has limit. But, as in semi-reverberation room, it is difficult to satisfy condition of diffuse sound field and modification factor is applied to complement that. Correction factor when measuring transmission loss using semi-reverberation chamber is required accuracy because it works as main factor determining reliability of reuslts on transmission loss. In this study, it is analyzed that an effect on correction factor based on varying materials and sizes of specimens in order to deduction of it. Also It is confirmed that applied by elicited correction factor with actual railway vehicle's floor has reliability.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1394-1401
• /
• 2007

안전한 접근제어는 많은 수의 사용자와 정보자원을 가지고 있는 대규모의 조직, 정보시스템에서 매우 중요한 관심사이다. 많은 경우에 시스템 개발자들은 응용 시스템의 일부로서 접근제어 모듈을 구현해야 한다. 이러한 방식은 접근제어 모듈의 수정을 어렵게 하고, 새로운 응용 시스템을 개발할 때마다 반복적으로 접근제어 모듈을 개발해야 하는 문제가 있다. 본 논문에서는 Java를 사용하는 개발 환경을 위한 접근제어 Java API 라이브러리의 구현에 대해 제시한다. 개발자들은 제안된 라이브러리를 활용하여 쉽게 접근제어 모듈을 구현할 수 있다. 제안된 라이브러리는 주요 접근제어 모델뿐만 아니라 도메인 기반, 객체 중심의 접근제어와 같은 새로운 모델도 지원한다. 또한 여러 접근제어 모델을 동시에 적용할 수 있는 기능을 포함하고 있다.

• Journal of Microbiology and Biotechnology
• /
• 제24권6호
• /
• pp.843-853
• /
• 2014

In the context of artificial groundwater recharge, a reactive soil column at pilot-scale (4.5 m depth and 3 m in diameter) fed by treated wastewater was designed to evaluate soil filtration ability. Here, as a part of this project, the impact of treated wastewater filtration on soil bacterial communities and the soil's biological ability for wastewater treatment as well as the relevance of the use of multi-bioindicators were studied as a function of depth and time. Biomass; bacterial 16S rRNA gene diversity fingerprints; potential nitrifying, denitrifying, and sulfate-reducing activities; and functional gene (amo, nir, nar, and dsr) detection were analyzed to highlight the real and potential microbial activity and diversity within the soil column. These bioindicators show that topsoil (0 to 20 cm depth) was the more active and the more impacted by treated wastewater filtration. Nitrification was the main activity in the pilot. No sulfate-reducing activity or dsr genes were detected during the first 6 months of wastewater application. Denitrification was also absent, but genes of denitrifying bacteria were detected, suggesting that the denitrifying process may occur rapidly if adequate chemical conditions are favored within the soil column. Results also underline that a dry period (20 days without any wastewater supply) significantly impacted soil bacterial diversity, leading to a decrease of enzyme activities and biomass. Finally, our work shows that treated wastewater filtration leads to a modification of the bacterial genetic and functional structures in topsoil.

• Journal of Ginseng Research
• /
• 제42권2호
• /
• pp.199-207
• /
• 2018

Background: Ginseng is a well-known traditional Chinese medicine that has been widely used in a range of therapeutic and healthcare applications in East Asian countries. Microbial transformation is regarded as an effective and useful technology in modification of nature products for finding new chemical derivatives with potent bioactivities. In this study, three minor derivatives of ginsenoside compound K were isolated and the inducing effects in the Wingless-type MMTV integration site (Wnt) signaling pathway were also investigated. Methods: New compounds were purified from scale-up fermentation of ginsenoside Rb1 by Paecilomyces bainier sp. 229 through repeated silica gel column chromatography and high pressure liquid chromatography. Their structures were determined based on spectral data and X-ray diffraction. The inductive activities of these compounds on the Wnt signaling pathway were conducted on MC3T3-E1 cells by quantitative real-time polymerase chain reaction analysis. Results: The structures of a known 3-keto derivative and two new dehydrogenated metabolites were elucidated. The crystal structure of the 3-keto derivative was reported for the first time and its conformation was compared with that of ginsenoside compound K. The inductive effects of these compounds on osteogenic differentiation by activating the Wnt/b-catenin signaling pathway were explained for the first time. Conclusion: This study may provide a new insight into the metabolic pathway of ginsenoside by microbial transformation. In addition, the results might provide a reasonable explanation for the activity of ginseng in treating osteoporosis and supply good monomer ginsenoside resources for nutraceutical or pharmaceutical development.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권6호
• /
• pp.338-348
• /
• 2003

In the past decade, considerable progress has been made in developing the appropriate biotechnology for microalgal mass cultivation aimed at establishing a new agro-industry. This review points out the main biological constraints affecting algal biotechnology outdoors and the requirements for making this biotechnology economically viable. One of them is the availability of a wide variety of algal species and improved strains that favorably respond to varying environmental conditions existing outdoors. It is thus just a matter of time and effort before a new methodology like genetic engineering can and will be applied in this field as well. The study of stress physiology and adaptation of microalgae has also an important application in further development of the biotechnology for mass culturing of microalgae. In outdoor cultures, cells are exposed to severe changes in light and temperature much faster than the time scale re-quired for the cells to acclimate. A better understanding of those parameters and the ability to rapidly monitor those conditions will provide the growers with a better knowledge on how to optimize growth and productivity. Induction of accumulation of high value products is associated with stress conditions. Understanding the physiological response may help in providing a better production system for the desired product and, at a later stage, give an insight of the potential for genetic modification of desired strains. The potential use of microalgae as part of a biological system for bioremediation/detoxification and wastewater treatment is also associated with growing the cells under stress conditions. Important developments in monitoring and feedback control of the culture behavior through application of on-line chlorophyll fluorescence technique are in progress. Understanding the process associated with those unique environmental conditions may help in choosing the right culture conditions as well as selecting strains in order to improve the efficiency of the biological process.

• 복식
• /
• 제64권7호
• /
• pp.97-113
• /
• 2014

The study aims to determine the significance and characteristics of self-similarity inherent in natural objects or phenomena, the existence of self-similarity in design created by fashion designers, and the traits and internal significance implied in self-similarity and their effects on fashion. The subject of the study is Viktor & Rolf, and the scope of the study is the collections created from 2001 to 2014, which include designs implemented in their early years and those unveiled in the media. Self-similarity means attributes of a fractal structure appearing without change in the original form, even after modification of scale or direction in terms of shape or phenomena. As self-similarity is applied to the arts and design sectors, it leads people to pay attention to fundamental characteristics and intrinsic forms as a factor of expressing a unique creative world. Analysis of Viktor & Rolf collections generated ribbons, overlapping/juxtaposition, side decorations and exaggerated design elements as basic units of self-similarity. These factors had self-similarity rates as high as 84%. Self-similarity was established as design elements formed in the incipient stage were repeated in a certain form, and continued for a long period of time. It served as an element that recognizes design and a fashion designer at the same time. Characteristics of self-similarity appearing in Viktor & Rolf collections can be summarized as homeostasis based on an equivalent relationship, balance based on self-organization, reducibility into essential elements, and uniqueness based on odd shapes. These characteristics influenced the pursuit of consistent brand image, the maintenance of a fashion designer's creative world, the formation of styles and the expression of a fashion designer's identity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.98-98
• /
• 2010

Ion beam irradiation has been extensively used for surface modification of polymers, glassy metals and amorphous and crystalline materials at micron and submicron scales. The surface structures created by exposure to an ion beam range from dots, steps and one-dimensional straight wrinkles to highly complex hierarchical undulations and ripples. In general, the morphology of these nanoscale features can be selected by controlling the ion beam parameters (e.g. fluence and acceleration voltage), making ion beam irradiation a promising method for the surface engineering of materials. In the work, we presented that ion beam irradiation results in creation of a peculiar nanoscale dimple-like structure on the surface of polyimide - a common polymer in electronics, large scale structures, automobile industry, and biomedical applications. The role of broad Ar ion beam on the morphology of the structural features was investigated and insights into the mechanisms of formation of these nanoscale features were provided. Moreover, a systematic experimental study was performed to quantify the role of ion beam treatment time, and thus the morphology, on the coefficient of friction of polyimide surfaces covered by nanostructure using a tribo-experiment. Nano-indentation experiment were performed on the ion beam treated surfaces which shows that the hardness as well as the elastic modulus of the polyimide surface increased with increase of Ar ion beam treatment time. The increased of hardness of polyimide have been explained in terms of surface structure as well as morphology changes induced by Ar ion beam treatment.