• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.46-58
• /
• 2022

This study analyzed the documentation trend of garden components such as plants, infrastructure, unit facilities, and structures, based on 188 measurement drawings of 94 old houses in a report on the documentation of the national folklore cultural heritage. The findings are as follows. First, it was found that plants and structures continuously appeared as the subject of measurement drawings, while infrastructure was often omitted. It was confirmed that unit facilities, which are smaller than other components, were frequently excluded from the documentation subject as well due to frequent changes such as movement, loss, and expansion. Second, the level of expression in measurement drawings showed different aspects for each component. The unit facilities showed a large change over time with respect to the level of documentation, and the level of documentation was somewhat polarized, particularly toward the latter stage. This suggests that the level of documenting the drawings limited to specific facilities improved, but the overall level of drawings did not improve, such as a lack of diversification of expression techniques suitable for various unit facilities. On the other hand, it was confirmed that the level of documenting the drawings for plants, infrastructure and structures did not change to a significant degree, implying that no improvements were made to the expression of components. Third, as for the technique of detailed expression, in the case of plants, vegetation status was prepared without distinction of old or protected trees that have historical value. Above all, there was no record of the vegetation structure that could help grasp the vegetation landscape of the outer area. As for the infrastructure, there was no consistent expression technique to systematically convey topographic changes such as the height and slope of the land. In addition, since there was no subtype classification defined for unit facilities and structures, there was no subject or method of documentation. This study is meaningful in that it expanded the category of documentation, which has been concentrated on buildings in old houses, to gardens, and called attention to the need for documenting the gardens for the preservation and management of old houses as an integration of the building and outer area.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.245-252
• /
• 2021

Purpose: This study examined the radiological and clinical outcomes of internal fixation using a reconstruction plate and 21G circumferential wire in comminuted midshaft clavicular fractures. Materials and Methods: A retrospective cohort study was performed on 51 patients between 2005 and 2019. Thirty-two patients underwent internal fixation with a reconstruction plate and a 21G circumferential wire with minimal soft tissue detachment, and 19 patients underwent surgery without a wire. The patients were assessed with the radiographic parameters, the University of California at Los Angeles (UCLA) score, and the visual analogue scale (VAS) pain score. Based on this, patients who operated without a circumferential wire were set as the control group, and the differences in bone union between the two groups were compared. Results: Thirty-two patients were followed-up for an average of 65 weeks, and 19 patients in the control group were followed-up for an average of 56 weeks. The radiological evaluation confirmed the anatomical reduction and bone union in all 32 patients. No case of nonunion was present. The UCLA score was 32.38 on average and 33.11 in the control group (p=0.395). The VAS score was 1.00 on average and 0.84 in the control group (p=0.668). A significant difference in the bony union time was observed between the group who underwent internal fixation with a reconstruction plate and a 21G circumferential wire with minimal soft tissue detachment, and the control group (p=0.015). On the other hand, there was no statistical significance when other variables were controlled (p=0.107). Conclusion: For displaced midshaft clavicular fractures, internal fixation using a reconstruction plate and 21G circumferential wire maintained accurate anatomical reduction. The satisfactory clinical and radiological results mean that internal fixation using a reconstruction plate and 21G circumferential wire may be a good option for surgical treatment.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.2
• /
• pp.125-133
• /
• 2021

Purpose: The clinical outcomes were investigated to determine if arthroscopic management is a useful method for 19 hips with iliopsoas tendon impingement (IPI) after total hip arthroplasty (THA). Materials and Methods: Eighteen patients (19 hips), who complained of groin pain and flexion pain that persisted after THA from September 2013 to December 2019, were the subjects of this investigation. The mean time to manifestation after THA was four months (range, 1-9 months) in patients of an average age of 60 years (range, 50-69 years). Thirteen out of 18 patients underwent THA using the direct anterior approach and five by the lateral approach. IPI was diagnosed by the medical history, physical examination, blood test, radiographic examination using X-ray and computed tomography, and topical injection therapy. All patients underwent arthroscopic treatment and a dynamic arthroscopic physical examination after exposure to the iliopsoas tendon revealed impingement. Tenotomy was then performed on the muscle portion through the total tendon portion. Symptoms and pain levels of preoperative, postoperative and follow-up period were investigated and compared. Results: The Western Ontario and McMaster Universities Osteoarthritis Index score decreased from an average of 58.4 (range, 40-88) before surgery to an average of 35.0 (range, 15-76) after surgery. Similarly, the visual analogue scale decreased from an average of 4.0 (range, 2-6) before surgery to an average of 1.4 (range, 0-4) after surgery. Sixteen patients (88.9%) showed pain relief and improvement in the straight leg raise test, and two patients showed postoperative muscle weakness and sustained pain. In the follow-up period, muscle weakness improved. One patient underwent arthroscopic iliopsoas tenotomy at the lesser trochanteric level but the symptoms persisted. The clinical symptoms were improved after one more tenotomy at the joint level. Conclusion: Arthroscopic iliopsoas tenotomy performed in patients with IPI after THA showed good clinical results.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.504-512
• /
• 2022

To examine the distribution of internal solar radiation within various locations in multi-span greenhouses, the solar radiation, light transmittance, and accumulated radiation at the central and lateral sections were analyzed by dividing 8:30 to 12:30 in the morning and 12:35 to 16:30 in the afternoon. The growth and yield of tomatoes within these sections were also compared. In the morning, the solar radiation of the central section and the side section was 275.2 W·m^-2 and 314.9 W·m^-2, while in the afternoon, it was 314.9 W·m^-2 and 313.9 W·m^-2, respectively. The light transmittance and accumulated radiation were also low, confirming the low distribution of solar radiation in the central (connecting) section of the multi-span greenhouses. The growth survey revealed no significant difference. The final yield of tomatoes per plant was 4,828 g in the central section and 4,851 g in the lateral section, but there was no significant difference in the central section compared to the lateral section by 0.5%. However, the amount of solar radiation as per time in the central section is higher than the light compensation point, 60 W·m^-2, and slightly lower than the light saturation point of tomatoes, i.e., 281 W·m^-2. The results of this study can help in greenhouse design based on the insolation environment.

• Journal of Wetlands Research
• /
• v.24 no.3
• /
• pp.204-212
• /
• 2022

The LID technique began to be applied in Korea after 2009, and LID facilities are installed and operated for rainwater management in business districts such as the Ministry of Environment, the Ministry of Land, Infrastructure and Transport, and LH Corporation, public institutions, commercial land, housing, parks, and schools. However, looking at domestic cases, the application cases and operation periods are insufficient compared to those outside the country, so appropriate design standards and measures for operation and maintenance are insufficient. In particular, LID facilities constructed using LID techniques need to maintain the environment inside LID facilities because hydrological and environmental effects are expressed by material circulation and energy flow. The LID facility is designed with the treatment capacity planned for the water circulation target, and the proper maintenance, vegetation, and soil conditions are periodically identified, and the efficiency is maintained as much as possible. In other words, the soil created in LID is a very important design element because LID facilities are expected to have effects such as water pollution reduction, flood reduction, water resource acquisition, and temperature reduction while increasing water storage and penetration capacity through water circulation construction. In order to maintain and manage the functions of LID facilities accurately, the current state of the facilities and the cycle of replacement and maintenance should be accurately known through various quantitative data such as soil contamination, snow removal effects, and vegetation criteria. This study was conducted to investigate the current status of LID facilities installed in Korea from 2009 to 2020, and analyze soil changes through the continuity and current status of LID facilities applied over the past 10 years after collecting soil samples from the soil layer. Through analysis of Saturn, organic matter, hardness, water contents, pH, electrical conductivity, and salt, some vegetation-type LID facilities more than 5 to 7 years after construction showed results corresponding to the lower grade of landscape design. Facilities below the lower level can be recognized as a point of time when maintenance is necessary in a state that may cause problems in soil permeability and vegetation growth. Accordingly, it was found that LID facilities should be managed through soil replacement and replacement.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.6
• /
• pp.27-36
• /
• 2021

At a time when the equitable use of urban parks is gradually emerging as a social issue, this study was initiated to expand the influence of urban parks by improving the quality of park services, thereby resolving areas not covered by urban park services. This study targeted the Hangang Park in Seoul, where the qualitative service of parks shows the greatest difference. The influence relationship between the qualitative services of the park and the user's sphere of influence, which indicates the distribution of park users, was proposed to assess the influence of improvements in the quality of service. As a research method, the top three districts and the bottom three districts were selected through the Han River Park user satisfaction survey conducted from 2017 to 2019, and a qualitative service evaluation was carried out. It was derived using the data acquired in September. Afterward, by performing a spatial autocorrelation analysis on the user's sphere of influence, additional verification of the user's sphere of influence was performed numerically and visually. As a result of the study, the user influence in the top three districts, with high-quality service, was stronger and wider than that of the lower three districts. It was confirmed that the quality of service of the park affects the user influence. This shows that to realize park equity, it is necessary to improve the quality of services through continuous management and improvement of individual parks and the creation of new parks. This study has significance in that it recognizes the limitations of research on park services from a supplier's point of view and evaluates the qualitative services of parks from the perspective of actual park users. We propose an alternative to deal with the lower the park deprivation index.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.5-24
• /
• 2022

The current performance evaluation of slope anchors qualitatively determines the physical bonding between the anchor head and ground as well as cracks or breakage of the anchor head. However, such performance evaluation does not measure these primary factors quantitatively. Therefore, the time-dependent management of the anchors is almost impossible. This study is an evaluation of the 3D numerical model by SfM which combines UAS images with terrestrial LiDAR to collect numerical data on the damage factors. It also utilizes the data for the quantitative maintenance of the anchor system once it is installed on slopes. The UAS 3D model, which often shows relatively low precision in the z-coordinate for vertical objects such as slopes, is combined with terrestrial LiDAR scan data to improve the accuracy of the z-coordinate measurement. After validating the system, a field test is conducted with ten anchors installed on a slope with arbitrarily damaged heads. The damages (such as cracks, breakages, and rotational displacements) are detected and numerically evaluated through the orthogonal projection of the measurement system. The results show that the introduced system at the resolution of 8K can detect cracks less than 0.3 mm in any aperture with an error range of 0.05 mm. Also, the system can successfully detect the volume of the damaged part, showing that the maximum damage area of the anchor head was within 3% of the original design guideline. Originally, the ground adhesion to the anchor head, where the z-coordinate is highly relevant, was almost impossible to measure with the UAS 3D numerical model alone because of its blind spots. However, by applying the combined system, elevation differences between the anchor bottom and the irregular ground surface was identified so that the average value at 20 various locations was calculated for the ground adhesion. Additionally, rotation angle and displacement of the anchor head less than 1" were detected. From the observations, the validity of the 3D numerical model can obtain quantitative data on anchor damage. Such data collection can potentially create a database that could be used as a fundamental resource for quantitative anchor damage evaluation in the future.

• Journal of Ginseng Culture
• /
• v.5
• /
• pp.32-51
• /
• 2023

Because red ginseng was exported in large quantities to the Qing Dynasty in the 19th century, a large-scale ginseng cultivation complex was established in Kaesong. Sibyunje (時邊制), a privately led loan system unique to merchants in Kaesong, made it possible for them to raise the enormous capital required for ginseng cultivation. The imperial family of the Korean Empire promulgated the Posamgyuchik (包蔘規則) in 1895, and this signaled the start of the red ginseng monopoly system. In 1899, when the invasion of ginseng farms by the Japanese became severe, the imperial soldiers were sent to guard the ginseng farms to prevent the theft of ginseng by the Japanese. Furthermore, the stateled compensation mission, Baesanggeum Seongyojedo (賠償金 先交制度), provided 50%-90% of the payment for raw ginseng, which was paid in advance of harvest. In 1895, rising seed prices prompted some merchants to import and sell poor quality seeds from China and Japan. The red ginseng trade order was therefore promulgated in 1920 to prohibit the import of foreign seeds without the government's permission. In 1906-1910, namely, the early period of Japanese colonial rule, ginseng cultivation was halted, and the volume of fresh ginseng stocked as a raw material for red ginseng in 1910 was only 2,771 geun (斤). However, it increased significantly to 10,000 geun between 1915 and 1919 and to 150,000 geun between 1920 and 1934. These increases in the production of fresh ginseng as a raw material for red ginseng were the result of various policies implemented in 1908 with the aim of fostering the ginseng industry, such as prior disclosure of the compensation price for fresh ginseng, loans for cultivation expenditure in new areas, and the payment of incentives to excellent cultivators. Nevertheless, the ultimate goal of Japanese imperialism at the time was not to foster the growth of Korean ginseng farming, but to finance the maintenance of its colonial management using profits from the red ginseng business.

• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.135-151
• /
• 2022

This study was conducted on a servicism basis as a study to build the management wisdom of Korea as an asset of human society. The case of the founding and development of the Republic of Korea, which developed into one of the world's leading powers with unprecedented rapid growth despite the devastating three-year war immediately after its founding, is an important subject of study. This study conducted a macroscopic analysis. In the process of carrying out the founding activities, it was confirmed that the original idea inherent in Koreans was the Taegeuk idea of the National Flag. The founders of the Republic of Korea consciously or unconsciously adopted the Taegeuk ideology as the founding ideology. It can be said that the Taegeuk ideology has led to greater success because it is based on the service philosophy, which is the common truth of mankind. In this study, the process of preparing for the founding of the Republic of Korea, which was founded by accepting a new maritime civilization from a country with a long continental civilization, the process of national foundation, and the process of operating the country after its founding were analyzed as a whole. In particular, it discovered the excellent wisdom of the founders who appropriately utilized the strengths of continental and maritime civilizations in necessary situations, and confirmed that the dynamic operating model of development through fierce competition between the two opponents was a success factor for high-speed national development. It requires great wisdom for Koreans with diverse ideological backgrounds and unique personalities to unite to establish and run a nation. This is because fierce competition and cooperation must be carried out at the same time. The great wisdom of the founding of the Republic of Korea was able to be demonstrated because the Taegeuk ideology was acting as a common basic ideology for Koreans. Taegeuk ideology, the source of wisdom that Korea has developed under constant tension, can be capitalized as human wisdom, and additional case studies are needed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1216-1221
• /
• 2022

Ships tend to be larger to increase the efficiency of cargo transportation. Larger ships lead to increased travel time for ship workers, increased work intensity, and reduced work efficiency. Problems such as increased work intensity are reducing the influx of young people into labor, along with the phenomenon of avoidance of high intensity labor by the younger generation. In addition, the rapid aging of the population and decrease in the young labor force aggravate the labor shortage problem in the maritime industry. To overcome this, the maritime industry has recently introduced technologies such as an intelligent production design platform and a smart production operation management system, and a smart autonomous logistics system in one of these technologies. The smart autonomous logistics system is a technology that delivers various goods using intelligent mobile robots, and enables the robot to drive itself by using sensors such as lidar and camera. Therefore, in this paper, it was checked whether the mobile robot could autonomously drive to the stop sign by detecting the passage way of the ship deck. The autonomous driving was performed by detecting the passage way of the ship deck through the camera mounted on the mobile robot based on the data learned through Nvidia's End-to-end learning. The mobile robot was stopped by checking the stop sign using SSD MobileNetV2. The experiment was repeated five times in which the mobile robot autonomously drives to the stop sign without deviation from the ship deck passage way at a distance of about 70m. As a result of the experiment, it was confirmed that the mobile robot was driven without deviation from passage way. If the smart autonomous logistics system to which this result is applied is used in the marine industry, it is thought that the stability, reduction of labor force, and work efficiency will be improved when workers work.