• Journal of electromagnetic engineering and science
• /
• 제13권3호
• /
• pp.158-164
• /
• 2013

This paper expands a previously proposed optimized higher order (2, 4) finite-difference time-domain scheme (H(2, 4) scheme) for use with lossy material. A low dispersion error is obtained by introducing a weighting factor and two scaling factors. The weighting factor creates isotropic dispersion, and the two scaling factors dramatically reduce the numerical dispersion error at an operating frequency. In addition, the results confirm that the proposed scheme performs better than the H(2, 4) scheme for wideband analysis. Lastly, the validity of the proposed scheme is verified by calculating a scattering problem of a lossy circular dielectric cylinder.

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.49-54
• /
• 2010

The cryogenic ball milling was performed on carbon nanotubes (CNTs) at an extremely low temperature to increase the dispersion of CNTs. The effects of milling speed and time on the deagglomeration and structural changes of CNTs were studied. FESEM was used to analyze the dispersion and the change of particle size before and after milling process. Transmission electron microscopic (TEM) analysis was also investigated the effect of cryogenic ball milling on the morphological characteristics of CNTs. The structural changes by the cryogenic ball milling process were further confirmed by x-ray diffraction (XRD) and Raman spectroscopic analysis. The results showed that the agglomeration of CNTs was significantly reduced and amorphous structure was observed at high milling speed. However, the milling time has no great effect on the dispersion property and structural change of CNTs compared with milling speed.

• 대한전자공학회논문지TC
• /
• 제40권5호
• /
• pp.181-186
• /
• 2003

본 논문에서는 관심주파수의 파장에 비하여 매우 섬세한 구조의 해석에 있어서 기존의 FDTD보다 효율적인 해석이 가능한 ADI-FDTD의 분산오차에 대하여 연구하였다. 2-D ADI-FDTD에 적합한 분산식을 제안하였으며 기존의 분산식들과 비교하였다. 수치적인 해석을 통하여 제안된 2-D ADI-FDTD 분산식이 수치결과와 일치함을 확인하였다.

• 한국음향학회지
• /
• 제9권3호
• /
• pp.5-10
• /
• 1990

출발정지선에서 대열을 이룬 차량군이 녹생신호에 의해 출발하면서부터 발생되는 소음을 차량군의 동적특성과 관련지어 차량군의 분산과 소음과의 관련성을 밝히고저 하였다. 차량군의 분산은 분산펙터(P.D.F.) 개념을 이용하였으며 분산펙터는 교통량, 주행시간, 대얼통과시간으로부터 산출되었다.

• 한국항행학회논문지
• /
• 제14권6호
• /
• pp.831-837
• /
• 2010

광 시간 분할 다중/파장 분할 다중 (OTDM/WDM; optical time division multiplexing/wavelength division multiplexing) 전송 시스템의 구현을 위한 40 Gbps RZ 형식의 최적 조건을 충격 계수 (duty cycle)와 소광비 (ER; extinction ratio)에 따른 성능 분석과 비교를 통해 도출하였다. 광전송 링크에는 광섬유의 색 분산과 비선형에 의한 신호 왜곡을 보상하기 위해 광 위상 공액기 (OPC; optical phase conjugator)와 inline 분산 제어 (DM; dispersion management)가 적용되었다. ER에 따른 시스템 성능 변화의 영향이 적으면서 동시에 OTDM에 의한 160 Gbps 신호로의 다중화에 적합한 충격 계수는 0.25이라는 것을 확인하였다. 또한 DM의 적용에 있어 중계 거리 당 잉여 분산 (RDPS; residual dispersion per span)을 크게 할수록 동일한 전체 잉여 분산 (NRD; net residual dispersion)에 의해 결정되는 RZ 형식의 성능 개선 정도를 증가시킬 수 있는 것을 알 수 있었다.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.133-140
• /
• 2001

Recently, to assure the integrity of a structural components such as piping pressure vessels and thinning structure, Lamb wave inspection technique has been used in material evaluation. It is very important to select the optimal Lamb wave mode and to analyze the signal accurately because of its unique dispersion properties grnerating several modes within the speci-men. It this study, the feasibility of material evaluation applications using wavelet analysis of Lamb wave has been veir-fied experimentally. These results show as follows; 1)dispersion characteristic of each mode in dispersion curve is demon-strated that A0 mode propagating material surface is useful mode having the lest energy loss and not sensitive to surface condition. 2) it can be detected even the micro defect ($1\times2mm$) fabricated in ultrasonic probe flaw distance (290mm) to axis direction. 3) the wavelet transform which is called "time-frequency analysis" shows the Lamb wave propagation due to the change of materials characterization can be evaluated at each frequency and experimental group velocity of Lamb wave agrees quite well with that of simulated dispersion curve.ion curve.

• 한국해안해양공학회지
• /
• 제12권4호
• /
• pp.190-194
• /
• 2000

선형파 이론에서 제시되는 유속분포를 이용하여 파랑인자에 의하여 영향을 받는 분산계수를 이론적으로 유도하였다. 유도된 분산계수는 수심평균, 주기 평균된 값으로 천해조건보다 심해조건에서 큰 값을 보이고 있다. 또한, 분산계수 값은 연직 방향 혼합시간에 비하여 큰 주기 값에서는 특정한 값으로 수렴하고, 매우 작은 주기 값에서는 0으로 되는 일반적인 경향도 보이고 있다. 한편, 단순한 지형 및 가정 하에서 유도된 본 분산계수를 보다 실질적인 상황에서도 적용할 수 있고, 천해영역의 조건을 반영할 수 있도록 보완·수정할 필요가 있다.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.73-80
• /
• 1998

This Study was performed to get the suitable oil dispersion agent by assessment of color strength of organic pigment in non-aqueous systems. Organic pigment is used as a color expression material with other body pigments in the make-up products. But occasionally aggregation or agglomeration occurs for the lack of affinity with medium, This function is the cause of disturbing homogeneous dispersion, and then bring about an instability of products. Our study, research of dispersion mechanism between the pigment and oil phase, has been executed to solve this problem, and find a oil dispersion agent having optimum dispersion condition. Generally dispersion is related to between the solid-liquid mutual properties and electrical phenomena associated with solid-liquid interface. This factor is determined to input energy, milling time, optical properties, particle size, rheological properties, etc. Ideal dispersion state is told that coloring primary solid particle is homogeneously dispersed in medium. Good dispersed colorants are strongly and clearly appeared. We are already known that the particle size of organic pigment, chemical properties and viscosity of medium, refractive index. Consequently We determine the affinity of medium and organic pigment by measuring of color strength in the same mechanical condition. UV-VISIBLE RECORDING SPECTRO PHOTOMETER is used for measuring apparatus. We can decided the dispersion level of oil dispersion agent by measuring absorbance of color strength in the visible range that diluted medium for colloid colorant particles.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.406-413
• /
• 2014

An optical true-time delay beam-forming system using a tunable dispersion compensating module (DCM) for dense-wavelength division modulation (DWDM) and a multiwavelength fiber ring laser for a phased array antenna is proposed. The multiwavelength fiber ring laser has one output that includes four wavelengths; and four outputs that include only single-wavelength. The advantage of such a multiwavelength fiber ring laser is that it minimizes the number of devices in the phased array antenna system. The time delays according to wavelengths, which are assigned for each antenna element, are obtained from the tunable DCM. The tunable DCM based on a temperature adjustable Fabry-Perot etalon is used. As an experimental result, a DCM could be used to obtain the change of the beam angle by adjusting the dispersion value of the DCM at the fixed lasing wavelengths of the fiber ring laser in the proposed optical true-time delay.

• Structural Engineering and Mechanics
• /
• 제85권2호
• /
• pp.207-216
• /
• 2023

Three time-discontinuous Galerkin quadrature element methods (TDGQEMs) are developed for structural dynamic problems. The weak-form time-discontinuous Galerkin (TDG) statements, which are capable of capturing possible displacement and/or velocity discontinuities, are employed to formulate the three types of quadrature elements, i.e., single-field, single-field/least-squares and two-field. Gauss-Lobatto quadrature rule and the differential quadrature analog are used to turn the weak-form TDG statements into a system of algebraic equations. The stability, accuracy and numerical dissipation and dispersion properties of the formulated elements are examined. It is found that all the elements are unconditionally stable, the order of accuracy is equal to two times the element order minus one or two times the element order, and the high-order elements possess desired high numerical dissipation in the high-frequency domain and low numerical dissipation and dispersion in the low-frequency domain. Three fundamental numerical examples are investigated to demonstrate the effectiveness and high accuracy of the elements, as compared with the commonly used time integration schemes.