• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1428-1434
• /
• 2002

The ball-on-disk type sliding tests with boundary lubricated steels were carried out to verify the effect of initial spacing in surface profiles on wear and scuffing. Three kinds of surface spacing, which are closely related with initial surface micro-cracks on sliding surfaces, were produced on AISI 1045 steel surfaces using different grinding and polishing processes. Frictional forces and time to scuffing were measured, and the shape and amount of wear particles were analyzed to compare the with original surface profiles. From the tests, it was confirmed that the size of wear particles are related closely to the original spacing of the surface profile. The time to failure and amount of wear were sensitive to the surface spacing. The wider surface spacing shows much longer sliding life and smaller amount of wear than the others. Time to scuffing was increased with increasing surface pro(lie spacing. The size of wear particles increased while the wear and wear rate K were decreased with an increase in surface spacing. After the sliding tests, surface cracks of inner parts of the wear track formed due to scuffing were observed and compared among the specimens having the different surface spacing.

• Tribology and Lubricants
• /
• 제17권5호
• /
• pp.399-405
• /
• 2001

In this paper the ball-on-disk type sliding tests with boundary lubricated steels were carried out to verify the relation between surface profiles and wear as well as scuffing. Three kinds of surface roughness and asperity radius were produced on AISI 1045 steels using the different processes of grinding and polishing. Frictional forces and time to scuffing were measured. Also, the shape and amount of wear particles were analyzed to compare with original profiles. From the tests, it was confirmed that the size of wear particles are very related to original surface profile. The time to failures and wear amounts were sensitive to the surface spacing. The large surface spacing shows much longer sliding life and smaller wear amount than the others. Time to scuffing was increased with increasing surface profile spacing. The sire of wear particles was increased and the amount was decreased with increasing surface profile spacing. Wear volume and wear rate K were decreased with increasing surface profile spacing. And after sliding tests, surface cracks of inner parts of the wear track occurred scuffing were observed and compared the differences about each specimen having the different surface profile spacing.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.64-71
• /
• 2001

In this paper the ball-on-disk type sliding tests with boundary lubricated steels were carried out to verify the relation between surface profiles and wear as well as scuffing. Three kinds of surface roughness and asperity radius were produced on AISI 1045 steels using the different processes of grinding and polishing. Frictional forces and time to scuffing were measured. Also, the shape and amount of wear particles were analyzed to compare with original profiles. From the tests, it was confirmed that the size of wear particles are very related to original surface profile. The time to failures and wear amounts were sensitive to the surface spacing. The large surface spacing shows much longer sliding life and smaller wear amount than the others. Time to scuffing was increased with increasing surface profile spacing. The size of wear particles was increased and the amount was decreased with increasing surface profile spacing. Wear volume and wear rate K were decreased with increasing surface profile spacing. And after sliding tests, surface cracks of inner parts of the wear track occurred scuffing were observed and compared the differences about each specimen having the different surface profile spacing.

• 한국ITS학회 논문지
• /
• 제15권6호
• /
• pp.62-70
• /
• 2016

중앙버스전용차로 근측(Near-side)정류장의 경우 버스교통량이 많아지면 정류장 내에서 신호대기를 하는 차량이 발생하게 되고, 이로 인해 정차면에 진입하지 못하고 신호를 대기하는 차량이 발생하는 비효율이 발생하게 된다. 본 연구는 이러한 현상을 해소하기 위하여 근측버스정류장과 신호교차로의 적정 이격거리를 산정하는 방법을 제시하고자 한다. 기존의 포아송 모형에서 승하차시간을 승하차시간과 신호대기시간의 합으로 변형하여 정차면과 이격거리를 동시에 산정하도록 제시하였다. 또한 이격거리 증가에 따라 신호대기시간이 변화하는 현상을 미시시뮬레이션으로 모사하였다. 마지막으로 이격거리에 따라 변경되는 신호대기시간을 반영하기 위한 반복 알고리즘을 제시하여 적정 이격거리를 산정하도록 제시하였다. 제시된 알고리즘을 적용하여 교통량 수준에 따른 중앙버스전용차로 근측정류장의 적정 이격거리를 제시하였다.

• 한국도로학회논문집
• /
• 제14권2호
• /
• pp.93-99
• /
• 2012

선행 차량과의 상대속도에 따른 차두거리 분포에 관한 연구를 위해 연속류 도로 중 국도에 설치된 차량검지기(VDS, Vehicle Detection System)의 교통정보 수집자료를 분석하였다. 수집자료를 차선별, 방향별로 정렬하여 선행 차량과 후행 차량 사이의 속도차이인 상대속도와 검지기 통과시간 및 차량의 속도를 이용하여 차두거리를 산출하였다. 모든 시간대를 대상으로 산출된 상대속도와 차두거리의 분석을 통해 두 변수간의 관계를 분석한 결과 고르게 분포하고 있는 것으로 나타났고 동일차량군 주행에서 차두거리의 중간값은 약 40m이며, 이는 자료구축 및 분석부분에서 언급한 A~D영역을 분류함에 있어 기준이 될 수 있었다. 시간대에 따른 차두거리 분포에 대한 분석을 위해 수집된 모든 자료의 교통량을 통해 첨두교통량을 산정하고 이를 기준으로 첨두시간과 비첨두시간을 분류하여 차두거리 분포의 차이를 분석하였다. 첨두시간은 비첨두시간에 비해 상대적으로 앞 차량과의 속도 차이가 적고 차두거리가 좁은 것으로 나타났기 때문에 선행차량과 같은 주행 패턴으로 추종한다고 할 수 있고 비첨두시간는 차두거리가 상대적으로 넓은 것으로 나타났다. 이는 운전자의 행태를 나타낼 수도 있는 것으로 차두거리가 좁을수록 공격적인 운전을 하며 본인의 총 통행시간을 줄이고자 하는 욕구가 크다고 미루어 짐작할 수 있겠다. 하지만 여가통행과 비첨두시간의 경우는 첨두시간에 비해 차두거리가 넓은 것으로 미루어보아 시간적 압박이 적어 상대적으로 여유로운 운전행태를 보인다고 할 수 있겠다.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.71-78
• /
• 2007

Input shaping is known to be a very effective tool for suppressing residual vibration without introducing any complicated sensors and feedback control. Real-time input shaping schemes necessitate a process such that the input command is discretized to deal with non-prescribed, real-time input. Thus parameters associated with input command discretization, such as time spacing and duration time, are unknowns which affect the performance of input shaping schemes, especially for small and fast XY stages. This paper investigates the effects of input command discretization parameters, such as time spacing and duration time, on the dynamic performance of XY stages subjected to real-time input shaping. An experimental system is developed which is equipped with an XY stage driven by servo-motors and real-time user command. Experiments are performed to investigate the dynamic performance of XY stage by changing these parameters and to yield a strategy to gain better performance.

• 한국연소학회지
• /
• 제3권2호
• /
• pp.1-11
• /
• 1998

Experimental investigation on flame spread of blended fuel droplet arrays has been conducted for droplet diameters of 1.0mm and 0.75mm using high-speed chemiluminescence images of OH radical. The flame spread rate is measured with blended fuel composition, droplet diameter, and droplet spacing. Flame spread is categorized into two: a continuous mode and an intermittent one. There exist a limit droplet spacing, above which flame does not spread, and a droplet spacing of maximum flame spread, which is closely related to flame diameter. It is seen that flame spread rate is mainly dependent upon the relative position of flame zone within a droplet spacing. In case of large droplet, the increase of % volume of Heptane induces the shift of limit droplet spacing to a larger spacing since volatile Heptane plays a role of an enhancer of flame spread rate. In case of small droplet, the increase of % volume of Heptane leads to the shift of limit droplet spacing to a smaller droplet spacing. This is so because of the delayed chemical reaction time by the rapid increase of mass flux of fuel vapor for small droplet.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.520-529
• /
• 1998

Heat and mass transfer behaviors of metal hydride beds were predicted by solving a set of volume-averaged equations numerically both for the gas (hydrogen) and the solid(metal hydride) phases. Time variations of temperature and hydrogen concentration ratio distributions were obtained for internally cooled, cylindrical-shaped beds with metal(aluminum) fins imbedded in them. Also, time variations of the space-averaged hydrogen concentration ratio were obtained. Temperature and velocity of the coolant, hydrogen pressure at the gas inlet, and the fin spacing were taken as the parameters. The hydrogen absorption rate increases with the higher velocity and the lower temperature of the coolant, and with the decrease of the fin spacing. Increasing of the hydrogen pressure at the gas inlet also promotes the rate of absorption though the increasing rate gradually slows down. The amount of the hydrogen storage per unit volume of the bed decreases with the tighter fin spacing despite of the higher absorption rate ; therefore, there should be an optimum fin spacing for a given volume of the system and the amount of the hydrogen storage, in which the absorption rate is the highest.

• 대한교통학회지
• /
• 제25권3호
• /
• pp.145-154
• /
• 2007

대중교통 시스템의 운행계획 수립과정에서 정류장의 간격과 위치설정은 매우 중요한 문제이다. 본 연구에서는 해석적인 방법을 통해 정류장의 간격과 위치를 결정하는 방법론을 제시하였다. 정류장의 간격은 접근통행속도, 정류장 정차로 인한 손실시간, 승객의 통행거리가 증가함에 따라 길어지고, 통행수요와 배차간격이 늘어남에 따라 짧아진다. 본 연구에서는 수요의 분포가 균일하지 않을 경우 이용자비용과 운영자비용을 합한 총 비용을 최소화시키는 최적 정류장 간격을 도출하는 방법론을 제사하였다. 본 연구의 결과를 보다 일반적으로 확장하기 위해서는 재차 승객의 통행비용을 고려해야 하는데 이에 대해 개념적 예시를 통해 결과의 변화를 논의하였다. 이때의 정류장 위치변화를 살펴본 결과 재차 승객이 많은 구간의 정류장 간격이 다소 넓어지고, 재차 승객이 적은 구간의 정류장 간격이 다소 짧아지는 것을 확인할 수 있었고, 재차 승객이 증가하는 구간보다 재차 승객이 감소하는 구간에 정류장이 보다 많이 배치되는 것을 확인하였다. 본 연구는 동적 프로그래밍을 통해 정류장 위치를 결정하는 복잡한 방법 대신 수요분포의 면적을 균등하게 분할하여 각 정류장의 위치를 결정하는 간단한 방법론을 제시하여 실용적으로 활용될 수 있을 것으로 판단된다. 본 연구를 일반적으로 해석할 경우 모든 간격 설정 문제에 적용될 수 있다. 도로의 간격, 노선의 간격 등의 모든 시설물의 간격을 결정하는 문제에서 적용될 수 있으며, 간격변수를 공간에서 시간으로 변경하게 되면 배차간격을 결정하는 문제에도 바로 적용될 수 있는 확장성을 갖는다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.380-384
• /
• 2000

Effectiveness of information conveyance in reading is affected by several factors such as line length, letter size, line spacing arrangement as well as typeface itself. This study examined relative importance of these factors by asking people to read the texts that was constituted with non-square form letter and rank the preference of texts through conjoint analysis. In the case of reading time, justification was the most important factor, followed by leading, line spacing, letter width, line length, font size, font type in their order of importance. And in the case of preference decision, letter width was the most important factor, followed by font size, justification, line spacing, leading, line length, font type. The result will be useful in understanding how to consider human preference in the hangul typography.