• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.72-79
• /
• 2015

A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of water and most of raw materials in the plating process have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, the companies have to notice the changes immediately to prevent the risk of fire from plating process. Due to this reason, an agile and systematic temperature monitoring system is required for the plating companies. Unfortunately, in case of small size companies, it is hard to purchase a systematic solution and be offered consulting from one of the risk management consulting companies due to an expensive cost. In addition, most of the companies have insufficient research and development (R&D) experts to autonomously develop the risk management solution. In this article, we developed a real time remote temperature monitoring system which is easy to operate with a lower cost. The system is constructed by using Raspberry Pi single board computer and Android application to release an economic issue for the small sized plating manufacturing companies. The derived system is able to monitor the temperature continuously with tracking the temperature in the batch in a short time and transmit a push-alarm to a target-device located in a remoted area when the temperature exceeds a certain hazardous-temperature level. Therefore, the target small plating company achieves a risk management system with a small cost.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.5
• /
• pp.53-60
• /
• 2014

With the rapid development of IT technology, recently, the development of IT convergence technology related to the facility diagnosis is prevalent, and the study for the efficient integrated management scheme is required to handle all relevant information, from the design to the maintenance, including the stage of repair. In this paper, an efficient scheme to process the complex data for the facility and its diagnosis is proposed based on IT convergence technique and the real-time complex data management is designed. In order to evaluate the performance of the proposed system, the real-time management system is designed for a particular facility, and the comparative results show the good performance of the proposed system.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.241-246
• /
• 2012

In this paper, we apply the next generation Internet Broadcasting Move Picture solution, FlashVideo has been designed and implemented. Currently being broadcast in the field to compress HD video in real time, as well as live Internet VOD services are available through the online system, the Internet LIVE broadcast and VOD service easy to operate and UCC services that support the solution. VOD video cameras and in real time using H264 CORECODEC to compress MPEC4, WMV, and real-time video streaming on the Internet, and phone system that supports the first, real-time recording of camera images featured nation's first real-time encoder system (Real time encoder system) is, Web and smart environment suitable for supporting the latest CORECODEC technology and software products. Second, the video can be played in MP4 player and customize your chat, and customizing is a possible two-way Internet Broadcasting System. Third, CMS (Contents Management System) feature video contents and course management contents in real time via the Android phone and iPhone streaming service is available.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1134-1139
• /
• 2009

Haul routes for earthmoving operation need to be carefully selected because the decision on the haul routes could make a significant difference in the project's cost and time. This paper proposes a decision support system for improving productivity of earthmoving operation that helps construction managers choose the best haul routes of trucks based on time slots. Also, a methodology for optimal selection of haul routes considering traffic conditions and topographic conditions of the routes is explained. Raster data model is used to find an available shortest path based on cost weighted distance. A system was developed on a geographic information system environment for efficient database management and easy manipulation of graphical data. A real-world case study was conducted to verify the applicability of the proposed system.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.147-155
• /
• 2014

This paper suggests a specific model that could efficiently improve the interaction and the interface between WMS(Warehouse Management System) terminal and PDA terminal through real time processing in manufacturing shop. The proposed model shows that the new method can more efficiently perform to reduce processing time for shipping and receiving, compared with the current approach. As a result of the certain test among the main server, WMS system, and PDA terminal, it is noted in case of the new proposed system that the effects of proposed model are as follows: (a) While the receiving lead time for carrying by the current method was 2 hours, the receiving lead time by the new method was 20 minutes. (b) While the shipping lead time for carrying by the current method was 1 hours, the shipping lead time by the new method was 15 minutes. (c) While the inventory rate of accuracy by the current method was 85%, the inventory rate of accuracy by the new method was 98%.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.64-73
• /
• 1997

Network technology has been developed for very high-speed networking and multimedia data whose characteristics are the continuous and bursty transmission as well as a large amount of data. With this trend users wish to view the information about the application services as well as network devices and system hardware. However, it is rarely available for the users the information of performance or faults of the application services. Most of information is limited to the information related network devices or system hardware. Furthermore, users expect the best services without knowing the service environments in the network and there is no good way of delivering the service related problems and fault information of application services in a high speed network yet. In this paper we present a web-based application management system that we have developed for the past year. It includes a method to build an agent system that uses an existing network management standards, SNMP MIB and SNMP protocols. The user interface of the system is also developed to support visualization effects with web-based Java interface which offers a convenient way not only to access management information but also to control networked applications.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.7
• /
• pp.10-18
• /
• 1992

In this paper, a simulation model for scope and filter parameters in CMIS/CMIP, OSI management protocol, has been discussed and the suitable scope type was represented by analyzing optimal polling time in network management system, queue size and response time. Scope and filter parameters in MGet, M-Set, M-Action, and =M-Delete services provide a scheme to select some managed objects, and the results are largely varied according to a scope type requested and the outcome of filtering. It has been simulated each scope type and all scope type mixed in a network by varying the offered load and a polling time. On the same time, the response time, queue size of the managing system and a delay time have been measured. As a results, the suitable scope type and polling time enhancing the network performance on the OSI network management is proposed.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1125-1131
• /
• 2014

Application of residential demand response (DR) programs are currently realized up to a limited extent due to customers' difficulty in manually responding to the time-differentiated prices. As a solution, this paper proposes an automatic home load management (HLM) framework to achieve the household minimum payment as well as meet the operational constraints to provide customer's comfort. The projected HLM method controls on/off statuses of responsive appliances and the charging/discharging periods of plug-in hybrid electric vehicle (PHEV) and battery storage at home. This paper also studies the impacts of different time-varying tariffs, i.e., time of use (TOU), real time pricing (RTP), and inclining block rate (IBR), on the home load management (HLM). The study is effectuated in a smart home with electrical appliances, a PHEV, and a storage system. The simulation results are presented to demonstrate the effectiveness of the proposed HLM program. Peak of household load demand along with the customer payment costs are reported as the consequence of applying different pricings models in HLM.

• Management Science and Financial Engineering
• /
• v.8 no.2
• /
• pp.1-20
• /
• 2002

This paper presents a model that analyzes the impact of uncertainties in demand and processing times on the production lead time of a Kanban system. We consider the waste associated with under-production as well as over-production when we measure the production lead time. We set up an optimization model to minimize the production lead time. A simple heuristic procedure is developed to determine solutions in terms of the size of containers and the number of Kanban cards. In addition, we numerically examine the behavior of the optimal Kanban system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.11-17
• /
• 1996

In the case of redundancy control performed by a netowrk management system, it can not be ignored some delay of control time and break of control by failure of the system. This paper proposed a new method to improve the performacne of a redundancy control system interfaced to the network management system. At first, it produced the modelling of the total system and analyzed the functional relation of reliability and failure rate for a transmission system having an one-to-one active redundancy structure controlled by itself. After describing the loss rate of transmission data and the time required for the redundancy control process of the network management system when a failure is occurred, it proposed the new redundancy method of complex system control mode as an effective redundancy control method to improve reliability of a redundancy control system. Finally, it proved the effect by comparing the new result to the previous result.