• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.139-146
• /
• 2009

This paper presents an average internal loop-back antenna calibration method for array antenna in TDD(Time Division Duplex) systems. The proposed method calibrates the amplitude and the phase of RF systems using into mal coupler and switches without aids of external calibration systems. The average calibration scheme of the proposed method also increases reliability of calibration performance. Computer simulation demonstrates that the proposed method corrects beamforming angles of DOA estimation algorithm and BER performance in transmit power allocation scheme.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.72-84
• /
• 2017

Together with the Big Data of the 4th Industrial Revolution, the traffic information system has been changed to an section detection system by the point detection system. With DTG(Digital Tachograph) data based on Global Navigation Satellite System, the properties of raw data and data according to processing step were examined. We identified the vehicle trajectory, the link travel time of individual vehicle, and the link average travel time which are generated according to the processing step. In this paper, we proposed a application method for traffic management as characteristics of processing data. We selected the historical data considering the data management status of the center and the availability at the present time. We proposed a method to generate the Travel Time Index with historical link average travel time which can be collected all the time with wide range. We propose a method to monitor the traffic congestion using the Travel Time Index, and analyze the case of intersections when the traffic operation method changed. At the same time, the current situation which makes it difficult to fully utilize DTG data are suggested as limitations.

• The Korean Journal of Applied Statistics
• /
• v.36 no.6
• /
• pp.573-589
• /
• 2023

In a piecewise linear trend model, the change points coincide with the mean change points of the first differenced time series. Therefore, by detecting the mean change points of the first differenced time series, one can estimate the change points of the piecewise linear trend model. In this paper, based on this fact, a method is proposed for detecting change points of the piecewise linear trend model using the simple moving average of the first differenced time series rather than estimates of the slope or residuals. Our Monte Carlo simulation experiments show that the proposed method performs well in estimating the number of change points not only when the error terms in the piecewise linear trend model are independent but also when they are serially correlated.

• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.3
• /
• pp.353-366
• /
• 2003

Purpose: This study was to define the care time of elderly in long-term care facilities and to compare and analysis the care time by staff and facility types. Method: The data were collected from 530 elderly over sixty, residing in two long-term care hospitals for dementia, three long-term care hospitals for the elderly and two skilled nursing facilities. Care time for individual residents was measured the total time spent by nurses, aides. Result: The average care time measured by nursing staff was 158.6 minutes a day. The average care time for one resident by nurse was 40.4 minutes, and by aides, 118.2 minutes. The difference of the care time showed statistical significance between long-term care facility types(p<0.001) : average care time for dementia hospital(199.1min) was twice as long as that of skilled nursing facility(94.1min). Conclusion: The results of the study showed that the care time differentiates care time provided to elderly in long-term care facilities in Korea. The study suggests the need to emphasize the importance of standardization of level of staff and service programs by the long-term facilities.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.1
• /
• pp.13-23
• /
• 2016

There is a need to analyze unconfined groundwater behavior since the demand of groundwater use has been increasing. While unconfined groundwater temperature is tend to be affected by air temperature, it is hard to find an empirical study in South Korea. In this research, we try to determine the relationship between daily average air temperature and daily average groundwater temperature by time-sequential analysis of groundwater monitoring wells in Galshin basin in Yesan-Gun, Chungcheongnam-Do. In addition, models to estimate groundwater temperature from air temperature were developed. In this research 101-day moving average method with measured air temperature is used to estimate groundwater temperature. To verify the developed model, estimated values of average groundwater temperature with 101 moving average are compared to the measured data from September 10 2007 to September 9 2008. And, Nash-Stucliff Efficiency and Coefficient of Determination were 0.970 and 0.976, therefore it was concluded that the model allowing groundwater temperature estimation from air temperature is with reasonable applicability.

• Journal of Korean Society for Quality Management
• /
• v.25 no.3
• /
• pp.39-50
• /
• 1997

Markov chain method to evaluate the properties of control charts with variable sampling intervals(VSI0 for simultaneously monitoring several correlated quality characteristics under multivariate normal process are investigated. For comparing the efficiencies and properties of multivariate control charts, we consider multivariate Shewhart, CUSUM and EWMA charts in terms of average time to signal(ATS) and average number of samples to signal(ANSS). We obtained stabilized numerical results with Markov chain method when the number of transient state is greater than 100.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.5
• /
• pp.424-431
• /
• 2004

An implicit direct-time integration method for obtaining transient responses of general dynamic systems is described. The conventional Newmark method cannot be directly applied to state-space first-order differential equations, which contain no explicit acceleration terms. The method proposed here is the state-space Newmark method that incorporates the average velocity concept, and can be applied to an analysis of general dynamic systems that are expressed by state-space first-order differential equations. It is also readily coded into a program. Stability and accuracy analyses indicate that the method is numerically unconditionally stable like the conventional Newmark method, and has a period error of 2nd-order accuracy for small damping and 4th-order for large damping and an amplitude error of 2nd-order, regardless of damping. In addition, its utility and validity are confirmed by two application examples. The results suggest that the proposed state-space Newmark method based on average velocity be generally applied to the analysis of transient responses of general dynamic systems with a high degree of reliability with respect to stability and accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1380-1386
• /
• 2011

The request of interrupt accompanies a context switching. If the interrupt is frequently requested, this overhead of context switching can reduce seriously the performance of embedded systems. In order to reduce processing overhead due to frequently requested communication interrupts at Asynchronous Serial Communication, this paper introduces the method of Expanded Asynchronous Serial Communication with the Interrupt Coalescence(IC) that accumulates a fixed number of interrupts and processes them in one time. we implement the existing Asynchronous Serial Communication that requests communication interrupts by one byte at an LN2440SBC embedded board with a uC/OS-II and compare interrupt processing time for the performance evaluation about proposed method. As a result, the communication interrupt processing time of proposed method appears in case of low speed(9,600 bps), the decline of an average 25.18% at transmission, the decline of an average 41.47% at reception. and in case of hight speed(115,200 bps), the decline of an average 16.67% at transmission, the decline of an average 25.61% at reception.

• Journal of Korea Multimedia Society
• /
• v.4 no.6
• /
• pp.543-553
• /
• 2001

In this paper, we proposed management strategy of medical image data in order to solve the problem in traditional medical images migration method. As management strategy of medical image data we proposed EAT(Expanded Average Transaction time) data migration method and data storing method based on temporal interrelation. In EAT data migration strategy, we define the dividing criterion which distinguish entity versions to be stored in each storage and also define entity versions to be stored in each storage. We defined degree of overlap and degree of difference for any two entity versions, and integrated those values and described method which place entity versions to storage. In order to compare the number of cluster references when we change rate of temporal queries, the number of cluster references of proposed method is smaller than that of traditional method.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.91-101
• /
• 2001

In order to propose a optimum method increasing accuracy and reproducibility in analysis of urine lead levels, we compared matrix modifier addition method and microwave digestion method. The results were as follows ; 1. Where the concentration of $Pd(NO_3)_2$(matrix modifier) was $50mg/{\ell}$, and ashing temperature was $900^{\circ}C$, the results were optimum. In case of matrix modifier addition method, the average coefficient of variation (CV) of normal man was 24.1%, and lead worker was 7.9%. The average urine lead levels of standard were $10.42\mu{g}/{\ell}$ and $19.89\mu{g}/{\ell}$ , the accuracies compared to reference values were 97.0% and 92.6%, respectively. 2. Microwave digestion temperature($160~180^{\circ}C$), time(15~25min) and the ratio of urine/ashing acid(1:1~4:1) did not significantly affect lead absorbance and background absorbance. Therefore we set up a optimum analytical conditions as follows: temperature, $160^{\circ}C$; time, 15min; the ratio of urine/ashing acid, 4:1. after samples were digested by the above analytical conditions, lead absorbance and background absorbance was measured at $450^{\circ}C$ as ashing temperature. The average coefficient of variation (CV) of normal man was 12.4%, and lead worker was 6.2%. The average urine lead levels of standard urine were $10.66\mu{g}/{\ell}$ and $23.31\mu{g}/{\ell}$, the accuracies compared to reference values were 99.3% and 103.9%, respectively. From the results, we suggest that microwave digestion method is a more favorable method than matrix modifier addition method because of easiness to reduce organic matter, possibility to analysis at low temperature and accuracy.