• 한국농촌건축학회논문집
• /
• 제3권1호
• /
• pp.25-40
• /
• 2001

In this study, I investigate the formation process of the American presbyterian missionary architecture in Cheong Ju area from 1900 to 1945, which we may think 'the part of Korean modern architecture'. I have examined and analyzed the 18 buildings for the sake of the interpretation with the words of formation process and characteristics . And I can put my idea in order as follows. Firstly, the formation process is 1) buy and modify a Korean style (thatch or tile roofed) building for their need and use it as a gate quaters or house, church, hospital, school, book store, 2) build a Korean style (tile roofed) building and use it-house, hospital, school, 3) build a Western style (timber structured and zinc roofed) building and use it- church, 4) build a Western style (masonry structured and tile or zinc roofed) building and use ithouse, church, school and hospital. Secondly, the characteristics is 1) In the Korean style building, the missionaries change into the function to match with their purpose. they modify the Korean style timber structure by influx of building material-brick, glass, carpet etc. they occupy into the Korean existing residential area. 2) In the Western style building, the missionaries build the house correspond with their living pattern. they build the church with the eclectic of Western and Korean timber frame. and also build the house and hospital with the eclectic of Western and Korean masonry structure. their building located in the isolate hill separated from the existing Korean residential area.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• Journal of the Korean Wood Science and Technology
• /
• 제50권5호
• /
• pp.301-314
• /
• 2022

The moisture and dimensional behaviors of a nail-laminated timber (NLT)-concrete slab composed of an NLT-plywood composite and topping concrete are monitored for 385 days. The slab is developed for using as flexural elements such as floors. The humidity control of wood gently introduces significant fluctuations under the ambient relative humidity into the slab, and fluctuations in the relative humidity result in dimensional changes. The equilibrium moisture content of the slab increases from 6.7% to 15.3% during the monitoring period, resulting in a width (radial) strain of 0.58%. The length (longitudinal) strain is negligible, and the height (tangential) strain is excluded from the analysis because of abstruse signal patterns generated. Concrete pouring causes a permanent increase in the width of the NLT-plywood composite. However, the width deforms because the weight of the concrete mixture loosens the nail-laminated structure, not because of the significant amount of moisture in the mixture. The dimensional stabilization effect of the nail-laminated system is demonstrated as the composite strain is lower than the total strain of lumber and plywood, which are elements constituting the nail-laminated structure.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1715-1724
• /
• 2015

이 연구는 정부의 목재산업진흥 종합계획에 기초하여 장기적인 산림의 영급구조 변화와 국내재 공급 가능성에 대해 살펴보았다. 목재는 주벌과 수종갱신, 피해지 벌채, 솎아베기 등을 통하여서만 공급된다고 가정하였다. 영급별 면적의 동태적인 변화를 추정하기 위하여 코호트 관계식을 이용하였다. 2010년 전체 시업지의 7.7%에 불과하던 6영급 면적이 크게 증가하여 2100년에는 약 73% 정도를 차지할 것으로 분석되었다. 반면 다른 영급의 면적은 5.3~5.6%의 분포를 나타낼 것으로 전망된다. 목재공급에 있어서는 주벌에 의한 생산이 93~95%를 차지할 것으로 예상된다. 2영급과 3영급의 면적에 좌우되는 솎아베기 생산량은 면적의 감소와 함께 점진적으로 줄어들 것으로 예상된다. 국내재 예상 공급을 선행연구 결과로 제시된 국내재 예상 수요와 비교하여 자급률을 계산한 결과 2050년에 83% 정도 될 것으로 예상된다.

• 한국가구학회지
• /
• 제17권3호
• /
• pp.1-16
• /
• 2006

Based on data collected by the State Forestry Administration (SFA) and other databases, this paper describes the current status, future trend and general policies in China's forestry. Forestry sector plays an important role in GDP growth of China. As a result forestry industry value output is increasing day by day. There is huge gap between demand and supply of timber projected in 2010. As a result it is necessary to develop fast growing, high yield forest following some specific policies. The ultimate goals of forestry are to construct or improve industry infrastructure, overall upgrade of forest industry structure, income improvement of forest employees and peasants, polices renewal and technology improvement, acceleration of forest processing with high-tech.

• 한국주거학회논문집
• /
• 제15권5호
• /
• pp.85-96
• /
• 2004

The purpose of this study was to (md out the characteristics of the residential house in Ulleung Island in terms of building materials, structure and construction method, structural design by actual field surveys. This study found several facts; First, the house was classified into the log house and mud-wall house according to building material for wall structure. The log house prevailed in the early days of the settlement in the island because of affulent timber materials available around. However, the mud wall house became a popular type in later days because of the depletion of timber materials. Second, the Udeki wall was an unique installation reflecting the severe climate conditions of Ulleung Island. However, many aspects of the Udeki wall was changed according to the change of living style and the introduction of modem heating systems in terms of its function, size, building material, layout position etc. Third, the roofing material also has been changed from materials available locally to slate materials transported from the mainland. Fourth, the bamboo slender-ribbed door as a single-swing door type was popular and later time the single-sliding door or three ribbed door was widely used in rooms installed later instead. Fifth, the roof was placed over the room, kitchen, and Chukdam (outer wall) and this was a resonable way to cope with heavy snowfalls in the winter season in Ulleung Island.

• Structural Engineering and Mechanics
• /
• 제77권4호
• /
• pp.509-521
• /
• 2021

The neighbouring gaps at the mortise-tenon joint in traditional timber structure, which leads to the complexity of the joint, are considered to impair the mechanical performance of the joint. In this paper, numerical simulation of loose joint was conducted to examine the deformation states, stress distributions, and bearing capacities, which was verified by full-scale test. On the basis of the experimental and numerical results, a simplified mechanics model with gaps has been proposed to present the bending capacity of the loose joint. Besides, the gap effects and parameter studies on the influences of tenon height, friction coefficient, elastic modulus and axial load were also investigated. As a result, the estimated relationship between moment and rotation angle of loose joint showed the agreement with the numerical results, demonstrating validity of the proposed model; The bending bearing capacity and rotational stiffness of loose joint had a certain drop with the increasing of gaps; and the tenon height may be the most important factor affecting the mechanical behaviors of the joint when it is subjected to repeated load; Research results can provide important references on the condition assessments of the existing mortise-tenon joint.

• Journal of the Korean Wood Science and Technology
• /
• 제52권4호
• /
• pp.301-318
• /
• 2024

Contrary to other materials like metals, glass, etc., wood continuously interacts with the environment, increasing and decreasing its moisture content according to the humidity of the air and changing its dimensions by swelling or shrinking. Water diffusion through laminated solid wood is crucial in wood bonding processes. The adhesive layer might block the diffusion if the water vapor diffusion is perpendicular to the bond line. As a result of this blockage, different proportions of deformation appear on the two sides of the bond line, which causes stresses in the bonded assembly. The question arises of how long the bonded structure will keep its integrity due to moisture diffusion blockage, inevitable tensions appearing in the glue line, and how these stresses could be avoided. With cross laminated timber (CLT) solid wood panel production, this question gains new importance. Despite the relevance, only a limited number of publications are available. Comprehensive research would also be necessary considering both the molecular structure and diffusion properties of the adhesive adjusted to the wood species (covering possible substituting wood species, too). Overall, this review serves as a resource for enhancing our understanding of water vapor diffusion through wood adhesive layers and provides insights that have implications for reducing stresses in bonded wood assemblies and the performance of the bonded group over time. Furthermore, identifying knowledge gaps is necessary to establish the basis for investigating the diffusion property of CLT panels.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.49-52
• /
• 2008

목재자원을 효율적으로 활용하기 위한 목적으로 개발된 공학목재는 기존에 구조용으로 사용되어 오던 목재제품에 비해 강도가 높으면서도 안정적인 장점을 가지고 있다. 또한 설계 상세에 따라 부재를 주문 제작이 가능하며, 대규모 건축물에도 주요 구조체로 사용되어져 오고 있다. 장 스팬이 요구되는 재료로 구조용 집성재나 목재 I형장선, 단판적층재(LVL) 등을 활용하여 사용되고 있다. 본 프로젝트는 공학목재 중에서 집성재 및 막재를 이용한 구조 시스템으로, 강원도 뿌리기념관 공원공사 중 "야외무대 지붕공사"로 구조 재료, 구조설계 및 시공에 관한 내용으로 구성되어 있다. 지붕 구조재는 PVF/PFLT(테드라 필름코팅) 소재의 막이 사용되었다. 기둥 및 경사 부재는 강재(SS400)를 사용하였고, 캔틸레버 보 부재는 비대칭 구성 집성재(10S-28B)를 이용하였다.

• 보존과학회지
• /
• 제5권2호
• /
• pp.51-56
• /
• 1996

This paper deals with the restoration of ancient wooden bridge foundation which excavated in Seta river Shiga Prefecture, Japan. Shiga Archeological Research started a marine archeological investigation of the bridge foundation in 1987. The bridge foundation stricture excavated and have since then recovered about a lots of woods and another materials. The bridge foundation structure constructed log, timbers and stones. The species of those waterlogged wood were identified as two types, hardwood and softwood. Hardwood(log : Cyclobalanopsis) was used for below foundation and softwood (timber' Chamaecyparis obtusa Endl. Cupreessaceae) was used for base structure. One of those timber sample dated by dendrochronology, we asked Dr. Misutani*. The softwood gave a felling date of 567 A.D. In result, the ancient Seta bridge foundation structure had constructed between Asuka and Nara period. We healed the news that ancient bridge foundation excavated at Woljyongyo site in Kyongju, Korea 1987. The bridge foundation Setakarahashi is similar in plane and structure to Woljyongyo structures. The Woljyongyo site report had be of value for reference. We had planning to restore those woods. Hardwood log was got serious damage. The water content varies from 400 to $600\%$. The other timbers water content varies about $200\%$. In the Shiga Center for Archaeological Operations and the Azuchi Castle Archaeological Museum, we set up the PEG impregnation tank. Those wooden objects treated by PEG method. PEG with a molecular weight of 4000. The treatment results may be considered satisfactory. The ancient wooden Seta bridge was reconstructed in Biwako Museum which established in Oct. 1996. We must take care of indoor exhibition environments. (*Nara National Cultual Properties Research Institute).