Browse > Article
http://dx.doi.org/10.5658/WOOD.2022.50.5.301

Monitoring of Moisture and Dimensional Behaviors of Nail-Laminated Timber (NLT)-Concrete Slab Exposed to Outdoor Air  

HWANG, Sung-Wook (Research Institute of Agriculture and Life Sciences, Seoul National University)
CHUNG, Hyunwoo (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University)
LEE, Taekyeong (Research Institute of Agriculture and Life Sciences, Seoul National University)
AHN, Kyung-Sun (Department of Agriculture, Forestry and Bioresources, College of Agriculture and Life Sciences, Seoul National University)
PANG, Sung-Jun (Research Institute of Agriculture and Life Sciences, Seoul National University)
BANG, Junsik (Department of Agriculture, Forestry and Bioresources, College of Agriculture and Life Sciences, Seoul National University)
Won, Hyo (Research Institute of Agriculture and Life Sciences, Seoul National University)
OH, Jung-Kwon (Research Institute of Agriculture and Life Sciences, Seoul National University)
YEO, Hwanmyeong (Research Institute of Agriculture and Life Sciences, Seoul National University)
Publication Information
Journal of the Korean Wood Science and Technology / v.50, no.5, 2022 , pp. 301-314 More about this Journal
Abstract
The moisture and dimensional behaviors of a nail-laminated timber (NLT)-concrete slab composed of an NLT-plywood composite and topping concrete are monitored for 385 days. The slab is developed for using as flexural elements such as floors. The humidity control of wood gently introduces significant fluctuations under the ambient relative humidity into the slab, and fluctuations in the relative humidity result in dimensional changes. The equilibrium moisture content of the slab increases from 6.7% to 15.3% during the monitoring period, resulting in a width (radial) strain of 0.58%. The length (longitudinal) strain is negligible, and the height (tangential) strain is excluded from the analysis because of abstruse signal patterns generated. Concrete pouring causes a permanent increase in the width of the NLT-plywood composite. However, the width deforms because the weight of the concrete mixture loosens the nail-laminated structure, not because of the significant amount of moisture in the mixture. The dimensional stabilization effect of the nail-laminated system is demonstrated as the composite strain is lower than the total strain of lumber and plywood, which are elements constituting the nail-laminated structure.
Keywords
monitoring; nail-laminated timber (NLT); strain; wood moisture;
Citations & Related Records
Times Cited By KSCI : 17  (Citation Analysis)
연도 인용수 순위
1 Dietsch, P., Winter, S. 2018. Structural failure in largespan timber structures: A comprehensive analysis of 230 cases. Structural Safety 71: 41-46.   DOI
2 Hendrik, J., Hadi, Y.S., Massijaya, M.Y., Santoso, A., Pizzi, A. 2019. Properties of glued laminated timber made from fast-growing species with mangium tannin and phenol resorcinol formaldehyde adhesives. Journal of the Korean Wood Science and Technology 47(3): 253-264.   DOI
3 Song, D., Kim, K. 2022. Influence of manufacturing environment on delamination of mixed cross laminated timber using polyurethane adhesive. Journal of the Korean Wood Science and Technology 50(3): 167-178.   DOI
4 Wang, J.Y., Stirling, R., Morris, P.I., Taylor, A., Lloyd, J., Kirker, G., Lebow, S., Mankowski, M., Barnes H.M., Morrell J.J. 2018. Durability of mass timber structures: A review of the biological risks. Wood and Fiber Science 50: 110-127.   DOI
5 Harte, A.M. 2017. Mass timber - The emergence of a modern construction material. Journal of Structural Integrity and Maintenance 2(3): 121-132.   DOI
6 Herberg, E. 2018. Flexural performance of nail-laminated timber crane mats. Ph.D. Thesis, University of Minnesota, USA.
7 Jung, H., Song, Y., Hong, S. 2020. Effect of glass fiber-reinforced connection on the horizontal shear strength of CLT walls. Journal of the Korean Wood Science and Technology 48(5): 685-695.   DOI
8 Bjorngrim, N., Hagman, O., Wang, X.A. 2016. Moisture content monitoring of a timber footbridge. Bio-Resources 11(2): 3904-3913.
9 Bergman, R., Puettmann, M., Taylor, A., Skog, K.E. 2014. The carbon impacts of wood products. Forest Products Journal 64(7-8): 220-231.   DOI
10 Binational Softwood Lumber Council. 2017. Nail-laminated timber U. S. design & construction guide. https://sweets.construction.com/swts_content_files/153333/3309087.pdf
11 Franke, B., Franke, S., Muller, A., Vogel, M., Scharmacher, F., Tannert, T. 2013. Long term monitoring of timber bridges: Assessment and results. Advanced Materials Research 778: 749-756.   DOI
12 Chang, Y.S., Yang, S.Y., Chun, H., Kang, K.Y., Choi, J.W., Choi, I.G., Yeo, H. 2015. Development of moisture content prediction model for Larix kaempferi sawdust using near infrared spectroscopy. Journal of the Korean Wood Science and Technology 43(3): 304-310.   DOI
13 De Araujo, V., Vasconcelos, J., Cortez-Barbosa, J., Morales, E., Christoforo, A., Gava, M., Lahr, F., Garcia, J. 2020. Wood consumption and fixations of carbon dioxide and carbon from timber housing techniques: A Brazilian panorama. Energy and Buildings 216:109960.   DOI
14 Dietsch, P., Franke, S., Franke, B., Gamper, A., Winter, S. 2015a. Methods to determine wood moisture content and their applicability in monitoring concepts. Journal of Civil Structural Health Monitoring 5(2): 115-127.   DOI
15 Hong, K.E.M. 2017. Structural performance of naillaminated timber-concrete composite floors. Ph.D. Thesis, University of British Columbia, Canada.
16 Choi, G.W., Yang, S.M., Lee, H.J., Kim, J.H., Choi, K.H., Kang, S.G. 2020. A study on the block shear strength according to the layer composition of and adhesive type of ply-lam CLT. Journal of the Korean Wood Science and Technology 48(6): 791-806.   DOI
17 Ahn, K.S., Pang, S.J., Oh, J.K. 2021. Prediction of with-drawal resistance of single screw on Korean wood products. Journal of the Korean Wood Science and Technology 49(1): 93-102.   DOI
18 Bobadilha, G.S., Stokes, C.E., Kirker, G., Ahmed, S.A., Ohno, K.M., Lopes, D.J.V. 2020. Effect of exterior wood coatings on the durability of cross-laminated timber against mold and decay fungi. BioResources 15(4): 8420-8433.   DOI
19 Bouckaert, S., Pales, A.F., McGlade, C., Remme, U., Wanner, B., Varro, L., D'Ambrosio, D., Spencer, T. 2021. Net Zero by 2050: A Roadmap for the Global Energy Sector. International Energy Agency, Paris, France.
20 British Columbia. 2009. Wood first act. https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/09018_01
21 Dietsch, P., Gamper, A., Merk, M., Winter, S. 2015b. Monitoring building climate and timber moisture gradient in large-span timber structures. Journal of Civil Structural Health Monitoring 5(2): 153-165.   DOI
22 Forsen, H., Tarvainen, V. 2000. Accuracy and Functionality of Hand Held Wood Moisture Content Meters. VTT Technical Research Centre of Finland, Espoo, Finland.
23 Franke, B., Franke, S., Muller, A. 2015. Case studies: Long-term monitoring of timber bridges. Journal of Civil Structural Health Monitoring 5(2): 195-202.   DOI
24 Fujimoto, Y., Tanaka, H., Morita, H., Kang, S.G. 2021. Development of ply-lam composed of Japanese cypress laminae and Korean larch plywood. Journal of the Korean Wood Science and Technology 49(1): 57-66.   DOI
25 Hafsa, W., Angellier, N., Takarli, M., Pop, O. 2021. A mixed experimental-numerical electrical resistivity-based method for moisture content assessment in wood tested using the example of Douglas fir. Wood Science and Technology 55(3): 697-718.   DOI
26 Hailwood, A.J., Horrobin, S. 1946. Absorption of water by polymers: Analysis in terms of a simple model. Transactions of the Faraday Society 42: B084-B092.
27 Kirker, G.T., Bishell, A.B., Zelinka, S.L. 2016. Electrical properties of wood colonized by Gloeophyllum trabeum. International Biodeterioration & Biodegradation 114:110-115.   DOI
28 Derikvand, M., Jiao, H., Kotlarewski, N., Lee, M., Chan, A., Nolan, G. 2019. Bending performance of naillaminated timber constructed of fast-grown plantation eucalypt. European Journal of Wood and Wood Products 77(3): 421-437.   DOI
29 Hwang, S., Hwang, S., Lee, T., Ahn, K., Pang, S., Park, J., Oh, J., Kwak, H., Yeo, H. 2021. Investigation of electrical characteristics using various electrodes for evaluating the moisture content in wood. BioResources 16(4): 7040-7055.   DOI
30 Japanese Ministry of Agriculture, Forestry, and Fisheries. 2010. The act for promotion of use of wood in public buildings, etc. https://elaws.e-gov.go.jp/document?lawid=422AC0000000036_20211001_503AC0000000077
31 Lee, I.H., Kim, K., Shim, K. 2022. Evaluation of bearing strength of self-tapping screws according to the grain direction of domestic Pinus densiflora. Journal of the Korean Wood Science and Technology 50(1): 1-11.   DOI
32 Nursultanov, N., Altaner, C., Heffernan, W.J.B. 2017. Effect of temperature on electrical conductivity of green sapwood of Pinus radiata (radiata pine). Wood Science and Technology 51(4): 795-809.   DOI
33 Park, Y., Han, Y., Park, J.H., Chang, Y.S., Yang, S.Y., Chung, H., Kim, K., Yeo, H. 2015. Evaluation of physico-mechanical properties and durability of Larix kaempferi wood heat-treated by hot air. Journal of the Korean Wood Science and Technology 43(3): 334-343.   DOI
34 Sinha, A., Udele, K.E., Cappellazzi, J., Morrell, J.J. 2020. A method to characterize biological degradation of mass timber connections. Wood and Fiber Science 52(4): 419-430.   DOI
35 Brischke, C., Rapp, A.O., Bayerbach, R. 2008. Measurement system for long-term recording of wood moisture content with internal conductively glued electrodes. Building and Environment 43(10): 1566-1574.   DOI
36 Yang, S.M., Lee, H.H., Kang, S.G. 2021. Research trends in hybrid cross-laminated timber (CLT) to enhance the rolling shear strength of CLT. Journal of the Korean Wood Science and Technology 49(4): 336-359.   DOI
37 Kim, J.H., Lee, W.H. 2002. Physical properties of larch (Larix kaemferi Carr.) treated by high temperature steaming-Effect of high temperature steaming on shrinkages of larch block. Journal of the Korean Wood Science and Technology 30(2): 102-107.
38 Kramer, V., Blass, H. 2001. Load carrying capacity of nail-laminated timber under concentrated loads. In: Venice, Italy, Proceedings of the 34th CIB W18 Meeting, pp. 22-24.
39 Kremer, P.D., Symmons, M.A. 2015. Mass timber construction as an alternative to concrete and steel in the Australia building industry: A PESTEL evaluation of the potential. International Wood Products Journal 6(3): 138-147.   DOI
40 Yang, S.Y., Han, Y., Park, J.H., Chung, H., Eom, C.D., Yeo, H. 2015. Moisture content prediction model development for major domestic wood species using near infrared spectroscopy. Journal of the Korean Wood Science and Technology 43(3): 311-319.   DOI
41 Chang, Y.S., Han, Y., Eom, C.D., Jeon, S., Yeo, H. 2019. Hygroscopic property of heat treated yellow poplar (Liriodendron tulipifera) wood. Journal of the Korean Wood Science and Technology 47(6): 761-769.   DOI
42 Choi, G.W., Yang, S.M., Lee, H.J., Kim, J.H., Choi, K.H., Kang, S.G. 2021. Evaluation of flexural performance according to the plywood bonding method of ply-lam CLT. Journal of the Korean Wood Science and Technology 49(2): 107-121.   DOI
43 Eversmann, P., Gramazio, F., Kohler, M. 2017. Robotic prefabrication of timber structures: Towards automated large-scale spatial assembly. Construction Robotics 1: 49-60.   DOI
44 Galih, N.M., Yang, S.M., Yu, S.M., Kang, S.G. 2020. Study on the mechanical properties of tropical hybrid cross laminated timber using bamboo laminated board as core layer. Journal of the Korean Wood Science and Technology 48(2): 245-252.   DOI
45 Shupe, T., Lebow, S., Ring, D. 2008. Causes and Control of Wood Decay, Degradation & Stain. Louisiana State University, Agricultural Center, Baton Rouge, LA, USA.
46 Liu, J., Ji, Y., Lu, J., Li, Z. 2022. Mechanical behavior of treated timber boardwalk decks under cyclic moisture changes. Journal of the Korean Wood Science and Technology 50(1): 68-80.   DOI
47 Mahnert, K.C., Hundhausen, U. 2018. A review on the protection of timber bridges. Wood Material Science & Engineering 13(3): 152-158.   DOI
48 Park, H.J., Jo, S.U. 2020. Moisture absorption and desorption properties of Douglas fir, hinoki, larch, plywood, and WML board® in response to humidity variation. Journal of the Korean Wood Science and Technology 48(4): 488-502.   DOI
49 Park, J., Song, Y., Hong, S. 2020. Bending creep of glulam and bolted glulam under changing relative humidity. Journal of the Korean Wood Science and Technology 48(5): 676-684.   DOI
50 Reci, H., Mai, T.C., Sbartai, Z.M., Pajewski, L., Kiri, E. 2016. Non-destructive evaluation of moisture content in wood using ground-penetrating radar. Geoscientific Instrumentation, Methods and Data Systems 5(2): 575-581.   DOI