• Journal of Broadcast Engineering
• /
• v.25 no.7
• /
• pp.1052-1062
• /
• 2020

As the market demand for immersive media increases, an efficient streaming method is required in consideration of network conditions while maintaining the user's immersive experience. Accordingly, transmitting a viewport with relatively high-quality, such as tile-based streaming, is mainly used. But there still remains a lot of technical challenges, such as quickly providing a new viewport in high-quality according to the gaze. To solve the aforementioned problem, in this paper, we propose a method of configuring and transmitting a supplemental tile set through the predicted direction, and a range of stable utilization of the transmitted supplemental tile set.

• Water for future
• /
• v.29 no.6
• /
• pp.203-215
• /
• 1996

A physically based model for rainfall-runoff simulation in agricultural watersheds equipped with tile drains is developed from the TOPMODEL framework. The model is based on detailed topographical information provided by the Digital Elevation Model (DEM), which is available in the Geographic Information System GRASS. Nine possible flow generation scenarions are suggested and used in the development of the model. The storage and delaying effects in the soil matrix and in the tile system are simulated with a second order linear reservoir. The model can identify the portions of the hydrators resulting from tile flow, subsurface flow and surface runoff.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.590-595
• /
• 2015

This paper proposes a design of efficient hierarchy structure in the tile based rasterizer. The proposed hierarchy structure avoids unnecessary calls of low level tile at which a calculation is not required. A low level tile is classified into three categories based on its maximum, minimum position, and inside outside test. The necessity of calculations on the corresponding low level tile can be determined by its classification. The overall amount of computations for graphic processing can be reduced by not calling for the low level tile with no calculation. The proposed hierarchy structure can reduce an execution time of graphic processing. It shows higher efficiency with the more vertex density of formulating 3D model.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.35-36
• /
• 2017

This study used Geopolymer to study tile waterproofing adhesives. The materials used in this study were polymer and acrylic resin, and were evaluated based on adhesion and water resistance. In particular, the adhesion was evaluated under various conditions, and the substrate was comparatively evaluated on the concrete and tile surface conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.309-311
• /
• 2014

The tile-based rendering technique which divides the screen area into tiles of a specific size and creates a 3D graphic model of one tile at a time is used to efficiently utilize limited resources in a 3D graphic pipeline. In this paper, the tiling speed of tile-based rendering was improved by reducing the count of calling lower-levels in the hierarchical tile-based rendering technique. The tiling speed of the proposed Rasterizer is 13.030ms which is 56% faster than 29.614ms of multi-sort tiling and 24% faster than 17.208ms of the conventional hierarchical tiling technique.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1053-1063
• /
• 2019

Recently, tile-based streaming that transmits one 360 video in several tiles, is actively being studied in order to transmit these 360 video more efficiently. In this paper, for the transmission of high-definition 360 video corresponding to user's viewport in tile-based streaming scenarios, a system of assigning the quality of tiles at each tile by applying the saliency map generated by existing network models is proposed. As a result of usage of Motion-Constrained Tile Set (MCTS) technique to encode each tile independently, the user's viewport was rendered and tested based on Salient360! dataset, streaming 360 video based on the proposed system results in gain to 23% of the user's viewport compared to using the existing high-efficiency video coding (HEVC).

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.147-148
• /
• 2015

This paper proposes a tile level rate control for High Efficiency Video Coding (HEVC). The proposed tile level rate control is designed by considering the multi-core platform of tile in HEVC. The proposed tile level rate control allocates the number of bits for each tile based on the predetermined weight generated from the current picture level rate control. According to the experimental results, the proposed tile level rate control for HEVC on multi-core platform loses negligibly the bitrate accuracy about 0.07% on average over the reference software HM-14.0.

• Journal of architectural history
• /
• v.23 no.6
• /
• pp.21-26
• /
• 2014

The purpose of this study is to retrospect the establishment process of specification of modern factory-made traditional Korean roof-tile. Its another purpose is to analyze the specification of watong(瓦桶, a wooden molding frame for roof tile making) which is recorded in the literature of Joseon dynasty. The results of this study are as follows. : First, the specification of modern factory-made Korean roof-tile that currently used was established in 1978. And it did not succeed old traditional specification. Second, in case of construction or repair of main building of palace, it was a principle to use Daewa(大瓦, the big size roof-tile). And Sangwa(常瓦, the ordinary size roof-tile) was used when needed. Also, Jungwa(中瓦, the middle size roof-tile) was used regardless of the size of group building. And Sowa(小瓦, the small size roof-tile) was used in house and wall of royal tomb. Third, it is needed to establish a specification of traditional handmade roof-tile based on the specification of watong through research of the litterateur. So, a standard draft for this was proposed. Finally, one can find the significance that this study has tried to find a specification of traditional roof-tile that can be applied to construction or repair of cultural heritage.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1989.04a
• /
• pp.1-4
• /
• 1989

Since 1960's, structural engineers have recognized that tile inherent random nature of loadings and materials as well as the imperfect structural analysis may be important factors in tile structural safety evaluation. Based on the successful developments of the reliability based structural analysis and design, the design criteria of tile standards are recently developed(or modified) in the light of the probabilistic concepts. To develop the probability-based design criteria for tile domestic buildings, the probabilistic characters of loadings acting on structures should be defined first. In this study, therefore, live load data on apartment buildings have collected and analyzed in a systematic manner, and their probabilistic characteristics have been studied. Based oil the results, the lifetime extreme values are computed and compared with current design loads. More rational design loads are suggested, which are more consistent in the probabilistic concepts.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.1
• /
• pp.38-45
• /
• 2009

Since the seventies and the oil crisis, energy-saving measures have led to a reduction in the ventilation of room. The use of synthetic materials which emit various chemical substances had led to an increase in the concentration of indoor pollutants. "Sick building syndrome (SBS)" and "Sick house syndrome (SHS)" are worldwide problems. Also, the number of complaints about indoor air pollution caused by VOCs (Volatile organic compound) and HCHO (Formaldehyde) has increased. It is important that evaluating and understanding emission of indoor air pollutant from building materials. The object of this study was to evaluate emission test method for flooring such as wood based flooring, carpet tile, rubber tile, PVC sheet and tile, and to determine emission of TVOC and form-aldehyde. The quantity of TVOC and carbonyl compounds emission were sampled and measured by Tenax TA and gas chromatography/mass spectrometry (GC/MSD), 2,4-DNPH cartrige with ozone scrubber and high performance liquid from flooring. The TVOC concentration emitted from carpet tile was ($7.419\;mg/m^2 h$) the highest among 5 groups of test materials. In wood based flooring and PVC tile, the emitted concentration of toluene was high. And the dodecane emission was highest in carpet. The concentration of TVOC decreased by an increase in emission test period. After 7 days, the concentration of TVOC from floorings were about 50% below of the concentration at the first day. TVOC emission from wood based flooring, carpet tile, rubber tile, PVC sheet and tile were decreased in 28 days and remained steady after about 15 days. The concentration of formaldehyde emission from floorings showed extremely low.