• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.365-368
• /
• 2001

This work describes a real-time method, based on motion energy detection, for detecting and tracking moving object in the consecutive image sequences. The motion of moving objects is detected by taking the difference of the two consecutive image frames. In addition an edge information of the current image is utilized in order to further increase the accuracy of detection. We can track the moving objects continuously by detecting the motion of objects from the sequence of image frames. A prototype system has been implemented using a TI TMS320C6201 EVM fixed-point DSP board, which can successfully track a moving human in real-time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.632-635
• /
• 2003

[ $(Ba,Sr,Ca)TiO_3$ ] powders, prepared by the sol-gel method, were mixed with organic vehicle and the BSCT thick films were fabricated by the screen printing techniques on alumina substrates. The dielectric properties were investigated for various composition ratio and $Nb_2O_5$ doping contents. All the BSCT thick films, sintered at $1420^{\circ}C$, showed the typical XRD patterns of a perovskite polycrystalline structure. The Curie temperature and the relative dielectric constant decreased with increasing Ca content and $Nb_2O_5$ doping amount. The relative dielectric constant, dielectric loss and tunability of the BSCT(50/40/10) thick films doped with 1.0wt% $Nb_2O_5$ were 1410, 0.65% and 17.29% respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.383-389
• /
• 1999

The purpose of this study was to investigate the effects of alloying and rolling condition on the mechanical properties and to develop high strength line pipe steels with good toughness. Tests were carried out by the laboratory experiments followed by mill trials and mass production. It was found that a small addition of microalloying elements, such as Nb, V with Mo or Ti remarkably increased the strength and toughness of hot strips. The optimum condition of thermomechanical rolling on low carbon microalloyed steel improved the toughness through the formation of a fine and uniform microstructure. Based on this mill trials following the fundamental research, the production technology of line pipe steels, grade X70∼X100 with high toughness, has been established. These grade steels exhibit excellent low temperature toughness (vTs= under -80$^{\circ}C$) and sufficient strength in both the base metal and the ERW seam weld position, respectively.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.165-168
• /
• 2003

본 연구에서는 마이크로파응용을 위한 이동통신기기용 안테나 모듈용 유전체재료 개발을 위해 $20\~80$의 중유전율을 가지는 글래스-세라믹스 복합체를 제조하고자 하였다. $BaO-Nd_2O_3-TiO_2$계 세라믹스를 기본조성으로 하고, $Na_2O-BaO-B_2O_3-P_2O_5$계 글래스 프릿의 첨가를 통해 제조된 글래스-세라믹스 복합체의 소결특성 및 유전특성을 조사하였다. 글래스 프릿을 5, 10, $15wt\%$ 첨가하였으며, $800\~950^{\circ}C$에서 각각 1시간동안 소결을 진행하였다. 그 결과로서 글래스 프릿의 한량이 증가하고, 소결온도가 높을수록 유전율$(\epsilon_r)$은 증가하였으며, 복합체의 결정특성은 감소함을 나타내었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.671-672
• /
• 2006

We have investigated the behavior of the ultrafast laser ablation of chromium films (200nm) on the silicon and pyrex-glass(corning 7740) substrate with respect to the laser fluence and the number of laser pulses. In addition, several experiments about ITO thin film were carried out with femto-second Ti:Sapphire laser (150fs). Finally, we introduce the ablation characteristic in accordance with materials of thin film and substrate.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1537-1539
• /
• 1997

In this study, the dielectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3$ Ceramics have been investigated as a addition of the amount of $MnO_2(0{\leq}x{\leq}0.9wt%)$. The Temperature-dependant dielectric characteristics of 0.9PMN-0.1PT relaxor ferroelectric system were improved by enhencing the extent of the diffuse phase transition(DPT). The maximum dielectric permittivity decreased by substitution $MnO_2$ and the dielectric loss decreased with increasing $MnO_2$ substitution amount. It is expected decreasing in inner heat energy for temperature with increasing $MnO_2$ substitution.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1078-1084
• /
• 2002

The formation temperature for the perovskite lead zirconate titanate [Pb(Zr,Ti)O3, PZT] derived from sol-gel route was lowered by more than $100^{\circ}C$ with the addition of crystallographically suitable seed particles, such as barium titanat e (BT) or PZT. We investigated the effect of seeding on the crystallization of perovskite phase and in the microstructure of the sol-gel derived PZT powder by varying the concentration, size and chemical species of seed particles. The phase transition as a function of temperature was monitored by DTA, XRD, and Raman spectroscopy, and the interface between the seed particle and grown PZT layer was analyzed by SEM and high resolution TEM techniques. It was found that both the heterogeneous and homogeneous nucleation contributes competitively in the formation of perovskite PZT grains.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.3
• /
• pp.141-143
• /
• 2017

Novel structured thin film transistors (TFTs) of amorphous silicon zinc tin oxide (a-SZTO) were designed and fabricated with a thin metal layer between the source and drain electrodes. A SZTO channel was annealed at $500^{\circ}C$. A Ti/Au electrode was used on the SZTO channel. Metals are deposited between the source and drain in this novel structured TFTs. The mobility of the was improved from $14.77cm^2/Vs$ to $35.59cm^2/Vs$ simply by adopting the novel structure without changing any other processing parameters, such as annealing condition, sputtering power or processing pressure. In addition, stability was improved under the positive bias thermal stress and negative bias thermal stress applied to the novel structured TFTs. Finally, this novel structured TFT was observed to be less affected by back-channel effect.

• Nuclear Engineering and Technology
• /
• v.30 no.1
• /
• pp.1-7
• /
• 1998

Effects of pH, bentonite and Portland cement on the leaching of the simulated waste glass were investigated. The simulated waste glass showed the low leach rate in the neutral pH region, while the leach rate in both acidic and alkaline regions increased. Addition of bentonite to the leachant enhanced the leaching of the waste glass. When the waste glass was leached at 72$^{\circ}C$ for 36 days in the ground water with gel state Na-bentonite, approximately 2.2${\mu}{\textrm}{m}$ of the surface was corroded out and the large amount of Ti, Nd, and Zr was observed on the surface. The amount of B leached from the simulated waste glass in the presence of domestic bentonite was about three times higher than that in the presence of Aldrich bentonite as well as Portland cement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.296-299
• /
• 2003

In this paper, $0.10Pb(Sb_{1/2}Sn_{1/2})O_3-0.25PbTiO_3-0.65PbZrO_3$ ceramics were fabricated by the mixed-oxide method. The sintering temperature and time were $1230^{\circ}C$ and 2[hr], respectively. The structural, dielectric and piezoelectric properties with addition of NiO were studied. The crystal structure of a specimen was rhombohedral. As a result of SEM, the average grain size were decreased with increasing the contents of NiO. But the grains of the specimens doped with 0.4wt% NiO were increased, due to deposits of excess NiO at grain boundaries in the liquid phase. Relative dielectric constant and dielectric loss of the specimen doped with 0.1wt% NiO were 701 and 0.026, respectively.